只能发送使用ISMB Java库/收到的消息一度 [英] Can only send / recieve message once using ISMB Java library

查看:491
本文介绍了只能发送使用ISMB Java库/收到的消息一度的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

我使用 HTTPS://$c$c.google。 COM / p / ISMB-SNEP-的Java /

我有一个问题,我只能发送或接收一次消息。

I have a problem that I can only send or receive a message once.

我可以发送消息到手机上,然后我必须拔下读卡器
然后重新插上,然后我可以重复这一过程(发送/接收)。

I can send a message to the phone, and then I have to unplug the reader and then plug it again, and then I can repeat the process (send / receive).

我觉得有一些东西正在对阅读器进行设定,而不是被取消设置。

如果我重复这个过程,没有拔下它并重新插入它时,会出现以下错误:

If I repeat the process without unplugging it and replugging it, the following error occurs:

Get factory
Get terminals
Terminal name: ACS ACR122 0
Available Commands: receive, send and quit
send
card: PC/SC card in ACS ACR122 0, protocol T=1, state OK
Exception in thread "main" java.lang.IllegalArgumentException: apdu must be at least 2 bytes long
    at javax.smartcardio.ResponseAPDU.check(Unknown Source)
    at javax.smartcardio.ResponseAPDU.<init>(Unknown Source)
    at sun.security.smartcardio.ChannelImpl.transmit(Unknown Source)
    at it.ismb.snep.IsmbSnepConnectionTarget.transceive(IsmbSnepConnectionTarget.java:113)
    at it.ismb.snep.IsmbSnepConnectionTarget.sendingProcedure(IsmbSnepConnectionTarget.java:160)
    at it.ismb.snep.NfcReader.<init>(NfcReader.java:76)
    at it.ismb.snep.NfcReader.main(NfcReader.java:39)
Protocol:T=1
Called Procedure to Send data .. TARGET MODE
[DEBUG] {sending   [56 bytes]} 0xFF 0x00 0x00 0x00 0x33 0xD4 0x8C 0x00 0x00 0x00 0x00 0x00 0x00 0x40 0x01 0xFE 0x0F 0xBB 0xBA 0xA6 0xC9 0x89 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0xFF 0x01 0xFE 0x0F 0xBB 0xBA 0xA6 0xC9 0x89 0x00 0x00 0x0F 0x46 0x66 0x6D 0x01 0x01 0x10 0x03 0x02 0x00 0x01 0x04 0x01 0x96 

这是什么问题?

public NfcReader() {            
     TerminalFactory factory;

     //List all available terminals          
     try {
         System.out.println("Get factory");
         factory = TerminalFactory.getDefault();
         System.out.println("Get terminals");
         terminals = factory.terminals().list();          
         if (terminals.size() == 0) {
             System.out.println("There are not terminals!");
             terminals = null;      
             System.exit(0);
         }
         else {
             terminal=terminals.get(0);
             System.out.println("Terminal name: "+terminal.getName());
             System.out.println("Available Commands: receive, send and quit");
         }  
    } 
    catch (CardException c) {
        System.out.print(c.getMessage());
        terminals = null;   
        System.exit(0);
    }        
    timer=new Timer();
    BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
    String line = "";

    while (line.equalsIgnoreCase("quit") == false) {
        try {
            line = in.readLine();
            if(line.compareTo("send")==0){
                setUp();
                n.sendingProcedure();


                try {
                    in.close();                             
                } catch (IOException e) { e.printStackTrace();} 
                System.exit(0);
            }
            else{   
                if(line.compareTo("receive")==0){                           
                    setUp();                        
                    n.receivingProcedure();

                    try {
                        in.close();                                 
                    } catch (IOException e) {e.printStackTrace();}  
                    System.exit(0);                         
                }
                else{
                    System.out.println("Command unknown!");
                    System.out.println("Supported commands are: send, receive and quit ");
                }   
            }
        } catch (IOException e) { e.printStackTrace();}                             
    }

    System.exit(0);


}


公共类IsmbSnepConnectionTarget {


public class IsmbSnepConnectionTarget {

    //USEFUL APDU COMMANDS 
    private final static byte TG_GET_DATA = (byte) 0x86;
    private final static byte TG_INIT_AS_TARGET = (byte) 0x8c;
    private final static byte TG_SET_DATA = (byte) 0x8e;
    private final static byte IN_JUMP_FOR_DEP = (byte) 0x56;
    private CardTerminal terminal;
    private CardChannel ch;
    private Card card;
    //  Enable debugMode to print info about the communication
    private boolean debugMode = false;

    //Set debug mode
    public void setDebugMode() {
            debugMode = true;
    }

    //Unset debug mode
    public void unsetDebugMode() {
            debugMode = false;
    }


