如何检查xbee模块以分开PC? [英] How to check xbee module to separate PCs?
本文介绍了如何检查xbee模块以分开PC?的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!
问题描述
正确配置了我的x蜂模块后,我想通过回溯通信对其进行测试.
当两个模块都连接在单独的PC上时,如何使用超级终端对其进行测试?
我应该使用哪些特定的超级终端命令?
tnx ^ _ ^
After configuring properly the my x bee modules, I want to test it by look-back communication.
How can I test it using hyperterminal when both modules are connected on separate PCs?
What specific hyperterminal commands should I use?
tnx ^_^
推荐答案
您已经连接了一个XBee的DOUT和DIN引脚,对吗?该连接仅用于供电目的.
超级终端应设置为9600bps,无流量控制,8个数据位,1个停止位和无奇偶校验.然后,您只需键入即可.
You have one XBee''s DOUT and DIN pins connected, correct? This one is only connected for power purposes.
HyperTerminal should be set for 9600bps, no flow control, 8 data bits, 1 stop bit and no parity. Then you just type away.
这篇关于如何检查xbee模块以分开PC?的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!
查看全文