React Native无法找到匹配的项目配置(仅限构建) [英] React Native Unable to find a matching configuration of project (Build only)
本文介绍了React Native无法找到匹配的项目配置(仅限构建)的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
当运行react-native run-android或cd android && ./gradlew assembleDebug时，我的react native版本可以正常工作.但是对于运行./gradlew assembleRelease
My react native build works fine when running react-native run-android or cd android && ./gradlew assembleDebug. But I'll get the following for all every react native package I have installed when running ./gradlew assembleRelease
> Could not resolve project :react-native-fbsdk.
Required by:
project :app
> Unable to find a matching configuration of project :react-native-fbsdk:
- Configuration 'debugApiElements':
- Required com.android.build.api.attributes.BuildTypeAttr 'releaseStaging' and found incompatible value 'debug'.
- Required com.android.build.gradle.internal.dependency.AndroidTypeAttr 'Aar' and found compatible value 'Aar'.
- Found com.android.build.gradle.internal.dependency.VariantAttr 'debug' but wasn't required.
- Required org.gradle.api.attributes.Usage 'java-runtime' and found incompatible value 'java-api'.
- Configuration 'debugRuntimeElements':
- Required com.android.build.api.attributes.BuildTypeAttr 'releaseStaging' and found incompatible value 'debug'.
- Required com.android.build.gradle.internal.dependency.AndroidTypeAttr 'Aar' and found compatible value 'Aar'.
- Found com.android.build.gradle.internal.dependency.VariantAttr 'debug' but wasn't required.
- Required org.gradle.api.attributes.Usage 'java-runtime' and found compatible value 'java-runtime'.
- Configuration 'releaseApiElements':
- Required com.android.build.api.attributes.BuildTypeAttr 'releaseStaging' and found incompatible value 'release'.
- Required com.android.build.gradle.internal.dependency.AndroidTypeAttr 'Aar' and found compatible value 'Aar'.
- Found com.android.build.gradle.internal.dependency.VariantAttr 'release' but wasn't required.
- Required org.gradle.api.attributes.Usage 'java-runtime' and found incompatible value 'java-api'.
- Configuration 'releaseRuntimeElements':
- Required com.android.build.api.attributes.BuildTypeAttr 'releaseStaging' and found incompatible value 'release'.
- Required com.android.build.gradle.internal.dependency.AndroidTypeAttr 'Aar' and found compatible value 'Aar'.
- Found com.android.build.gradle.internal.dependency.VariantAttr 'release' but wasn't required.
- Required org.gradle.api.attributes.Usage 'java-runtime' and found compatible value 'java-runtime'.
通过运行./gradlew assembleRelease --info获得更多详细信息后，我发现此消息是为我所有有问题的软件包打印的:
Upon getting more details by running ./gradlew assembleRelease --info I found that this message is printed for all of my problematic packages:
file or directory '/path/to/my/project/node_modules/react-native-fcm/android/libs', not found
在此文件夹中，没有"libs"文件夹，并且settings.gradle不会告诉它指向"libs"文件夹.
Looking in this folder, there is no "libs" folder, and settings.gradle does not tell it to point to a "libs" folder.
include ':react-native-fcm'
project(':react-native-fcm').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-fcm/android')
是否应该生成该文件夹?我的app/build.gradle中确实有compile fileTree(dir: "libs", include: ["*.jar"]).
Should something be generating this folder? I do have compile fileTree(dir: "libs", include: ["*.jar"]) in my app/build.gradle.
一些重要文件供参考:
build.gradle
build.gradle
// Top-level build file where you can add configuration options common to all sub-projects/modules.
buildscript {
repositories {
jcenter()
google()
}
dependencies {
classpath 'com.android.tools.build:gradle:3.0.0'
classpath 'com.google.gms:google-services:3.1.1'
// NOTE: Do not place your application dependencies here; they belong
// in the individual module build.gradle files
}
}
allprojects {
repositories {
mavenLocal()
jcenter()
configurations.all {
resolutionStrategy {
force 'com.facebook.android:facebook-android-sdk:4.28.0'
}
}
maven {
url "https://maven.google.com"
}
maven {
url "https://jitpack.io"
}
maven {
// All of React Native (JS, Obj-C sources, Android binaries) is installed from npm
url "$rootDir/../node_modules/react-native/android"
}
google()
}
}
app/build.gradle
app/build.gradle
apply plugin: "com.android.application"
import com.android.build.OutputFile
/**
* The react.gradle file registers a task for each build variant (e.g. bundleDebugJsAndAssets
* and bundleReleaseJsAndAssets).
* These basically call `react-native bundle` with the correct arguments during the Android build
* cycle. By default, bundleDebugJsAndAssets is skipped, as in debug/dev mode we prefer to load the
* bundle directly from the development server. Below you can see all the possible configurations
* and their defaults. If you decide to add a configuration block, make sure to add it before the
* `apply from: "../../node_modules/react-native/react.gradle"` line.