    /**
     * Initialize SNEP Connection
     *
     * @param t
     *            a valid card terminal
     *
     * @throws IsmbSnepException
     *             if the terminal is incorrect
     */
    public IsmbSnepConnectionTarget(CardTerminal t) throws IsmbSnepException {
        if (t == null) {
                throw new IsmbSnepException("invalid card terminal");
        }
        terminal = t;                
        try {
             if (terminal.isCardPresent()) {                         
                 card = terminal.connect("*");                       
                 System.out.println("card: "+card);
                 ch = card.getBasicChannel();                   
                 System.out.println("Protocol:"+card.getProtocol());   
                 } 
             else {
                 throw new IsmbSnepException("Device not supported, only ACS ACR122 is supported now");
             }
        } catch (CardException e) { throw new IsmbSnepException("problem with connecting to reader");}       
    }

    /**
     * Sends and receives APDUs to and from the controller
     *
     * @param instr
     *            Instruction
     * @param param
     *            Payload to send
     *
     * @return The response payload 
     */
    private byte[] transceive(byte instr, byte[] payload) throws IsmbSnepException {

            if (ch == null) {
                    throw new IsmbSnepException("channel not open");
            }
            int payloadLength = (payload != null) ? payload.length : 0;
            byte[] instruction = { (byte) 0xd4, instr };

            //ACR122 header
            byte[] header = { (byte) 0xff, (byte) 0x00, (byte) 0x00, (byte) 0x00,
                            (byte) (instruction.length + payloadLength) };

            /* construct the command */
            byte[] cmd = Util.appendToByteArray(header, instruction, 0,
                            instruction.length);
            cmd = Util.appendToByteArray(cmd, payload);

            if (debugMode)
                    Util.debugAPDUs(cmd, null);

            try {
                    CommandAPDU c = new CommandAPDU(cmd);
                    ResponseAPDU r = ch.transmit(c);

                    byte[] ra = r.getBytes();

                    if (debugMode)
                            Util.debugAPDUs(null, ra);

                    /* check whether APDU command was accepted by the Controller */
                    if (r.getSW1() == 0x63 && r.getSW2() == 0x27) {
                            throw new CardException(
                                            "wrong checksum from contactless response");
                    } else if (r.getSW1() == 0x63 && r.getSW2() == 0x7f) {
                            throw new CardException("wrong PN53x command");
                    } else if (r.getSW1() != 0x90 && r.getSW2() != 0x00) {
                            throw new CardException("unknown error");
                    }
                    return Util.subByteArray(ra, 2, ra.length - 4);
            } catch (CardException e) {

                    throw new IsmbSnepException("problem with transmitting data");
            }
    }




    public void sendingProcedure(){
        System.out.println("Called Procedure to Send data .. TARGET MODE");         

        try {   
         //TG_INIT_AS_TARGET
         byte[] targetPayload = {   
                (byte) 0x00,   //MODE
                //(byte) 0x01, //PASSIVE MODE ONLY 
                (byte) 0x00, (byte) 0x00, (byte) 0x00, //MIFARE PARAMS 
                (byte) 0x00, (byte) 0x00, (byte) 0x40, //MIFARE PARAMS
                (byte) 0x01, (byte) 0xfe, (byte) 0x0f, (byte) 0xbb, (byte) 0xba, (byte) 0xa6, //FELICA PARAMS 
                (byte) 0xc9, (byte) 0x89, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, //FELICA PARAMS
                (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0xff, (byte) 0xff, //FELICA PARAMS
                (byte) 0x01, (byte) 0xfe, (byte) 0x0f, (byte) 0xbb, (byte) 0xba, //NFCID3t
                (byte) 0xa6, (byte) 0xc9, (byte) 0x89, (byte) 0x00, (byte) 0x00, //NFCID3t  
                (byte) 0x0F, //LEN Gt
                (byte) 0x46, (byte) 0x66, (byte) 0x6D, //LLCP WORD                  
                (byte) 0x01, (byte) 0x01, (byte) 0x10, //VERSION NUMBER
                (byte) 0x03, (byte) 0x02, (byte) 0x00, (byte) 0x01, //WELL KNOWN SERVICE LIST
                (byte) 0x04, (byte) 0x01, (byte) 0x96 //LINK TIMEOUT
             };                 
            transceive(TG_INIT_AS_TARGET, targetPayload);
        } catch (IsmbSnepException e) {e.printStackTrace();}      


        try {
            Thread.sleep(200);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try { 
             //GETDATA
             transceive(TG_GET_DATA, null);
        } catch (IsmbSnepException e) {e.printStackTrace();}    

