C-如何在使用pjsip时解决此错误? [英] C - how to resolve this error while using pjsip?
本文介绍了C-如何在使用pjsip时解决此错误?的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
使用pjsip时出现此错误.如何解决呢?我的系统中有麦克风/扬声器，但无法获取设备.
I am getting this error while using pjsip. How to resolve this? i have mic/speaker in the system but its failing to get the device.
http://paste.ubuntu.com/6504337/
/* Create audio device parameter to open the device */
static pj_status_t create_aud_param(pjmedia_aud_param *param,
pjmedia_aud_dev_index capture_dev,
pjmedia_aud_dev_index playback_dev,
unsigned clock_rate,
unsigned channel_count,
unsigned samples_per_frame,
unsigned bits_per_sample)
{
pj_status_t status;
/* Normalize device ID with new convention about default device ID */
if (playback_dev == PJMEDIA_AUD_DEFAULT_CAPTURE_DEV)
playback_dev = PJMEDIA_AUD_DEFAULT_PLAYBACK_DEV;
/* Create default parameters for the device */
status = pjmedia_aud_dev_default_param(capture_dev, param);
if (status != PJ_SUCCESS) {
pjsua_perror(THIS_FILE, "Error retrieving default audio "
"device parameters", status);
return status;
}
param->dir = PJMEDIA_DIR_CAPTURE_PLAYBACK;
param->rec_id = capture_dev;
param->play_id = playback_dev;
param->clock_rate = clock_rate;
param->channel_count = channel_count;
param->samples_per_frame = samples_per_frame;
param->bits_per_sample = bits_per_sample;
/* Update the setting with user preference */
#define update_param(cap, field) \
if (pjsua_var.aud_param.flags & cap) { \
param->flags |= cap; \
param->field = pjsua_var.aud_param.field; \
}
update_param( PJMEDIA_AUD_DEV_CAP_INPUT_VOLUME_SETTING, input_vol);
update_param( PJMEDIA_AUD_DEV_CAP_OUTPUT_VOLUME_SETTING, output_vol);
update_param( PJMEDIA_AUD_DEV_CAP_INPUT_ROUTE, input_route);
update_param( PJMEDIA_AUD_DEV_CAP_OUTPUT_ROUTE, output_route);
#undef update_param
/* Latency settings */
param->flags |= (PJMEDIA_AUD_DEV_CAP_INPUT_LATENCY |
PJMEDIA_AUD_DEV_CAP_OUTPUT_LATENCY);
param->input_latency_ms = pjsua_var.media_cfg.snd_rec_latency;
param->output_latency_ms = pjsua_var.media_cfg.snd_play_latency;
/* EC settings */
if (pjsua_var.media_cfg.ec_tail_len) {
param->flags |= (PJMEDIA_AUD_DEV_CAP_EC | PJMEDIA_AUD_DEV_CAP_EC_TAIL);
param->ec_enabled = PJ_TRUE;
param->ec_tail_ms = pjsua_var.media_cfg.ec_tail_len;
} else {
param->flags &= ~(PJMEDIA_AUD_DEV_CAP_EC|PJMEDIA_AUD_DEV_CAP_EC_TAIL);
}
/* VAD settings */
if (pjsua_var.media_cfg.no_vad) {
param->flags &= ~PJMEDIA_AUD_DEV_CAP_VAD;
} else {
param->flags |= PJMEDIA_AUD_DEV_CAP_VAD;
param->vad_enabled = PJ_TRUE;
}
return PJ_SUCCESS;
}
错误:
14:13:41.786 pjsua_aud.c ..Error retrieving default audio device parameters: Unable to find default audio device (PJMEDIA_EAUD_NODEFDEV) [status=420006]
Exception: Object: {Account <sip:192.168.1.16:60791>}, operation=make_call(), error=Unable to find default audio device (PJMEDIA_EAUD_NODEFDEV)
检查我的系统是否具有播放和捕获设备(如您所见，以下内容显示了100％在没有pjsip的情况下工作):
Check if my system has playback and capture device or not (as you can see following shows 100% its working without pjsip):
sun@sun-M14xR2:/var/tmp/pjproject-2.1.0/pjsip/src/pjsua-lib$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: CA0132 Analog [CA0132 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
sun@sun-M14xR2:/var/tmp/pjproject-2.1.0/pjsip/src/pjsua-lib$ cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xd2710000 irq 47
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xd1000000 irq 17
2 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825
USB Device 0x46d:0x825 at usb-0000:00:14.0-4, high speed
sun@sun-M14xR2:/var/tmp/pjproject-2.1.0/pjsip/src/pjsua-lib$ gst-launch-0.10 -v alsasrc device=hw:2 ! audioresample ! audio/x-raw-int,rate=48000 ! autoaudiosink
Setting pipeline to PAUSED ...
