有效创建高密度区域的密度图，稀疏区域的点 [英] Efficiently create a density plot for high-density regions, points for sparse regions

问题描述

我需要制作一个功能类似于高密度区域的密度图的图，但低于某个阈值时将使用单个点.我在matplotlib缩略图库或Google搜索中找不到任何看起来与我需要的代码相似的代码.我有一个自己编写的工作代码，但是有点麻烦，并且(更重要的是)当点数/箱数很大时，花费的时间长得令人无法接受.这是代码:

I need to make a plot that functions like a density plot for high-density regions on the plot, but below some threshold uses individual points. I couldn't find any existing code that looked similar to what I need in the matplotlib thumbnail gallery or from google searches. I have a working code I wrote myself, but it is somewhat tricky and (more importantly) takes an unacceptably long time when the number of points/bins is large. Here is the code:

import numpy as np
import math
import matplotlib as mpl
import matplotlib.pyplot as plt
import pylab
import numpy.random

#Create the colormap:
halfpurples = {'blue': [(0.0,1.0,1.0),(0.000001, 0.78431373834609985, 0.78431373834609985),
(0.25, 0.729411780834198, 0.729411780834198), (0.5,
0.63921570777893066, 0.63921570777893066), (0.75,
0.56078433990478516, 0.56078433990478516), (1.0, 0.49019607901573181,
0.49019607901573181)],

    'green': [(0.0,1.0,1.0),(0.000001,
    0.60392159223556519, 0.60392159223556519), (0.25,
    0.49019607901573181, 0.49019607901573181), (0.5,
    0.31764706969261169, 0.31764706969261169), (0.75,
    0.15294118225574493, 0.15294118225574493), (1.0, 0.0, 0.0)],

    'red': [(0.0,1.0,1.0),(0.000001,
    0.61960786581039429, 0.61960786581039429), (0.25,
    0.50196081399917603, 0.50196081399917603), (0.5,
    0.41568627953529358, 0.41568627953529358), (0.75,
    0.32941177487373352, 0.32941177487373352), (1.0,
    0.24705882370471954, 0.24705882370471954)]} 

halfpurplecmap = mpl.colors.LinearSegmentedColormap('halfpurples',halfpurples,256)

#Create x,y arrays of normally distributed points
npts = 1000
x = numpy.random.standard_normal(npts)
y = numpy.random.standard_normal(npts)

#Set bin numbers in both axes
nxbins = 25
nybins = 25

#Set the cutoff for resolving the individual points
minperbin = 1

#Make the density histrogram
H, yedges, xedges = np.histogram2d(y,x,bins=(nybins,nxbins))
#Reorient the axes
H =  H[::-1]

extent = [xedges[0],xedges[-1],yedges[0],yedges[-1]]

#Compute all bins where the density plot value is below (or equal to) the threshold
lowxleftedges = [[xedges[i] for j in range(len(H[:,i])) if H[j,i] <= minperbin] for i in range(len(H[0,:]))] 
lowxrightedges = [[xedges[i+1] for j in range(len(H[:,i])) if H[j,i] <= minperbin] for i in range(len(H[0,:]))] 
lowyleftedges = [[yedges[-(j+2)] for j in range(len(H[:,i])) if H[j,i] <= minperbin] for i in range(len(H[0,:]))]
lowyrightedges = [[yedges[-(j+1)] for j in range(len(H[:,i])) if H[j,i] <= minperbin] for i in range(len(H[0,:]))]

#Flatten and convert to numpy array
lowxleftedges = np.asarray([item for sublist in lowxleftedges for item in sublist])
lowxrightedges = np.asarray([item for sublist in lowxrightedges for item in sublist])
lowyleftedges = np.asarray([item for sublist in lowyleftedges for item in sublist])
lowyrightedges = np.asarray([item for sublist in lowyrightedges for item in sublist])

#Find all points that lie in these regions
lowdatax = [[x[i] for j in range(len(lowxleftedges)) if lowxleftedges[j] <= x[i] and x[i] <= lowxrightedges[j] and lowyleftedges[j] <= y[i] and y[i] <= lowyrightedges[j]] for i in range(len(x))]
lowdatay = [[y[i] for j in range(len(lowyleftedges)) if lowxleftedges[j] <= x[i] and x[i] <= lowxrightedges[j] and lowyleftedges[j] <= y[i] and y[i] <= lowyrightedges[j]] for i in range(len(y))]

#Flatten and convert into numpy array
lowdatax = np.asarray([item for sublist in lowdatax for item in sublist])
lowdatay = np.asarray([item for sublist in lowdatay for item in sublist])

#Plot
fig1 = plt.figure()
ax1 = fig1.add_subplot(111)
ax1.plot(lowdatax,lowdatay,linestyle='.',marker='o',mfc='k',mec='k')
cp1 = ax1.imshow(H,interpolation='nearest',extent=extent,cmap=halfpurplecmap,vmin=minperbin)
fig1.colorbar(cp1)

fig1.savefig('contourtest.eps')

此代码生成的图像如下所示:

This code produces an image that looks like this:

但是，当用于较大的数据集时，该程序将花费几秒钟到几分钟.对如何加快速度有任何想法吗?谢谢！

However, when used on larger data sets the program takes several seconds to minutes. Any thoughts on how to speed this up? Thanks!

推荐答案

这应该做到:

import matplotlib.pyplot as plt, numpy as np, numpy.random, scipy

#histogram definition
xyrange = [[-5,5],[-5,5]] # data range
bins = [100,100] # number of bins
thresh = 3  #density threshold

#data definition
N = 1e5;
xdat, ydat = np.random.normal(size=N), np.random.normal(1, 0.6, size=N)

# histogram the data
hh, locx, locy = scipy.histogram2d(xdat, ydat, range=xyrange, bins=bins)
posx = np.digitize(xdat, locx)
posy = np.digitize(ydat, locy)

#select points within the histogram
ind = (posx > 0) & (posx <= bins[0]) & (posy > 0) & (posy <= bins[1])
hhsub = hh[posx[ind] - 1, posy[ind] - 1] # values of the histogram where the points are
xdat1 = xdat[ind][hhsub < thresh] # low density points
ydat1 = ydat[ind][hhsub < thresh]
hh[hh < thresh] = np.nan # fill the areas with low density by NaNs

plt.imshow(np.flipud(hh.T),cmap='jet',extent=np.array(xyrange).flatten(), interpolation='none', origin='upper')
plt.colorbar()   
plt.plot(xdat1, ydat1, '.',color='darkblue')
plt.show()

这篇关于有效创建高密度区域的密度图，稀疏区域的点的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！