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try { 
            byte[] targetPayload = { 
                        (byte)0x11, (byte)0x20,};   
            transceive(TG_SET_DATA, targetPayload);
         } catch (IsmbSnepException e) {e.printStackTrace();}

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try { 
            byte[] targetPayload = { 
                        (byte)0x00, (byte)0x00,};   
            transceive(TG_SET_DATA, targetPayload);
         } catch (IsmbSnepException e) {e.printStackTrace();}

        try {
             Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try {                       
            //GETDATA
            transceive(TG_GET_DATA, null);
        } catch (IsmbSnepException e) {e.printStackTrace();}    


        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try { 
            byte[] targetPayload = { 
                    (byte) 0x13, (byte) 0x20, //INFO LLCP        
                    (byte) 0x00, //SEQUENCE
                    (byte) 0x10, //VERSION                          
                    (byte) 0x02, //PUT                      
                    (byte)0x00, (byte)0x00, (byte)0x00, (byte)0x58, //SNEP LENGTH
                    (byte)0xD2, //NDEF FIRST BYTE
                    (byte)0x24, //TYPE LENGTH
                    (byte)0x31, //PAYLOAD LENGTH
                    //application/com.example.android.beam  
                    (byte)0x61, (byte)0x70, (byte)0x70, (byte)0x6C, (byte)0x69, 
                    (byte)0x63, (byte)0x61, (byte)0x74, (byte)0x69, (byte)0x6F, 
                    (byte)0x6E, (byte)0x2F, (byte)0x63, (byte)0x6F, (byte)0x6D, 
                    (byte)0x2E, (byte)0x65, (byte)0x78, (byte)0x61, (byte)0x6D, 
                    (byte)0x70, (byte)0x6C, (byte)0x65, (byte)0x2E, (byte)0x61, 
                    (byte)0x6E, (byte)0x64, (byte)0x72, (byte)0x6F, (byte)0x69,
                    (byte)0x64, (byte)0x2E, (byte)0x62, (byte)0x65, (byte)0x61, 
                    (byte)0x6D, 
                    //end of application/com.example.android.beam   
                    (byte)0x42,
                    (byte)0x65, (byte)0x61, (byte)0x6D, (byte)0x20, //Beam 
                    (byte)0x72,
                    (byte)0x65, (byte)0x63, (byte)0x65, (byte)0x69, (byte)0x76,
                    (byte)0x65, (byte)0x64, (byte)0x20, //received
                    (byte)0x66, (byte)0x72, (byte)0x6F, (byte)0x6D, (byte)0x20, //from
                    (byte)0x49, (byte)0x53, (byte)0x4D, (byte)0x42, (byte)0x20, //ISMB
                    (byte)0x53, (byte)0x4E, (byte)0x45, (byte)0x50, (byte)0x20, //SNEP
                    (byte)0x4C, (byte)0x49, (byte)0x42,                     
                    (byte)0x52, (byte)0x41, (byte)0x52,
                    (byte)0x59, (byte)0x3A, (byte)0x0A,
                    (byte)0x0A, //LIBRARY: /n
                    (byte)0x67, (byte)0x6F,
                    (byte)0x6F, (byte)0x64, (byte)0x20, //good
                    (byte)0x6C, (byte)0x75, (byte)0x63,
                    (byte)0x6B, (byte)0x21 //luck!
                    };  
                transceive(TG_SET_DATA, targetPayload);
        } catch (IsmbSnepException e) {e.printStackTrace();}

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try { 
             //GETDATA
             transceive(TG_GET_DATA, null); //RECEIVED RR
             //[DEBUG] {receiving [8 bytes]} 0xD5 0x87 0x00 0x83 0x44 0x01 0x90 0x00 
        } catch (IsmbSnepException e) {e.printStackTrace();}

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}


        //INVIO DISC
        try { 
            byte[] targetPayload = { 
                        (byte) 0x11, (byte) 0x60};  
            transceive(TG_SET_DATA, targetPayload);
         } catch (IsmbSnepException e) {e.printStackTrace();}

        try {
             Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try {   
            //GETDATA
            transceive(TG_GET_DATA, null);                  
        } catch (IsmbSnepException e) {e.printStackTrace();}
    }



    public void receivingProcedure(){
        System.out.println("Called new Procedure to receive data .. TARGET MODE");         

        try {
            byte[] targetPayload = { (byte) 0x01, (byte) 0x02,
                    (byte) 0x04,
                    (byte) 0x46, 
                    (byte) 0x66, (byte) 0x6D, (byte) 0x01, (byte) 0x01, (byte) 0x10,                                                                      
                    (byte) 0x03, (byte) 0x02, (byte) 0x00,
                    (byte) 0x01, (byte) 0x04, (byte) 0x01, (byte) 0x96              
            };          
             transceive(IN_JUMP_FOR_DEP, targetPayload);
        } catch (IsmbSnepException e) {e.printStackTrace();}      

