STM32CubeF7 BSP LCD尝试 [英] STM32CubeF7 BSP LCD attempt

问题描述

我正在尝试使用来自STM32CubeF7的BSP库在stm32f769i-disco的LED上显示字符串.但是，什么也没有发生.这是代码:

I'm trying to display a string on stm32f769i-disco's LED with BSP libraries from STM32CubeF7. However, nothing happens. Here is the code:

#include "stm32f7xx_hal.h"
#include "stm32f769i_discovery.h"
#include "stm32f769i_discovery_lcd.h"
#include "stm32f7xx.h"
#include <stdio.h>

char str[] = "Hello from BSP LCD demo!";

void LCDInit() {
    // Initialize the LCD using the BSP_LCD_Init() function.
    BSP_LCD_Init();

    // Select the LCD layer to be used using the BSP_LCD_SelectLayer() function.
    //BSP_LCD_SelectLayer(0);
    BSP_LCD_LayerDefaultInit(LTDC_DEFAULT_ACTIVE_LAYER, LCD_FB_START_ADDRESS);
    BSP_LCD_SelectLayer(LTDC_DEFAULT_ACTIVE_LAYER);

    // Enable the LCD display using the BSP_LCD_DisplayOn() function.
    BSP_LCD_DisplayOn();

    // Clear the whole LCD using BSP_LCD_Clear() function or only one specified string line using the BSP_LCD_ClearStringLine() function.
    BSP_LCD_Clear(LCD_COLOR_LIGHTGRAY);
    HAL_Delay(1000);

    BSP_LCD_SetBackColor(LCD_COLOR_LIGHTGRAY);
    BSP_LCD_SetTextColor(LCD_COLOR_WHITE);

    // Display a character on the specified line and column using the BSP_LCD_DisplayChar() function or a complete string line using the BSP_LCD_DisplayStringAtLine() function.
    BSP_LCD_DisplayStringAt(100, 100, str, CENTER_MODE);
}

int main(void) {
    LCDInit();
    BSP_LED_Init(LED_GREEN);

    while(1) {
        for (int i=0;i<1000000;i++);
        BSP_LED_Toggle(LED_GREEN);
    }

    return 0;
}

如果我取消对LCDInit的呼叫，我的LED会切换，如果我呼叫LCDInit，则什么也不会发生(LED不会切换)，并且LCD会保持黑色.有什么想法吗?

If I remove the call to LCDInit, my LED toggles, if I call the LCDInit, nothing happens (the LED doesn't toggle) and the LCD stays black. Any ideas?

我基本上已经尝试过stm32f769i_discovery_lcd.c中的指示，但是没有运气:

I've basically tried following the instructions in stm32f769i_discovery_lcd.c, without luck:

2. Driver description:
---------------------
  + Initialization steps:
     o Initialize the LCD using the BSP_LCD_Init() function.
     o Select the LCD layer to be used using the BSP_LCD_SelectLayer() function.
     o Enable the LCD display using the BSP_LCD_DisplayOn() function.

  + Options
     o Configure and enable the color keying functionality using the
       BSP_LCD_SetColorKeying() function.
     o Modify in the fly the transparency and/or the frame buffer address
       using the following functions:
       - BSP_LCD_SetTransparency()
       - BSP_LCD_SetLayerAddress()

  + Display on LCD
     o Clear the whole LCD using BSP_LCD_Clear() function or only one specified string
       line using the BSP_LCD_ClearStringLine() function.
     o Display a character on the specified line and column using the BSP_LCD_DisplayChar()
       function or a complete string line using the BSP_LCD_DisplayStringAtLine() function.
     o Display a string line on the specified position (x,y in pixel) and align mode
       using the BSP_LCD_DisplayStringAtLine() function.
     o Draw and fill a basic shapes (dot, line, rectangle, circle, ellipse, .. bitmap)
       on LCD using the available set of functions.

使用OpenOCD调试时，如果我在BSP_LCD_Init()行中设置断点，gdb将挂起.如果再次运行调试器，则可以看到程序卡在了WWDG_IRQHandler()上.

When debugging with OpenOCD, gdb hangs if I set the breakpoint at the BSP_LCD_Init() line. If I run the debugger again, I can see the program is stuck at the WWDG_IRQHandler ().

推荐答案

如果这对任何人都有帮助，我将发布原来是我的问题的内容(使用HAL库):

In case this ever helps anyone, I'm going to post what turned out to be my issue (with the HAL library):

我还没有特别添加任何处理重写中断处理程序的代码，结果甚至阻止了HAL_init()调用，因为我没有添加以下内容:

I have not particularly added any code that deals with overriding interrupt handlers, turns out even the HAL_init() call was blocked, because I had not added the following:

void SysTick_Handler(void)
{
     HAL_IncTick();
}

因此，我的HAL_Delay会一直等待.刚开始时，最好使用STM32CubeF7 templates文件夹中提供的模板，这样您就不会像我一样犯同样的错误.

Because of this, my HAL_Delay's would be waiting forever. Probably best to use the templates provided in the STM32CubeF7 templates folder, when starting out, so you don't make the same mistakes as I did..

这篇关于STM32CubeF7 BSP LCD尝试的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！