如何在文件CSV中写入许多行？ [英] How can I write many rows in my file CSV?
本文介绍了如何在文件CSV中写入许多行？的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
如何创建 .csv 文件？我要在此 .csv 中写入数据包的信息。
这是我的代码： https://www.tcpdump.org/sniffex.c
我想在文件 .csv 中写入一些打印内容，例如 ip ， tcp 等。
How can I create a .csv file? In this .csv I want to write information of the packets.
This is my code: https://www.tcpdump.org/sniffex.c
I want to write into my file .csv some prints, for example the ip, tcp, etc.
这是我以前的问题：如何创建文件.csv？
#define APP_NAME "sniffex"
#define APP_DESC "Sniffer example using libpcap"
#define APP_COPYRIGHT "Copyright (c) 2005 The Tcpdump Group"
#define APP_DISCLAIMER "THERE IS ABSOLUTELY NO WARRANTY FOR THIS PROGRAM."
#include <pcap.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
/* default snap length (maximum bytes per packet to capture) */
#define SNAP_LEN 1518
/* ethernet headers are always exactly 14 bytes [1] */
#define SIZE_ETHERNET 14
/* Ethernet addresses are 6 bytes */
#define ETHER_ADDR_LEN 6
FILE *f = fopen("test", "w");
/* Ethernet header */
struct sniff_ethernet {
u_char ether_dhost[ETHER_ADDR_LEN]; /* destination host address */
u_char ether_shost[ETHER_ADDR_LEN]; /* source host address */
u_short ether_type; /* IP? ARP? RARP? etc */
};
/* IP header */
struct sniff_ip {
u_char ip_vhl; /* version << 4 | header length >> 2 */
u_char ip_tos; /* type of service */
u_short ip_len; /* total length */
u_short ip_id; /* identification */
u_short ip_off; /* fragment offset field */
#define IP_RF 0x8000 /* reserved fragment flag */
#define IP_DF 0x4000 /* dont fragment flag */
#define IP_MF 0x2000 /* more fragments flag */
#define IP_OFFMASK 0x1fff /* mask for fragmenting bits */
u_char ip_ttl; /* time to live */
u_char ip_p; /* protocol */
u_short ip_sum; /* checksum */
struct in_addr ip_src,ip_dst; /* source and dest address */
};
#define IP_HL(ip) (((ip)->ip_vhl) & 0x0f)
#define IP_V(ip) (((ip)->ip_vhl) >> 4)
/* TCP header */
typedef u_int tcp_seq;
struct sniff_tcp {
u_short th_sport; /* source port */
u_short th_dport; /* destination port */
tcp_seq th_seq; /* sequence number */
tcp_seq th_ack; /* acknowledgement number */
u_char th_offx2; /* data offset, rsvd */
#define TH_OFF(th) (((th)->th_offx2 & 0xf0) >> 4)
u_char th_flags;
#define TH_FIN 0x01
#define TH_SYN 0x02
#define TH_RST 0x04
#define TH_PUSH 0x08
#define TH_ACK 0x10
#define TH_URG 0x20
#define TH_ECE 0x40
#define TH_CWR 0x80
#define TH_FLAGS (TH_FIN|TH_SYN|TH_RST|TH_ACK|TH_URG|TH_ECE|TH_CWR)
u_short th_win; /* window */
u_short th_sum; /* checksum */
u_short th_urp; /* urgent pointer */
};
void
got_packet(u_char *args, const struct pcap_pkthdr *header, const u_char *packet);
void
print_payload(const u_char *payload, int len);
void
print_hex_ascii_line(const u_char *payload, int len, int offset);
void
print_app_banner(void);
void
print_app_usage(void);
/*
* app name/banner
*/
void
print_app_banner(void)
{
printf("%s - %s\n", APP_NAME, APP_DESC);
printf("%s\n", APP_COPYRIGHT);
printf("%s\n", APP_DISCLAIMER);
printf("\n");
return;
}
/*
* print help text
*/
void
print_app_usage(void)
{
printf("Usage: %s [interface]\n", APP_NAME);
printf("\n");
printf("Options:\n");
printf(" interface Listen on <interface> for packets.\n");
printf("\n");
return;
}
/*
* print data in rows of 16 bytes: offset hex ascii
*
* 00000 47 45 54 20 2f 20 48 54 54 50 2f 31 2e 31 0d 0a GET / HTTP/1.1..
