Window2000可以安装在SATA硬盘上吗? [英] Does Window2000 can install on a SATA Hard disk?

问题描述

大家好，

我已经购买了带有320GB SATA 3.0 Gb/s硬盘和本机命令队列的新台式机.我想知道我可以在该桌面上安装window2000吗?[confused]

问候
cocoonwls

Hi all,

I have purchased a new Desktop with 320GB SATA 3.0 Gb/s Hard Drive with Native Command Queuing. I would like to know can i install window2000 into this desktop?[confused]

regards
cocoonwls

推荐答案

如果您的问题仅与Windows 2000的安装有关，则可以继续将其安装在SATA硬盘上.不会有问题.

希望获得帮助:)

Hi,

If your question is related with installation of Windows 2000 only then you can go ahead and install it on SATA Hard Disk. There would not be an issue with that.

Hope this help:)

如果系统处于ATA兼容模式，则SATA控制器和磁盘看起来像BIOS和Windows的常规IDE磁盘.这样做没有问题.

但是，要利用本机命令队列之类的功能，需要新的高级控制器主机接口(AHCI)模式.如果启用此模式，则Windows需要驱动程序才能读取磁盘. (对于SCSI磁盘和控制器，RAID控制器以及不在标准位置的任何其他IDE控制器也是如此.)此外，如果从该磁盘引导，则它需要在驱动器中有一个名为ntbootdd.sys的驱动程序副本.与ntldr和boot.ini相同的位置(通常是驱动器C的根目录).如果没有正确的驱动程序来访问硬盘，并且内置支持不起作用，则Windows将使用INACCESSIBLE_BOOT_DEVICE代码蓝屏.

Windows 2000和XP需要软盘.在设置时可用，以提供其他存储驱动程序.提示时必须按一个键(从内存中F6)告诉安装程序您要加载其他驱动程序.一些新系统(通常不附带软盘驱动器)可以假装USB存储器密钥是用于此目的的软盘驱动器.

除非您具备良好的ATA兼容模式，否则我将坚持使用ATA兼容模式选择AHCI模式的原因. AHCI甚至可能不是BIOS设置中的选项-我的Dell系统不允许选择它.

If the system is in ATA-compatible mode the SATA controller and disk look like regular IDE disks to the BIOS and to Windows. There are no problems with this.

However, to make use of features like Native Command Queueing, the new Advanced Controller Host Interface (AHCI) mode is required. If this mode is enabled, Windows needs a driver in order to be able to read the disk. (This is also true of SCSI disks and controllers, RAID controllers and any additional IDE controllers that aren''t at the standard locations.) Also, if booting from that disk, it requires a copy of the driver named ntbootdd.sys in the same location as ntldr and boot.ini (typically the root of drive C). If the right driver to access the hard disk isn''t available and the built-in support doesn''t work, Windows will blue-screen with an INACCESSIBLE_BOOT_DEVICE code.

Windows 2000 and XP require a floppy disk to be made available at setup time to provide additional storage drivers. You have to press a key when prompted (F6, from memory) to tell Setup that you want to load additional drivers. Some new systems - which generally don''t come with floppy drives - can pretend that a USB memory key is a floppy drive for this purpose.

I''d stick with ATA-compatible mode unless you have good reason to select AHCI mode. AHCI may not even be an option in your BIOS setup - my Dell system doesn''t allow it to be selected.

这篇关于Window2000可以安装在SATA硬盘上吗?的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！