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try { 
             //GETDATA
             transceive(TG_GET_DATA, null);
        } catch (IsmbSnepException e) {e.printStackTrace();}    

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        //WAIT FOR A  Connect request                                        
        while(true){
            try { 
                byte[] targetPayload = { (byte)0x00, (byte)0x00, }; 
                transceive(TG_SET_DATA, targetPayload);
            } catch (IsmbSnepException e) {e.printStackTrace();}

            try {
                Thread.sleep(300);
            } catch (InterruptedException e1) {e1.printStackTrace();}

            try { //GETDATA
                byte[]array = transceive(TG_GET_DATA, null);
                System.out.println("333333333333");
                if ((byte)array[1]==(byte)0xff){            //RECEIVE SOMETHING SIMILAR TO 0x11 0x20        
                    break;
                }                   
            } catch (IsmbSnepException e) {e.printStackTrace();}    

            try {
                System.out.println("444444444444444");
                Thread.sleep(300);
            } catch (InterruptedException e1) {e1.printStackTrace();}               
        }
        //SEND CC - CONNECTION COMPLETE              
        try { 
             byte[] targetPayload = { (byte)0x81, (byte)0x84};  
             transceive(TG_SET_DATA, targetPayload);
        }catch (IsmbSnepException e) {e.printStackTrace();}

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}   

        //WAIT FOR A SNEP REQUEST
        while(true){
            try { 
                byte[] targetPayload = { (byte)0x00, (byte)0x00, }; 
                transceive(TG_SET_DATA, targetPayload);
            } catch (IsmbSnepException e) {e.printStackTrace();}

            try {
                Thread.sleep(300);
            } catch (InterruptedException e1) {e1.printStackTrace();}

            try { //GETDATA
                byte[]array = transceive(TG_GET_DATA, null);
                if (array.length>=80){                                          
                    System.out.println("Something received: \n"+ Util.byteArrayToAsciiString(array));
                    break;                  
                }
             } catch (IsmbSnepException e) {e.printStackTrace();}   

             try {
                Thread.sleep(300);
            } catch (InterruptedException e1) {e1.printStackTrace();}               
        }           

        //SNEP REQUEST RECEIVED
        try { 
            byte[] targetPayload = { (byte)0x83, (byte)0x44,(byte)0x01 }; //Receive Ready   
            transceive(TG_SET_DATA, targetPayload);
         } catch (IsmbSnepException e) {e.printStackTrace();}

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try { //GETDATA
            byte[]array = transceive(TG_GET_DATA, null);                                        
        } catch (IsmbSnepException e) {e.printStackTrace();}        

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try {                                                      
            byte[] targetPayload = { (byte)0x83, (byte)0x04,(byte)0x01, (byte)0x10, (byte)0x81,     
                        (byte)0x00,(byte)0x00,(byte)0x00,(byte)0x00 //LENGTH
                    };  
            transceive(TG_SET_DATA, targetPayload);
        } catch (IsmbSnepException e) {e.printStackTrace();}        

        //WAIT FOR RR
        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try { //GETDATA
            byte[]array = transceive(TG_GET_DATA, null);                                        
        } catch (IsmbSnepException e) {e.printStackTrace();}

        try { 
            byte[] targetPayload = { (byte)0x00, (byte)0x00, }; 
            transceive(TG_SET_DATA, targetPayload);
        } catch (IsmbSnepException e) {e.printStackTrace();}

        try { //GETDATA
            byte[]array = transceive(TG_GET_DATA, null);                                        
        } catch (IsmbSnepException e) {e.printStackTrace();}

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try {                        
            byte[] targetPayload = { (byte)0x81, (byte)0xC4,(byte)0x00 }; //Disconnected Mode
            transceive(TG_SET_DATA, targetPayload);
        } catch (IsmbSnepException e) {e.printStackTrace();}

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}

        try { //GETDATA
            byte[]array = transceive(TG_GET_DATA, null);                                        
        } catch (IsmbSnepException e) {e.printStackTrace();}

        try {
            Thread.sleep(300);
        } catch (InterruptedException e1) {e1.printStackTrace();}
    }

}

推荐答案

我有同样的问题与银河S4(5.0.1)。

I have same problem with Galaxy S4(5.0.1).

我试图用老项目与NDEF协议( https://开头code.google.com / p / ISMB-NPP-的Java /

I tried to use old project with NDEF protocol ( https://code.google.com/p/ismb-npp-java/ )

它工作正常。

这篇关于只能发送使用ISMB Java库/收到的消息一度的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!

查看全文
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