*
* project.ext.react = [
* // the name of the generated asset file containing your JS bundle
* bundleAssetName: "index.android.bundle",
*
* // the entry file for bundle generation
* entryFile: "index.android.js",
*
* // whether to bundle JS and assets in debug mode
* bundleInDebug: false,
*
* // whether to bundle JS and assets in release mode
* bundleInRelease: true,
*
* // whether to bundle JS and assets in another build variant (if configured).
* // See http://tools.android.com/tech-docs/new-build-system/user-guide#TOC-Build-Variants
* // The configuration property can be in the following formats
* // 'bundleIn${productFlavor}${buildType}'
* // 'bundleIn${buildType}'
* // bundleInFreeDebug: true,
* // bundleInPaidRelease: true,
* // bundleInBeta: true,
*
* // whether to disable dev mode in custom build variants (by default only disabled in release)
* // for example: to disable dev mode in the staging build type (if configured)
* devDisabledInStaging: true,
* // The configuration property can be in the following formats
* // 'devDisabledIn${productFlavor}${buildType}'
* // 'devDisabledIn${buildType}'
*
* // the root of your project, i.e. where "package.json" lives
* root: "../../",
*
* // where to put the JS bundle asset in debug mode
* jsBundleDirDebug: "$buildDir/intermediates/assets/debug",
*
* // where to put the JS bundle asset in release mode
* jsBundleDirRelease: "$buildDir/intermediates/assets/release",
*
* // where to put drawable resources / React Native assets, e.g. the ones you use via
* // require('./image.png')), in debug mode
* resourcesDirDebug: "$buildDir/intermediates/res/merged/debug",
*
* // where to put drawable resources / React Native assets, e.g. the ones you use via
* // require('./image.png')), in release mode
* resourcesDirRelease: "$buildDir/intermediates/res/merged/release",
*
* // by default the gradle tasks are skipped if none of the JS files or assets change; this means
* // that we don't look at files in android/ or ios/ to determine whether the tasks are up to
* // date; if you have any other folders that you want to ignore for performance reasons (gradle
* // indexes the entire tree), add them here. Alternatively, if you have JS files in android/
* // for example, you might want to remove it from here.
* inputExcludes: ["android/**", "ios/**"],
*
* // override which node gets called and with what additional arguments
* nodeExecutableAndArgs: ["node"],
*
* // supply additional arguments to the packager
* extraPackagerArgs: []
* ]
*/
project.ext.react = [
entryFile: "index.js"
]
apply from: "../../node_modules/react-native/react.gradle"
apply from: "../../node_modules/react-native-code-push/android/codepush.gradle"
/**
* Set this to true to create two separate APKs instead of one:
* - An APK that only works on ARM devices
* - An APK that only works on x86 devices
* The advantage is the size of the APK is reduced by about 4MB.
* Upload all the APKs to the Play Store and people will download
* the correct one based on the CPU architecture of their device.
*/
def enableSeparateBuildPerCPUArchitecture = false
/**
* Run Proguard to shrink the Java bytecode in release builds.
*/
def enableProguardInReleaseBuilds = false
android {
compileSdkVersion 26
buildToolsVersion "26.0.2"
defaultConfig {
applicationId "com.gauge"
minSdkVersion 16
targetSdkVersion 26
multiDexEnabled true
versionCode 24
versionName "1.2.9"
ndk {
abiFilters "armeabi-v7a", "x86"
}
}
signingConfigs {
release {
if (project.hasProperty('MYAPP_RELEASE_STORE_FILE')) {
storeFile file(MYAPP_RELEASE_STORE_FILE)
storePassword MYAPP_RELEASE_STORE_PASSWORD
keyAlias MYAPP_RELEASE_KEY_ALIAS
keyPassword MYAPP_RELEASE_KEY_PASSWORD
}
}
}
splits {
abi {
reset()
enable enableSeparateBuildPerCPUArchitecture
universalApk false // If true, also generate a universal APK
include "armeabi-v7a", "x86"
}
}
buildTypes {
debug {
// Note: CodePush updates should not be tested in Debug mode as they are overriden by the RN packager. However, because CodePush checks for updates in all modes, we must supply a key.