*/
void
print_hex_ascii_line(const u_char *payload, int len, int offset)
{
int i;
int gap;
const u_char *ch;
/* offset */
printf("%05d ", offset);
/* hex */
ch = payload;
for(i = 0; i < len; i++) {
printf("%02x ", *ch);
ch++;
/* print extra space after 8th byte for visual aid */
if (i == 7)
printf(" ");
}
/* print space to handle line less than 8 bytes */
if (len < 8)
printf(" ");
/* fill hex gap with spaces if not full line */
if (len < 16) {
gap = 16 - len;
for (i = 0; i < gap; i++) {
printf(" ");
}
}
printf(" ");
/* ascii (if printable) */
ch = payload;
for(i = 0; i < len; i++) {
if (isprint(*ch))
printf("%c", *ch);
else
printf(".");
ch++;
}
printf("\n");
return;
}
/*
* print packet payload data (avoid printing binary data)
*/
void
print_payload(const u_char *payload, int len)
{
int len_rem = len;
int line_width = 16; /* number of bytes per line */
int line_len;
int offset = 0; /* zero-based offset counter */
const u_char *ch = payload;
if (len <= 0)
return;
/* data fits on one line */
if (len <= line_width) {
print_hex_ascii_line(ch, len, offset);
return;
}
/* data spans multiple lines */
for ( ;; ) {
/* compute current line length */
line_len = line_width % len_rem;
/* print line */
print_hex_ascii_line(ch, line_len, offset);
/* compute total remaining */
len_rem = len_rem - line_len;
/* shift pointer to remaining bytes to print */
ch = ch + line_len;
/* add offset */
offset = offset + line_width;
/* check if we have line width chars or less */
if (len_rem <= line_width) {
/* print last line and get out */
print_hex_ascii_line(ch, len_rem, offset);
break;
}
}
return;
}
/*
* dissect/print packet
*/
void
got_packet(u_char *args, const struct pcap_pkthdr *header, const u_char *packet)
{
static int count = 1; /* packet counter */
/* declare pointers to packet headers */
const struct sniff_ethernet *ethernet; /* The ethernet header [1] */
const struct sniff_ip *ip; /* The IP header */
const struct sniff_tcp *tcp; /* The TCP header */
const char *payload; /* Packet payload */
int size_ip;
int size_tcp;
int size_payload;
printf("\nPacket number %d:\n", count);
count++;
/* define ethernet header */
ethernet = (struct sniff_ethernet*)(packet);
/* define/compute ip header offset */
ip = (struct sniff_ip*)(packet + SIZE_ETHERNET);
size_ip = IP_HL(ip)*4;
if (size_ip < 20) {
printf(" * Invalid IP header length: %u bytes\n", size_ip);
return;
}
/* print source and destination IP addresses */
printf(" From: %s\n", inet_ntoa(ip->ip_src));
printf(" To: %s\n", inet_ntoa(ip->ip_dst));
/* determine protocol */
switch(ip->ip_p) {
case IPPROTO_TCP:
printf(" Protocol: TCP\n");
break;
case IPPROTO_UDP:
printf(" Protocol: UDP\n");
return;
case IPPROTO_ICMP:
printf(" Protocol: ICMP\n");
return;
case IPPROTO_IP:
printf(" Protocol: IP\n");
return;
default:
printf(" Protocol: unknown\n");
return;
}
/*
* OK, this packet is TCP.
*/
/* define/compute tcp header offset */
tcp = (struct sniff_tcp*)(packet + SIZE_ETHERNET + size_ip);
size_tcp = TH_OFF(tcp)*4;
if (size_tcp < 20) {
printf(" * Invalid TCP header length: %u bytes\n", size_tcp);
return;
}
printf(" Src port: %d\n", ntohs(tcp->th_sport));
printf(" Dst port: %d\n", ntohs(tcp->th_dport));
/* define/compute tcp payload (segment) offset */
payload = (u_char *)(packet + SIZE_ETHERNET + size_ip + size_tcp);
/* compute tcp payload (segment) size */
size_payload = ntohs(ip->ip_len) - (size_ip + size_tcp);
/*
* Print payload data; it might be binary, so don't just
* treat it as a string.