/GstPipeline:pipeline0/GstAlsaSrc:alsasrc0: actual-buffer-time = 200000
/GstPipeline:pipeline0/GstAlsaSrc:alsasrc0: actual-latency-time = 10000
/GstPipeline:pipeline0/GstAlsaSrc:alsasrc0.GstPad:src: caps = audio/x-raw-int, endianness=(int)1234, signed=(boolean)true, width=(int)16, depth=(int)16, rate=(int)48000, channels=(int)1
Pipeline is live and does not need PREROLL ...
Setting pipeline to PLAYING ...
New clock: GstAudioSrcClock
/GstPipeline:pipeline0/GstAudioResample:audioresample0.GstPad:src: caps = audio/x-raw-int, endianness=(int)1234, signed=(boolean)true, width=(int)16, depth=(int)16, rate=(int)48000, channels=(int)1
/GstPipeline:pipeline0/GstAudioResample:audioresample0.GstPad:sink: caps = audio/x-raw-int, endianness=(int)1234, signed=(boolean)true, width=(int)16, depth=(int)16, rate=(int)48000, channels=(int)1
/GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:src: caps = audio/x-raw-int, endianness=(int)1234, signed=(boolean)true, width=(int)16, depth=(int)16, rate=(int)48000, channels=(int)1
/GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:sink: caps = audio/x-raw-int, endianness=(int)1234, signed=(boolean)true, width=(int)16, depth=(int)16, rate=(int)48000, channels=(int)1
/GstPipeline:pipeline0/GstAutoAudioSink:autoaudiosink0/GstPulseSink:autoaudiosink0-actual-sink-pulse.GstPad:sink: caps = audio/x-raw-int, endianness=(int)1234, signed=(boolean)true, width=(int)16, depth=(int)16, rate=(int)48000, channels=(int)1
/GstPipeline:pipeline0/GstAutoAudioSink:autoaudiosink0.GstGhostPad:sink: caps = audio/x-raw-int, endianness=(int)1234, signed=(boolean)true, width=(int)16, depth=(int)16, rate=(int)48000, channels=(int)1
/GstPipeline:pipeline0/GstAutoAudioSink:autoaudiosink0.GstGhostPad:sink.GstProxyPad:proxypad0: caps = audio/x-raw-int, endianness=(int)1234, signed=(boolean)true, width=(int)16, depth=(int)16, rate=(int)48000, channels=(int)1
/GstPipeline:pipeline0/GstAutoAudioSink:autoaudiosink0/GstPulseSink:autoaudiosink0-actual-sink-pulse: volume = 1.000000
/GstPipeline:pipeline0/GstAutoAudioSink:autoaudiosink0/GstPulseSink:autoaudiosink0-actual-sink-pulse: mute = FALSE
/GstPipeline:pipeline0/GstAutoAudioSink:autoaudiosink0/GstPulseSink:autoaudiosink0-actual-sink-pulse: volume = 1.000000
/GstPipeline:pipeline0/GstAutoAudioSink:autoaudiosink0/GstPulseSink:autoaudiosink0-actual-sink-pulse: mute = FALSE
WARNING: from element /GstPipeline:pipeline0/GstAlsaSrc:alsasrc0: Can't record audio fast enough
Additional debug info:
gstbaseaudiosrc.c(840): gst_base_audio_src_create (): /GstPipeline:pipeline0/GstAlsaSrc:alsasrc0:
Dropped 10560 samples. This is most likely because downstream can't keep up and is consuming samples too slowly.
WARNING: from element /GstPipeline:pipeline0/GstAlsaSrc:alsasrc0: Can't record audio fast enough
Additional debug info:
gstbaseaudiosrc.c(840): gst_base_audio_src_create (): /GstPipeline:pipeline0/GstAlsaSrc:alsasrc0:
Dropped 9600 samples. This is most likely because downstream can't keep up and is consuming samples too slowly.
推荐答案
您的问题与音频系统有关.大多数Linux系统在
Your problem is related to audio system. Most Linux systems run PulseAudio over Alsa, like yours (you can see this in GStreamer's logs) but pjsip by default enables PortAudio driver for Linux.
要解决此问题，您可以通过添加以下内容来启用可用的Alsa驱动程序:
To fix it, you can enable an available Alsa driver by adding:
#define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
#define PJMEDIA_AUDIO_DEV_HAS_ALSA 1
到pjlib/include/pj/config_site.h.如果它不存在，则可以按以下方式创建它:
To pjlib/include/pj/config_site.h. If it does not exist, you can create it like:
#define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
#define PJMEDIA_AUDIO_DEV_HAS_ALSA 1
#include <pj/config_site_sample.h>
然后重新构建(您只能直接重新构建pjmedia:在pjmedia/build文件夹中运行make).
And rebuild (you can directly rebuild only pjmedia: run make at pjmedia/build folder).
注意:可能有必要通过编辑pjmedia/build/os-linux.mak并将AC_PJMEDIA_SND设置为其他值(例如alsa)来禁用当前配置的驱动程序
Note: It may be possible that you've to disable currently configured driver by editing pjmedia/build/os-linux.mak and setting AC_PJMEDIA_SND to a different value (e.g. alsa)
这篇关于C-如何在使用pjsip时解决此错误?的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