buildConfigField "String", "CODEPUSH_KEY", '""'
}
releaseStaging {
minifyEnabled enableProguardInReleaseBuilds
signingConfig signingConfigs.release
buildConfigField "String", "CODEPUSH_KEY", '"1psOppiGxP0-cJpCePhMqgEjeO4l2533309f-9929-415c-8999-d7fda42c3857"'
}
release {
minifyEnabled enableProguardInReleaseBuilds
proguardFiles getDefaultProguardFile("proguard-android.txt"), "proguard-rules.pro"
signingConfig signingConfigs.release
buildConfigField "String", "CODEPUSH_KEY", '"0wPxPhihmtxxEdma3mU4zIGIFNdi2533309f-9929-415c-8999-d7fda42c3857"'
}
}
// applicationVariants are e.g. debug, release
applicationVariants.all { variant ->
variant.outputs.each { output ->
// For each separate APK per architecture, set a unique version code as described here:
// http://tools.android.com/tech-docs/new-build-system/user-guide/apk-splits
def versionCodes = ["armeabi-v7a":1, "x86":2]
def abi = output.getFilter(OutputFile.ABI)
if (abi != null) { // null for the universal-debug, universal-release variants
output.versionCodeOverride =
versionCodes.get(abi) * 1048576 + defaultConfig.versionCode
}
}
}
}
buildscript {
repositories {
maven { url 'https://maven.fabric.io/public' }
}
dependencies {
classpath 'io.fabric.tools:gradle:1.22.1'
}
}
apply plugin: 'io.fabric'
repositories {
maven { url 'https://maven.fabric.io/public' }
}
dependencies {
compile project(':react-native-code-push')
compile (project(':react-native-code-push')) {
exclude(group: 'android.arch.core')
}
compile project(':react-native-config')
compile project(':react-native-vector-icons')
compile(project(':react-native-radar')) {
exclude group: 'com.google.android.gms'
exclude module: 'support-v4'
}
compile project(':react-native-push-notification')
compile project(':react-native-photo-view')
compile project(':react-native-linear-gradient')
compile project(':react-native-image-picker')
compile project(':react-native-fcm')
compile fileTree(dir: "libs", include: ["*.jar"])
compile(project(':react-native-fbsdk')){
exclude(group: 'com.facebook.android', module: 'facebook-android-sdk')
}
compile "com.facebook.android:facebook-android-sdk:4.22.1"
compile "com.android.support:appcompat-v7:26.0.2"
compile "com.facebook.react:react-native:+" // From node_modules
compile('com.crashlytics.sdk.android:crashlytics:2.6.7@aar') {
transitive = true
}
compile 'com.android.support:multidex:1.0.2'
compile "com.google.android.gms:play-services-location:12.0.0"
}
// Run this once to be able to run the application with BUCK
// puts all compile dependencies into folder libs for BUCK to use
task copyDownloadableDepsToLibs(type: Copy) {
from configurations.compile
into 'libs'
}
// ADD THIS AT THE BOTTOM
apply plugin: 'com.google.gms.google-services'
settings.gradle
settings.gradle
rootProject.name = 'MyProject'
include ':app'
include ':react-native-vector-icons'
project(':react-native-vector-icons').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-vector-icons/android')
include ':react-native-radar'
project(':react-native-radar').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-radar/android')
include ':react-native-push-notification'
project(':react-native-push-notification').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-push-notification/android')
include ':react-native-photo-view'
project(':react-native-photo-view').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-photo-view/android')
include ':react-native-linear-gradient'
project(':react-native-linear-gradient').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-linear-gradient/android')
include ':react-native-image-picker'
project(':react-native-image-picker').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-image-picker/android')
include ':react-native-fcm'
project(':react-native-fcm').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-fcm/android')
include ':react-native-code-push'
project(':react-native-code-push').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-code-push/android/app')
include ':react-native-intercom'
project(':react-native-intercom').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-intercom/android')
include ':react-native-video'
project(':react-native-video').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-video/android')
include ':react-native-fbsdk'
project(':react-native-fbsdk').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-fbsdk/android')
include ':react-native-config'
project(':react-native-config').projectDir = new File(rootProject.projectDir, '../node_modules/react-native-config/android')
更新:我使用react-native init创建了一个干净的项目并运行了构建，并且创建了相同的问题，所以我猜这是我的环境所特有的，或者依赖项存在某种临时性问题.
Update: I created a clean project with react-native init and ran the build and it created the same problem, so I guess it's something specific to my environment or there is some kind of temporary problem with the dependencies.
更新:在Windows计算机上构建了所有内容.同样的问题.
Update: Built everything on a Windows machine. Same problem.
更新:我已经能够获得该版本的某些版本，但不能获得主要项目.可能是由于以下警告:
Update: I have been able to get certain versions of this working, but not the main project. It might be due to these warnings:
Configuration 'compile' in project ':react-native-code-push' is deprecated. Use 'implementation' instead.
WARNING: The specified Android SDK Build Tools version (23.0.1) is ignored, as it is below the minimum supported version (26.0.2) for Android Gradle Plugin 3.0.1.
Android SDK Build Tools 26.0.2 will be used.
To suppress this warning, remove "buildToolsVersion '23.0.1'" from your build.gradle file, as each version of the Android Gradle Plugin now has a default version of the build tools.
推荐答案
升级Gradle并将matchingFallbacks添加到您的非标准构建类型.
您的库不知道要匹配的构建类型.
Upgrade Gradle and add matchingFallbacks to your non-standard build type.
Your libraries do not know what build type to match.
例如.
buildType {
...
mySpecialRelease {
...
matchingFallbacks = ['release', 'debug']
}
}
这篇关于React Native无法找到匹配的项目配置(仅限构建)的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
