APC和儿童PID XXXXX退出信号分段故障 [英] APC and child pid XXXXX exit signal Segmentation fault

查看:339
本文介绍了APC和儿童PID XXXXX退出信号分段故障的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

首先,我已经在服务器上安装了XCache,我不得不对了XCache很多我的服务器,但在这其中几天后,你去什么,除了在Apache的错误日志中的错误一个空白页:

First I had xCache installed on server, I had xCache on lot of my servers but in this one after couple of days you go nothing except a blank page with this error in apache error log:

 child pid XXXXX exit signal Segmentation fault

据我所知,这是否意味着某种内存损坏。

As far as I know this mean some sort of memory corruption.

所以,我从php.ini文件中删除了XCache并安装APC。但是现在更糟。 1小时,或者更少的后/多个服务器停止响应。我可以在我的网站的服务器状态清楚地看到,有很多黑白模式连接。和他们没有任何共同的东西。其中一些是从的Joomla(第一页),以及一些来自vBulletin(论坛)和其他一些是关于其他自定义codeS。
如果我让它有更多的时间,我将要在Apache的错误日志中这个错误:

So I removed xCache from php.ini and installed APC. But things are worse now. After one hour or less/more server become unresponsive. I can clearly see in my website's server-status that there are lot of connections in W mode. And they dont have any thing in common. Some of them are from Joomla (first page) and some from vBulletin (forums) and some other are about other custom codes. If I let it for more time I will going to have this error in Apache error log:

 Server reached MaxClients setting, consider raising the MaxClients setting

Apache是​​在mod_php,并且和mod_ruid2模式。

Apache is in mod_php and mod_ruid2 mode.

下面是服务器状态的结果时忌用:

Here is result of server-status when hanged:

Server uptime: 52 minutes 57 seconds
Total accesses: 31025 - Total Traffic: 279.0 MB
CPU Usage: u418.14 s64.28 cu0 cs0 - 15.2% CPU load
9.77 requests/sec - 89.9 kB/second - 9.2 kB/request
398 requests currently being processed, 27 idle workers

WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WWWWWWWWWWWWWWWWWWWWWWWWW.......................................
WW___WW_WW_W_WWW__WWWW_W_.......................................
_W___W___WW_W_W_W_W______.......................................

下面是错误日志的XCache将(大量的这些行):

Here is error log for xCache (lot of these lines):

[Thu Mar 28 09:50:38 2013] [notice] child pid 1607 exit signal Aborted (6)
httpd: /usr/src/xcache-2.0.0/utils.c:589: xc_sandbox_error_cb: Assertion `sandbox != ((void *)0)' failed.
[Thu Mar 28 09:51:57 2013] [notice] child pid 1643 exit signal Aborted (6)
httpd: /usr/src/xcache-2.0.0/utils.c:589: xc_sandbox_error_cb: Assertion `sandbox != ((void *)0)' failed.
[Thu Mar 28 09:52:32 2013] [notice] child pid 1724 exit signal Aborted (6)
httpd: /usr/src/xcache-2.0.0/utils.c:589: xc_sandbox_error_cb: Assertion `sandbox != ((void *)0)' failed.
[Thu Mar 28 09:55:21 2013] [notice] child pid 1672 exit signal Aborted (6)
httpd: /usr/src/xcache-2.0.0/utils.c:589: xc_sandbox_error_cb: Assertion `sandbox != ((void *)0)' failed.
[Thu Mar 28 09:55:56 2013] [notice] child pid 1471 exit signal Aborted (6)
httpd: /usr/src/xcache-2.0.0/utils.c:589: xc_sandbox_error_cb: Assertion `sandbox != ((void *)0)' failed.
[Thu Mar 28 09:56:49 2013] [notice] child pid 1753 exit signal Aborted (6)
[Thu Mar 28 09:58:29 2013] [notice] child pid 1810 exit signal Segmentation fault (11)
[Thu Mar 28 09:58:29 2013] [notice] child pid 1877 exit signal Segmentation fault (11)
httpd: /usr/src/xcache-2.0.0/utils.c:589: xc_sandbox_error_cb: Assertion `sandbox != ((void *)0)' failed.
[Thu Mar 28 10:01:34 2013] [notice] child pid 1844 exit signal Segmentation fault (11)
[Thu Mar 28 10:01:34 2013] [notice] child pid 1913 exit signal Aborted (6)
[Thu Mar 28 10:01:34 2013] [notice] child pid 1941 exit signal Segmentation fault (11)
[Thu Mar 28 10:01:36 2013] [notice] child pid 2007 exit signal Segmentation fault (11)
[Thu Mar 28 10:01:37 2013] [notice] child pid 2035 exit signal Segmentation fault (11)
[Thu Mar 28 10:01:37 2013] [notice] child pid 2036 exit signal Segmentation fault (11)

