Scenekit形状在4点之间 [英] Scenekit shape between 4 points

问题描述

鉴于我在上一个问题中所采用的路线:

Given that the route I was taking in a previous question:

ARKit -在Swift 3的平面上的2个矢量点之间放置一个SCNPlane

...似乎有缺陷，我正在寻找其他选择.我可以在2个节点之间画一条线，然后可以在它们上面有效地在一个正方形中创建节点，但是即使我在所有这些节点之间画线，也无法将其变成一个形状.是否可以在Scenekit中绘制4个角中的每个角均连接到节点的形状(正方形).

...seems to be flawed, I'm looking at other options. I can draw a line between 2 nodes, I can then create nodes above those, effectively in a square but even if I draw lines between them all, I can't make that into a shape. Is it possible in Scenekit to draw a shape (square) where each of the 4 corners joins to a node.

我可以创建一个平面，将其放置在节点上，变换枢轴，然后旋转，但是它并不总是起作用，但是SCNGeometry线可以.

I can create a plane, position it on a node, transform the pivot and then rotate but it doesn't always work but SCNGeometry lines do.

谢谢

推荐答案

所以答案，至少我的解决方案是使用SCNGeometry三角形.我想在增强现实中使用正方形(而不是立方体)作为墙，所以我仅使用映射墙的四个角的4个节点来构建2个三角形.

So the answer, at least my solution is to use SCNGeometry triangles. I wanted a square (rather than a cube) to act as a wall in Augmented Reality so I simply built 2 triangles using the 4 nodes that mapped the 4 corners of a wall.

建立三角形的类:

extension SCNGeometry {

    class func triangleFrom(vector1: SCNVector3, vector2: SCNVector3, vector3: SCNVector3) -> SCNGeometry {

        let indices: [Int32] = [0, 1, 2]

        let source = SCNGeometrySource(vertices: [vector1, vector2, vector3])

        let element = SCNGeometryElement(indices: indices, primitiveType: .triangles)

        return SCNGeometry(sources: [source], elements: [element])
    }
}

两个三角形的点分别是[p1，p2，p4]和[p1，p3，p4]，其用法如下:

The points for the 2 triangles are [p1, p2, p4] and [p1, p3, p4] called using the following:

let thirdPoint = firstPoint.clone()
thirdPoint.position = SCNVector3Make(thirdPoint.position.x, 
thirdPoint.position.y + Float(1.5), thirdPoint.position.z)
sceneView.scene.rootNode.addChildNode(thirdPoint)

let fourthPoint = secondPoint.clone()
fourthPoint.position = SCNVector3Make(fourthPoint.position.x, 
fourthPoint.position.y + Float(1.5), fourthPoint.position.z)
sceneView.scene.rootNode.addChildNode(fourthPoint)

let triangle = SCNGeometry.triangleFrom(vector1: firstPoint.position, vector2: secondPoint.position, vector3: fourthPoint.position)
let triangleNode = SCNNode(geometry: triangle)
triangleNode.geometry?.firstMaterial?.diffuse.contents = UIColor.blue
triangleNode.geometry?.firstMaterial?.isDoubleSided = true
sceneView.scene.rootNode.addChildNode(triangleNode)

let triangle2 = SCNGeometry.triangleFrom(vector1: firstPoint.position, vector2: thirdPoint.position, vector3: fourthPoint.position)
let triangle2Node = SCNNode(geometry: triangle2)
triangle2Node.geometry?.firstMaterial?.diffuse.contents = UIColor.blue
triangle2Node.geometry?.firstMaterial?.isDoubleSided = true
sceneView.scene.rootNode.addChildNode(triangle2Node)

这都是基于在ARKit中选择墙的底部2个点来创建2个初始节点的情况.

This is all based on creating 2 initial nodes by selecting the bottom 2 points of a wall in ARKit.

希望对寻找相似答案的其他人都有意义.

Hope that makes sense to anybody else searching for a similar answer.

添加材料

这里的扩展名稍有不同，向其添加材料的代码也一样，墙的最终结果保持不变:

Here's a slightly different extension and the code to add a material to it, the end result of a wall remains the same:

extension SCNGeometry {

    class func Quad() -> SCNGeometry {

        let verticesPosition = [
            SCNVector3(x: -0.242548823, y: -0.188490361, z: -0.0887458622),
            SCNVector3(x: -0.129298389, y: -0.188490361, z: -0.0820985138),
            SCNVector3(x: -0.129298389, y: 0.2, z: -0.0820985138),
            SCNVector3(x: -0.242548823, y: 0.2, z: -0.0887458622)
        ]

        let textureCord = [
            CGPoint(x: 1, y: 1),
            CGPoint(x: 0, y: 1),
            CGPoint(x: 0, y: 0),
            CGPoint(x: 1, y: 0),
        ]

        let indices: [CInt] = [
            0, 2, 3,
            0, 1, 2
        ]

        let vertexSource = SCNGeometrySource(vertices: verticesPosition)
        let srcTex = SCNGeometrySource(textureCoordinates: textureCord)
        let date = NSData(bytes: indices, length: MemoryLayout<CInt>.size * indices.count)

        let scngeometry = SCNGeometryElement(data: date as Data, 
primitiveType: SCNGeometryPrimitiveType.triangles, primitiveCount: 2, 
bytesPerIndex: MemoryLayout<CInt>.size)

        let geometry = SCNGeometry(sources: [vertexSource,srcTex], 
elements: [scngeometry])

        return geometry


    }

}

然后只需在viewDidLoad()中调用它并应用材质

Then simply call it in viewDidLoad() and apply a material

let scene = SCNScene()

let quad = SCNGeometry.Quad()

let (min, max) = quad.boundingBox

let width = CGFloat(max.x - min.x)
let height = CGFloat(max.y - min.y)

quad.firstMaterial?.diffuse.contents = UIImage(named: "wallpaper.jpg")
quad.firstMaterial?.diffuse.contentsTransform = SCNMatrix4MakeScale(Float(width), Float(height), 1)
quad.firstMaterial?.diffuse.wrapS = SCNWrapMode.repeat
quad.firstMaterial?.diffuse.wrapT = SCNWrapMode.repeat

let node = SCNNode()
node.geometry = quad
scene.rootNode.addChildNode(node)

sceneView.scene = scene

这篇关于Scenekit形状在4点之间的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！