硒网格在节点端口而不是集线器端口上侦听 [英] selenium grid listening on node port instead of hub port

问题描述

为进行测试，我在不同端口上本地运行网格和节点.

For my test, I am running grid and node locally on different ports.

java -jar /usr/bin/selenium-server.jar -port 4444 -role hub
java -jar /usr/bin/selenium-server.jar -role node -hub http://127.0.0.1:4444/grid/register -port 5556

因此，网格在4444上运行，而节点在5556上运行.

So, the grid is running on 4444 and node is running on 5556.

在我的测试中，如果我以以下身份启动驱动程序

In my test, if i start the driver as

driver = webdriver.Remote(command_executor='http://127.0.0.1:4444/wd/hub', desired_capabilities=desired_capabilities)

然后测试失败，并出现异常

then the test fails with the exception

response = {'status': 500, 'value': '{"status":13,"value":{"class":"java.lang.NullPointerException","stackTrace":[{"fileName":"Ha...n","lineNumber":590},{"fileName":"Thread.java","className":"java.lang.Thread","methodName":"run","lineNumber":745}]}}'}

如果我在节点端口5555而不是集线器端口4444上运行测试，则测试通过，如下所示

The test passed if i run the test on the node port 5555, instead of the hub port 4444, as shown below

driver = webdriver.Remote(command_executor='http://127.0.0.1:5555/wd/hub', desired_capabilities=desired_capabilities)

我认为，我们应该在集线器端口上运行测试，在本例中为4444，而不是5555.

I was of the opinion that, we should be running the tests on the hub port, which in this case is 4444 and not 5555.

如果我错了，请纠正我.

Please correct me if i am wrong.

推荐答案

如果您打算通过 Grid 配置中使用 Selenium > 和 Node 配置，建议您使用最新的 selenium-server-standalone-3.6.0 jar，如下所示:

If you intend to use Selenium in Grid configuration through Hub and Node configuration, I would suggest you to use the most recent selenium-server-standalone-3.6.0 jar as follows:

1. 启动 Selenium Grid Hub (默认情况下在端口4444上):

1. Start the Selenium Grid Hub (by default on port 4444) :

java -jar selenium-server-standalone-3.6.0.jar -role hub

确认 Selenium Grid Hub 已启动:

Confirm the Selenium Grid Hub is started:

16:06:29.891 INFO - Nodes should register to http://192.168.1.48:4444/grid/register/
16:06:29.891 INFO - Selenium Grid hub is up and running

访问 Selenium Grid Hub Console 并确保 Selenium Grid Hub 已启动并运行:

Access the Selenium Grid Hub Console and ensure Selenium Grid Hub is up and running:

http://localhost:4444/grid/console

为Mozilla/GeckoDriver启动 Selenium Grid Node (默认在端口5555上):

Start the Selenium Grid Node (by default on port 5555) for Mozilla/GeckoDriver:

java -Dwebdriver.gecko.driver=geckodriver.exe -jar selenium-server-standalone-3.6.0.jar -role node -hub http://localhost:4444/grid/register

确认 Selenium Grid Node 已注册并启动:

Confirm the Selenium Grid Node is registered and started:

16:15:54.696 INFO - Selenium Grid node is up and ready to register to the hub
16:15:54.742 INFO - Starting auto registration thread. Will try to register every 5000 ms.
16:15:54.742 INFO - Registering the node to the hub: http://localhost:4444/grid/register
16:15:54.975 INFO - The node is registered to the hub and ready to use

使用 Testcase 和 DesiredCapabilities 执行，如下所示:

Execute with the Testcase with DesiredCapabilities as follows:

self.driver = webdriver.Remote(command_executor='http://127.0.0.1:4444/wd/hub', desired_capabilities=caps)

在成功执行 Testcase 时，请观察以以下结尾的控制台日志:

Observe the console logs ending with the following on successful execution of your Testcase:

16:23:50.590 INFO - Found handler: org.openqa.selenium.remote.server.ServicedSession@37ff9771
16:23:50.590 INFO - Handler thread for session 31a1dcb0-8bed-40fb-acdb-d5be19f03ba2 (firefox): Executing DELETE on /session/31a1dcb0-8bed-40fb-acdb-d5be19f03ba2
 (handler: ServicedSession)
1506941630595   Marionette      INFO    New connections will no longer be accepted

这篇关于硒网格在节点端口而不是集线器端口上侦听的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！