错误日志中的APC达到最大客户端之前(从一个启动到其它重启):

Error log for APC before reaching max client (from one restart to other restart):

[Thu Mar 28 19:17:10 2013] [notice] Apache/2.2.24 (Unix) mod_ssl/2.2.24 OpenSSL/1.0.0-fips DAV/2 PHP/5.2.17 configured -- resuming normal operations
[Thu Mar 28 19:21:40 2013] [notice] child pid 1356 exit signal Segmentation fault (11)
[Thu Mar 28 19:22:41 2013] [notice] child pid 1520 exit signal Segmentation fault (11)
[Thu Mar 28 19:22:42 2013] [notice] child pid 1330 exit signal Segmentation fault (11)
[Thu Mar 28 19:22:42 2013] [notice] child pid 1518 exit signal Segmentation fault (11)
[Thu Mar 28 19:22:46 2013] [notice] child pid 1967 exit signal Segmentation fault (11)
[Thu Mar 28 19:22:46 2013] [notice] child pid 1968 exit signal Segmentation fault (11)
[Thu Mar 28 19:22:49 2013] [notice] child pid 1939 exit signal Segmentation fault (11)
[Thu Mar 28 19:22:50 2013] [notice] child pid 2034 exit signal Segmentation fault (11)
[Thu Mar 28 19:22:51 2013] [notice] child pid 2062 exit signal Segmentation fault (11)
[Thu Mar 28 19:22:57 2013] [notice] child pid 2091 exit signal Segmentation fault (11)
[Thu Mar 28 19:22:58 2013] [notice] child pid 2090 exit signal Segmentation fault (11)
[Thu Mar 28 19:25:34 2013] [notice] caught SIGTERM, shutting down
[Thu Mar 28 19:25:37 2013] [notice] SSL FIPS mode disabled
[Thu Mar 28 19:25:37 2013] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
[Thu Mar 28 19:25:37 2013] [warn] Init: Name-based SSL virtual hosts only work for clients with TLS server name indication support (RFC 4366)
[Thu Mar 28 19:25:37 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Mar 28 19:25:38 2013] [notice] SSL FIPS mode disabled
[Thu Mar 28 19:25:38 2013] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
[Thu Mar 28 19:25:38 2013] [warn] Init: Name-based SSL virtual hosts only work for clients with TLS server name indication support (RFC 4366)
[Thu Mar 28 19:25:38 2013] [notice] Apache/2.2.24 (Unix) mod_ssl/2.2.24 OpenSSL/1.0.0-fips DAV/2 PHP/5.2.17 configured -- resuming normal operations

从PHP信息小:

Little from PHP Info:

System  Linux xxx.xxxxx.com 2.6.32-358.0.1.el6.x86_64 #1 SMP Wed Feb 27 06:06:45 UTC 2013 x86_64
Build Date  Mar 17 2013 12:55:14
Configure Command   './configure' '--with-apxs2' '--with-curl=/usr/local/lib' '--with-gd' '--with-ttf' '--with-gettext' '--with-jpeg-dir=/usr/local/lib' '--with-freetype-dir=/usr/local/lib' '--with-kerberos' '--with-openssl' '--with-mcrypt' '--with-mhash' '--with-mysql=/usr' '--with-mysqli=/usr/bin/mysql_config' '--with-pdo-mysql=/usr' '--with-pcre-regex=/usr/local' '--with-pear' '--with-png-dir=/usr/local/lib' '--with-xsl' '--with-zlib' '--with-zlib-dir=/usr/local/lib' '--with-iconv=/usr/local' '--enable-bcmath' '--enable-calendar' '--enable-exif' '--enable-ftp' '--enable-gd-native-ttf' '--enable-magic-quotes' '--enable-safe-mode' '--enable-soap' '--enable-sockets' '--enable-mbstring' '--enable-zip' '--enable-wddx'
Server API  Apache 2.0 Handler
Virtual Directory Support   enabled
Configuration File (php.ini) Path   /usr/local/lib
Loaded Configuration File   /usr/local/lib/php.ini
Scan this dir for additional .ini files     (none)
additional .ini files parsed    (none)
PHP API     20041225
PHP Extension   20060613
Zend Extension  220060519
Debug Build     no
Thread Safety   enabled
Zend Memory Manager     enabled
IPv6 Support    enabled
Registered PHP Streams  https, ftps, compress.zlib, php, file, data, http, ftp, zip
Registered Stream Socket Transports     tcp, udp, unix, udg, ssl, sslv3, sslv2, tls
Registered Stream Filters   zlib.*, convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed 

APC设置:

enabled
Version     3.1.13
APC Debugging   Disabled
MMAP Support    Enabled
MMAP File Mask  no value
Locking type    pthread read/write Locks
Serialization Support   php
Revision    $Revision: 327136 $
Build Date  Mar 28 2013 12:40:18

腓-v:

PHP 5.2.17 (cli) (built: Mar 17 2013 12:55:24) 
Copyright (c) 1997-2010 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2010 Zend Technologies

的httpd -V:

httpd -V:

Server version: Apache/2.2.24 (Unix)
Server built:   Mar 10 2013 09:18:00
Server's Module Magic Number: 20051115:31
Server loaded:  APR 1.4.6, APR-Util 1.4.1
Compiled using: APR 1.4.6, APR-Util 1.4.1
Architecture:   64-bit
Server MPM:     Worker
  threaded:     yes (fixed thread count)
    forked:     yes (variable process count)
Server compiled with....
 -D APACHE_MPM_DIR="server/mpm/worker"
 -D APR_HAS_SENDFILE
 -D APR_HAS_MMAP
 -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
 -D APR_USE_SYSVSEM_SERIALIZE
 -D APR_USE_PTHREAD_SERIALIZE
 -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
 -D APR_HAS_OTHER_CHILD
 -D AP_HAVE_RELIABLE_PIPED_LOGS
 -D DYNAMIC_MODULE_LIMIT=128
 -D HTTPD_ROOT="/etc/httpd"
 -D SUEXEC_BIN="/usr/sbin/suexec"
 -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
 -D DEFAULT_ERRORLOG="logs/error_log"
 -D AP_TYPES_CONFIG_FILE="conf/mime.types"
 -D SERVER_CONFIG_FILE="conf/httpd.conf"

任何想法?我将奖励50:)

Any Idea?! I will reward 50 :)

推荐答案

从服务器状态页的样子,你想运行PHP与螺纹的Apache MPM mod_php的。许多PHP扩展,可能包括APC和XCache将,是不是线程安全的。因此,它们经常会崩溃负载下

From the looks of your server status page, you are trying to run PHP as mod_php with a threaded Apache MPM. Many PHP extensions, likely including APC and Xcache, are not thread-safe. As such, they will crash frequently under load.

您需要到Apache切换到prefork MPM,或运行PHP作为CGI或FastCGI的。

You will need to switch Apache to the prefork MPM, or run PHP as CGI or FastCGI.

这篇关于APC和儿童PID XXXXX退出信号分段故障的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!

查看全文
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