*/
if (size_payload > 0) {
printf(" Payload (%d bytes):\n", size_payload);
print_payload(payload, size_payload);
}
return;
}
int main(int argc, char **argv)
{
char *dev = NULL; /* capture device name */
char errbuf[PCAP_ERRBUF_SIZE]; /* error buffer */
pcap_t *handle; /* packet capture handle */
char filter_exp[] = "ip"; /* filter expression [3] */
struct bpf_program fp; /* compiled filter program (expression) */
bpf_u_int32 mask; /* subnet mask */
bpf_u_int32 net; /* ip */
int num_packets = 10; /* number of packets to capture */
print_app_banner();
/* check for capture device name on command-line */
if (argc == 2) {
dev = argv[1];
}
else if (argc > 2) {
fprintf(stderr, "error: unrecognized command-line options\n\n");
print_app_usage();
exit(EXIT_FAILURE);
}
else {
/* find a capture device if not specified on command-line */
dev = pcap_lookupdev(errbuf);
if (dev == NULL) {
fprintf(stderr, "Couldn't find default device: %s\n",
errbuf);
exit(EXIT_FAILURE);
}
}
/* get network number and mask associated with capture device */
if (pcap_lookupnet(dev, &net, &mask, errbuf) == -1) {
fprintf(stderr, "Couldn't get netmask for device %s: %s\n",
dev, errbuf);
net = 0;
mask = 0;
}
/* print capture info */
printf("Device: %s\n", dev);
printf("Number of packets: %d\n", num_packets);
printf("Filter expression: %s\n", filter_exp);
/* open capture device */
handle = pcap_open_live(dev, SNAP_LEN, 1, 1000, errbuf);
if (handle == NULL) {
fprintf(stderr, "Couldn't open device %s: %s\n", dev, errbuf);
exit(EXIT_FAILURE);
}
/* make sure we're capturing on an Ethernet device [2] */
if (pcap_datalink(handle) != DLT_EN10MB) {
fprintf(stderr, "%s is not an Ethernet\n", dev);
exit(EXIT_FAILURE);
}
/* compile the filter expression */
if (pcap_compile(handle, &fp, filter_exp, 0, net) == -1) {
fprintf(stderr, "Couldn't parse filter %s: %s\n",
filter_exp, pcap_geterr(handle));
exit(EXIT_FAILURE);
}
/* apply the compiled filter */
if (pcap_setfilter(handle, &fp) == -1) {
fprintf(stderr, "Couldn't install filter %s: %s\n",
filter_exp, pcap_geterr(handle));
exit(EXIT_FAILURE);
}
/* now we can set our callback function */
pcap_loop(handle, num_packets, got_packet, NULL);
/* cleanup */
pcap_freecode(&fp);
pcap_close(handle);
printf("\nCapture complete.\n");
return 0;
}
我正在按照以下步骤操作，但只得到一个数据包，我想写每个数据包的行
I was following this steps but just get for one packet, I want to write rows for every packet
typedef struct CsvRow
{
char ipLocal[32];
char ipRemote[32];
...
struct csvRow* next;
} Csvrow;
CsvRow* first;
CsvRow* last;
// collecting
CsvRow* newLine = malloc(sizeof(CsvRow));
newLine->next = NULL;
if (last == NULL)
{
first = last = newLine;
}
else
{
last->next = newLine;
}
// then when you are gathering information just add that in last
strcpy(last->ipLocal, "someip");
..
// at the end of your main function do
FILE* fp = fopen("test.csv", "w");
if (fp == NULL)
{
fprintf(stderr, "file access denied");
abort();
}
for (CsvRow* p = first; p != NULL; p = p->next)
{
fprintf(fp, "%s,%s\n", p->ipLocal, p->ipRemote);
}
fclose(fp);
// free memory
CsvRow* q = first;
while (q != NULL)
{
CsvRow* next = q->next;
free(q);
q = next;
}
推荐答案
got_packet 是一个回调，因此每次调用该函数时，您都应创建一个新的 CsvRow 结构并将其添加到您的列表中，在got_packet填充中结构。然后在程序末尾（返回0之前），打开文件并以第一个
the got_packet is a callback so every time that function is called you should create a new CsvRow struct and add it to your list, inside of got_packet fill the struct. then at program end (before return 0), open the file and write your list starting with first
eg
typedef struct {
char from[32];
char to[32];
.. and whatever else you want to put in
} CsvRow;
CsvRow* first = NULL;
CsvRow* last = NULL;
void got_packet( .. )
{
CsvRow* newLine = malloc(sizeof(CsvRow));
newLine->next = NULL;
if (last == NULL)
{
first = last = newLine;
}
else
{
last->next = newLine;
last = newLine; // new last
}
strcpy(last->from, inet_ntoa(ip->ip_src));
strcpy(last->to, inet_ntoa(ip->ip_dst));
... and fill in whatever else you want to store
}
然后在main（）末尾
then at the end of main()
FILE *fp = fopen("yourfile","w");
for (CsvRow* p = first; p != NULL; p=p->next)
{
fprintf(fp,"%s,%s", p->from, p->to );
}
fclose(fp);
这篇关于如何在文件CSV中写入许多行？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
