使用可引导的usb棒将IoT Base映像部署到SSD驱动器 [英] Deploy IoT Base image to SSD drive using a bootable usb stick

问题描述

我有一台带有SSD驱动器的Windows 10 IoT核心机器，我想创建一个可启动的USB，用IoT基本映像刷新SSD驱动器。我在网上做了一些研究，但遗憾的是找不到任何解决方案。

Hi, I have a Windows 10 IoT core machine with SSD drive and I would like to create a bootable usb to flash the SSD drive with IoT base image. I did some research online, but unfortunately could not find any solution.

目前，我们必须删除SSD驱动器，将其连接到开发人员计算机并使用DISM或Windows Iot Dashboard闪存ffu。但是，我想避免取出SSD驱动器的过程。如果有一种方法可以创建一个可启动的
USB，将它连接到IoT盒并将ffu闪存到SSD会更容易。

Currently, we have to remove the SSD drive, attach it to a developer machine and use DISM or Windows Iot Dashboard to flash the ffu. But, I would like to avoid the process of taking out the SSD drive. It would be much easier if there a way to create a bootable USB, connect it the IoT box and flash the ffu to SSD.

任何帮助都将受到高度赞赏！

Any help would be highly appreciated!

推荐答案

您可以创建自定义WinPE磁盘：  https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe-in​​tro 然后我们DISM安装FFU：

You can create a custom WinPE disk: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe-intro and then us DISM to install the FFU:

Dism.exe / Apply-Image /ImageFile:Flash.ffu /ApplyDrive:\\.\PhysicalDriveN / SkipPlatformCheck

Dism.exe /Apply-Image /ImageFile:Flash.ffu /ApplyDrive:\\.\PhysicalDriveN /SkipPlatformCheck

其中N是物理驱动器号

这篇关于使用可引导的usb棒将IoT Base映像部署到SSD驱动器的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！