Epson TM-TM88V内部蜂鸣器问题 [英] Epson TM-TM88V Internal Buzzer Issue

问题描述

我要求打印机（TM88V）在向厨房发送订单时发出哔哔声但没有掏出现金抽屉。这可以用十六进制代码吗？



亲切的问候



Adam

Hi,

I have requirement a printer (TM88V) beeps when an order is being sent to the kitchen but doesn''t shoot-out the cash drawer. Is this possible with a HEX Code?

Kind Regards

Adam

推荐答案

你实现这个目标的可能性很小。您可以尝试发送ASCII BEL（十六进制值0x07）而不包含任何其他字符。它包含在ESC / POS参考手册中，但不是爱普生推荐的。它不太可能工作，但尝试一下。



在Epson ESC / POS中定义了一个蜂鸣命令为ESC（A，但必须是其次是依赖于打印机型号的参数，您甚至可能需要更改DIP开关以启用蜂鸣声功能。

请参阅本文档 [ ^ ]。ESC（A控制蜂鸣器音调命令）记录在页面上398.你可以尝试看看你是否能够使它工作，但文件表明它不受TM-T88III打印机支持，但我不知道这是否意味着你的TM不支持T88V要么。



祝你好运

Soren Madsen

The chances of you getting this to work are slim. You can try sending an ASCII BEL (Hex value 0x07) without any other characters. It is included in the ESC/POS reference manual, but is not recommended by Epson. It is unlikely to work, but try it out.

There is a beep command defined in Epson ESC/POS as "ESC ( A", but this has to be followed by parameters that depend on the printer model and you might even have to change the DIP switch to enable the beep feature.
Refer to this document[^]. The "ESC ( A" Control Beeper Tones command is documented on page 398. You can try to see if you are able to get it working, but the document indicates that it is not supported by the TM-T88III printer, but I don''t know if that means it is not supported by your TM-T88V either.

Best of luck
Soren Madsen

这篇关于Epson TM-TM88V内部蜂鸣器问题的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！