最新的SDK更新后HAXM不见了 [英] HAXM gone after latest SDK update

问题描述

哎哟。我使用HAXM与Android versoin 19相当的精细。项目小组希望使用Android 18.我有所回落。现在，HAXM不再显示在AVD管理器添加一个AVD也不在Android的目标项目的设置。好吧，我可以指出我的SDK到旧（2013年10月发布的ADT）SDK和haxm是那里工作。所以，我完全重新安装了ADT（20140321版本）。这仍然没有HAXM。重新安装HAXM，以防万一。

Ouch. I was using HAXM with Android versoin 19 quite fine. Project team wanted to use Android 18. I fell back. Now, HAXM no longer shows in AVD manager to add an AVD nor in Android Targets for project settings. Well, I can point my SDK to an old (oct 2013 release of adt) sdk and haxm is there and works. So, I totally reinstalled the ADT (20140321 version). That STILL doesn't have HAXM. Re-installed HAXM, just in case.

任何人都想出解决办法尚未：如何获得HAXM（86目标）与最新的ADT现身

Anyone figure this out yet: how to get HAXM (x86 target) to show up with latest adt?

推荐答案

当你已经走了回来，来到了最新的SDK，它可能已经混乱的预期在大多数情况下。
我相信你已经安装过SDK管理器HAXM SDK19安装后如下：

As you've gone back and came to the latest SDK, it might have messed-up as expected in most of the cases. I believe you've installed HAXM through SDK MAnager as follows after SDK19 installation:

• 启动了Android SDK管理器，选择附加功能，然后选择英特尔
  硬件加速执行管理器。和你在这里下载完成。

• Start the Android SDK Manager, select Extras and then select Intel Hardware Accelerated Execution Manager. and your download completed here.

你有没有执行这些步骤正确了吗？

Did you execute these steps correctly already ?

• /extras/intel/Hardware_Accelerated_Execution_Manager/IntelHAXM.exe。


• 按照屏幕上的指示完成安装。


• 安装完成后，确认虚拟化驱动程序打开一个命令提示符窗口，运行以下命令正确运行： SC查询intelhaxm

• /extras/intel/Hardware_Accelerated_Execution_Manager/IntelHAXM.exe.
• Follow the on-screen instructions to complete installation.
• After installation completes, confirm that the virtualization driver is operating correctly by opening a command prompt window and running the following command: sc query intelhaxm

如果您正在运行命令行模拟器，只需指定基于x86的AVD：模拟器-avd＆LT; avd_name＆GT;

If you are running the emulator from the command line, just specify an x86-based AVD: emulator -avd <avd_name>

同时执行上述命令之前，请确保您启用了系统中的虚拟化通过BIOS设置程序设置

Also before executing the commands mentioned above, ensure that you've enabled the 'Virtualization' in your system setting through BIOS setup

如果你按照上面正确提及的所有步骤，那么可以肯定，你应该能够看到HAXM上来了正常的AVD。只是在有需要的情况下，我分享了Android链接，以及：
这里输入链接的描述

If you follow all the steps mentioned above correctly, then surely you should be able to see your AVD with HAXM coming up normally. Just in case if required, I'm sharing the android link as well : enter link description here

这篇关于最新的SDK更新后HAXM不见了的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！