如何在目标板(Xilinx的Zedboard)中运行在REDHawk IDE中开发的波形? [英] How to run waveform developed in REDHawk IDE in my target board ( Zedboard by Xilinx)?

问题描述

我在运行Centos6.8的开发PC上使用Redhawk IDE开发了SCA组件HelloWorld.现在，我想在目标硬件上运行它，即运行Ubuntu嵌入式Linux操作系统的 Zedboard .

I have developed an SCA component HelloWorld using Redhawk IDE on my development PC running Centos6.8. Now I want to run it on my target hardware i.e. Zedboard running Ubuntu embedded Linux OS.

推荐答案

如前所述，尝试在Zedboard上或通过仿真器进行本机编译都是一种可行的方法.但是，文档中不再列出最新版本的REDHAWK的Ubuntu说明.这在很大程度上还取决于Ubuntu的ARM端上提供了哪些开发库.这可能使您不得不本地编译需要大量修补程序的东西.

As the previous response mentioned, trying to compile it all natively on the Zedboard or via emulator is certainly one way to go. However the Ubuntu instructions for the latest version of REDHAWK are no longer listed in the documentation. It would also largely depend on what development libraries are available on the ARM side of Ubuntu. It might leave you having to compile something natively that requires a good amount of patching.

正如Youssef所述，从许多方面来说，Yocto/OE路线都比较容易，因为您可以在Zedboard上添加要在本地运行的各种设备和组件的配方.

As Youssef mentioned, in many ways it is easier to go the Yocto/OE route since you can add in recipes for the various devices and components you want to run locally, on the Zedboard.

我们倾向于使用Google存储库像这样的清单.自述文件涵盖了步骤，这些步骤也包含在演示中，以及在后续步骤中我们切换到MicroZed作为下一个目标.沿着这条路线，您将最终获得一个构建环境，用于将REDHAWK 2.0.4以及许多其他东西引导到Zedboard.

We tend to build out from using a Google repo manifest like this one. The README covers the steps, which are also in a demo as well as a follow-on where we switch to the MicroZed as a the next target. Going this route, you'll end up with a build environment for bootstrapping REDHAWK 2.0.4 onto the Zedboard along with many other things.

这篇关于如何在目标板(Xilinx的Zedboard)中运行在REDHawk IDE中开发的波形?的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！