Android WifiManager.addNetwork()返回-1 [英] Android WifiManager.addNetwork() returns -1
问题描述
我正在编写一个将连接到特定WPA接入点的android应用,当连接时,它将发出http调用.它不会保存网络配置. 我已经阅读了几乎所有关于连接wifi网络的堆栈溢出问题,但找不到适合我的答案.这是我用来连接的代码.
I am writing an android app which will connect to a specific WPA access point, when connected, it will issue a http call. It will not save the network config. I have read almost every post on stack overflow on connecting to wifi network but can't find the answer which works for me. Here is the code I am using to connect..
WifiConfiguration wc = new WifiConfiguration();
wc.allowedAuthAlgorithms.clear();
wc.allowedGroupCiphers.clear();
wc.allowedPairwiseCiphers.clear();
wc.allowedProtocols.clear();
wc.allowedKeyManagement.clear();
wc.SSID = "\"".concat("<ssid>").concat("\"");
wc.preSharedKey = "\"".concat("<password>").concat("\"");
wc.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.TKIP);
wc.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.CCMP);
wc.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.WEP40);
wc.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.WEP104);
wc.allowedKeyManagement.set(WifiConfiguration.KeyMgmt.WPA_PSK);
wc.allowedPairwiseCiphers.set(WifiConfiguration.PairwiseCipher.CCMP);
wc.allowedPairwiseCiphers.set(WifiConfiguration.PairwiseCipher.TKIP);
wc.allowedProtocols.set(WifiConfiguration.Protocol.RSN); // For WPA2
wc.allowedProtocols.set(WifiConfiguration.Protocol.WPA); // For WPA
wc.priority = 0;
//wc.hiddenSSID = true;
wc.status = WifiConfiguration.Status.ENABLED;
// connect to and enable the connection
WifiManager wifiManager = (WifiManager) getSystemService(this.WIFI_SERVICE);
int netId = wifiManager.addNetwork(wc);
boolean wifiEnabled = wifiManager.enableNetwork(netId, true);
wifiManager.setWifiEnabled(true);
Log.d("opener", "addNetwork returned " + netId);
if (netId > 0) {
wifiId = netId;
}
但是netId始终为-1.我已经在两种不同的手机(ICS:HTC Rezound和GingerBread:Motorola DroidX)上进行了尝试.两者都显示完全相同的结果. 我在做什么错了?
However netId is always -1. I have tried it on two different phones (ICS:HTC Rezound and GingerBread:Motorola DroidX). Both show exactly same results. What am I doing wrong?
我在WPA2接入点上尝试了相同的代码,但结果却很奇怪.运行此代码时,第一次将返回-1,但是如果我第二次调用相同的方法且延迟1秒,则它将返回有效的netId.问题是
I tried same code with WPA2 access point and got very weird results. When this code was run, first time it would return -1, but if I call same method second time with a delay of 1 second, it would return valid netId. So the questions are
- 为什么上面的代码无法连接到wpa?
- 在wpa2中,为什么需要两次调用上述方法才能建立连接?我观察到我必须连接多次才能建立连接.有时需要3-4次连接.因此,到目前为止,我一直循环播放,直到添加配置返回> 0 id.
推荐答案
可能有点晚,但是尝试将其连接到Open/WPA/WPA2/WEP安全网络
Possibly a bit late but try this to connect to Open/WPA/WPA2/WEP secured networks
WifiConfiguration wifiConfig = new WifiConfiguration();
wifiConfig.SSID = selectedNetwork.SSID();
wifiConfig.status = WifiConfiguration.Status.DISABLED;
wifiConfig.priority = 40;
// Dependent on the security type of the selected network
// we set the security settings for the configuration
if (/*Open network*/) {
// No security
wifiConfig.allowedKeyManagement.set(WifiConfiguration.KeyMgmt.NONE);
wifiConfig.allowedProtocols.set(WifiConfiguration.Protocol.RSN);
wifiConfig.allowedProtocols.set(WifiConfiguration.Protocol.WPA);
wifiConfig.allowedAuthAlgorithms.clear();
wifiConfig.allowedPairwiseCiphers.set(WifiConfiguration.PairwiseCipher.CCMP);
wifiConfig.allowedPairwiseCiphers.set(WifiConfiguration.PairwiseCipher.TKIP);
wifiConfig.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.WEP40);
wifiConfig.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.WEP104);
wifiConfig.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.CCMP);
wifiConfig.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.TKIP);
} else if (/*WPA*/ || /*WPA2*/) {
//WPA/WPA2 Security
wifiConfig.allowedProtocols.set(WifiConfiguration.Protocol.RSN);
wifiConfig.allowedProtocols.set(WifiConfiguration.Protocol.WPA);
wifiConfig.allowedKeyManagement.set(WifiConfiguration.KeyMgmt.WPA_PSK);
wifiConfig.allowedPairwiseCiphers.set(WifiConfiguration.PairwiseCipher.CCMP);
wifiConfig.allowedPairwiseCiphers.set(WifiConfiguration.PairwiseCipher.TKIP);
wifiConfig.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.WEP40);
wifiConfig.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.WEP104);
wifiConfig.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.CCMP);
wifiConfig.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.TKIP);
wifiConfig.preSharedKey = "\"".concat(password).concat("\"");
} else if (/*WEP*/) {
// WEP Security
wifiConfig.allowedKeyManagement.set(WifiConfiguration.KeyMgmt.NONE);
wifiConfig.allowedProtocols.set(WifiConfiguration.Protocol.RSN);
wifiConfig.allowedProtocols.set(WifiConfiguration.Protocol.WPA);
wifiConfig.allowedAuthAlgorithms.set(WifiConfiguration.AuthAlgorithm.OPEN);
wifiConfig.allowedAuthAlgorithms.set(WifiConfiguration.AuthAlgorithm.SHARED);
wifiConfig.allowedPairwiseCiphers.set(WifiConfiguration.PairwiseCipher.CCMP);
wifiConfig.allowedPairwiseCiphers.set(WifiConfiguration.PairwiseCipher.TKIP);
wifiConfig.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.WEP40);
wifiConfig.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.WEP104);
if (getHexKey(password)) wifiConfig.wepKeys[0] = password;
else wifiConfig.wepKeys[0] = "\"".concat(password).concat("\"");
wifiConfig.wepTxKeyIndex = 0;
}
// Finally we add the new configuration to the managed list of networks
int networkID = wifiMan.addNetwork(wifiConfig);
很明显,请为适用的不同安全类型设置自己的变量.连接到WEP安全网络的密钥(请原谅)是如下所述的getHexKey方法.
Obviously set your own variables for the different security types as applicable. The key (pardon the pun) to connecting to a WEP secured network is the getHexKey method as below.
/**
* WEP has two kinds of password, a hex value that specifies the key or
* a character string used to generate the real hex. This checks what kind of
* password has been supplied. The checks correspond to WEP40, WEP104 & WEP232
* @param s
* @return
*/
private static boolean getHexKey(String s) {
if (s == null) {
return false;
}
int len = s.length();
if (len != 10 && len != 26 && len != 58) {
return false;
}
for (int i = 0; i < len; ++i) {
char c = s.charAt(i);
if ((c >= '0' && c <= '9') || (c >= 'a' && c <= 'f') || (c >= 'A' && c <= 'F')) {
continue;
}
return false;
}
return true;
}
这篇关于Android WifiManager.addNetwork()返回-1的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!