VMWare VMDK到Windows驱动器号的映射 [英] VMWare VMDK mapping to Windows Drive Letters
本文介绍了VMWare VMDK到Windows驱动器号的映射的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
此代码几乎可以运行，它将VWare VMDK映射到Windows驱动器.该代码不是我的.
this code almost works, it maps VWare VMDK to windows drives. The code is not mine.
在其他信息中，它将返回"用于虚拟机主的DD-SERV-01_15.vmdk 是驱动器号 G:"
Among other info it will return "DD-SERV-01_15.vmdk for VM MAIN is Drive letter G:"
该脚本将提示输入凭据并继续进行映射，但是出了点问题，只有最后一个VM/驱动器被保存为输出-我希望有人可以看看并更新/修复代码，以便保存所有输出请吗?
The script will prompt for credentials and proceeds to map however something goes wrong and only the last VM / Drive is is saved as output - I was hoping someone could take a look and update / fix the code so that it saves all output please?
谢谢.
#Get VMware Disk Usage
# Created by Hugo Peeters
# http://www.peetersonline.nl
# VARIABLES
$Decimals = 1
$VCServer = "SERVERNAME"
# SCRIPT
# Connect to VC
Write-Progress "Gathering Information" "Connecting to Virtual Center" -Id 0
$VC = Connect-VIServer $VCServer
# Create Output Collection
$myCol = @()
# List Datastores (Datastore Name)
Write-Progress "Gathering Information" "Listing Datastores" -Id 0
$Datastores = Get-Datastore | Sort Name
# List vms
Write-Progress "Gathering Information" "Listing VMs and Disk Files" -Id 0
$VMSummaries = @()
ForEach ($vm in (Get-VM))
{
$VMView = $VM | Get-View
ForEach ($VirtualSCSIController in ($VMView.Config.Hardware.Device | Where {$_.DeviceInfo.Label -match "SCSI Controller"}))
{
ForEach ($VirtualDiskDevice in ($VMView.Config.Hardware.Device | Where {$_.ControllerKey -eq $VirtualSCSIController.Key}))
{
$VMSummary = "" | Select VM, HostName, PowerState, DiskFile, DiskName, DiskSize, SCSIController, SCSITarget
$VMSummary.VM = $VM.Name
$VMSummary.HostName = $VMView.Guest.HostName
$VMSummary.PowerState = $VM.PowerState
$VMSummary.DiskFile = $VirtualDiskDevice.Backing.FileName
$VMSummary.DiskName = $VirtualDiskDevice.DeviceInfo.Label
$VMSummary.DiskSize = $VirtualDiskDevice.CapacityInKB * 1KB
$VMSummary.SCSIController = $VirtualSCSIController.BusNumber
$VMSummary.SCSITarget = $VirtualDiskDevice.UnitNumber
$VMSummaries += $VMSummary
}
}
Clear-Variable VMView -ErrorAction SilentlyContinue
}
# Loop through Datastores
ForEach ($Datastore in $Datastores)
{
# List vmdk files in datastore (vmdk Name)
Write-Progress "Gathering Information" ("Processing Datastore {0}" -f $Datastore.Name) -Id 0
$DSView = $Datastore | Get-View
$fileQueryFlags = New-Object VMware.Vim.FileQueryFlags
$fileQueryFlags.FileSize = $true
$fileQueryFlags.FileType = $true
$fileQueryFlags.Modification = $true
$searchSpec = New-Object VMware.Vim.HostDatastoreBrowserSearchSpec
$searchSpec.details = $fileQueryFlags
$searchSpec.sortFoldersFirst = $true
$dsBrowser = Get-View $DSView.browser
$rootPath = "["+$DSView.summary.Name+"]"
$searchResult = $dsBrowser.SearchDatastoreSubFolders($rootPath, $searchSpec)
ForEach ($result in $searchResult)
{
ForEach ($vmdk in ($result.File | ?{$_.Path -like "*.vmdk"} | Sort Path))
{
Write-Progress "Gathering Information" ("Processing VMDK {0}" -f $vmdk.Path) -Id 1
Write-Host "=============================================================================="
# Find vm using the vmdk (VM Name)
$VMRef = ($VMSummaries | ?{$_.DiskFile -match $Datastore.Name -and $_.DiskFile -match $vmdk.Path})
"VMDK {0} belongs to VM {1}" -f $vmdk.Path, $VMRef.VM
If ($VMRef.Powerstate -eq "PoweredOn")
{
Write-Host "VM is powered on" -ForegroundColor "yellow"
$Partitions = Get-WmiObject -Class Win32_DiskPartition -ComputerName $VMRef.HostName
If ($?)
{
$Disks = Get-WmiObject -Class Win32_DiskDrive -ComputerName $VMRef.HostName
$LogicalDisks = Get-WmiObject -Class Win32_LogicalDisk -ComputerName $VMRef.HostName
$DiskToPartition = Get-WmiObject -Class Win32_DiskDriveToDiskPartition -ComputerName $VMRef.HostName
$LogicalDiskToPartition = Get-WmiObject -Class Win32_LogicalDiskToPartition -ComputerName $VMRef.HostName
Write-Host "Read partition and disk information" -ForegroundColor "yellow"
# Match disk based on SCSI ID's
$DiskMatch = $Disks | ?{($_.SCSIPort - 1) -eq $VMRef.SCSIController -and $_.SCSITargetID -eq $VMRef.SCSITarget}
If ($DiskMatch -eq $null){Write-Warning "NO MATCHES!"}
Else
{
Write-Host "Found match:" -ForegroundColor "yellow"
$DiskMatch
# Find the Partition(s) on this disk
$PartitionsOnDisk = ($DiskToPartition | ?{$_.Antecedent -eq $DiskMatch.__PATH})
If ($PartitionsOnDisk -eq $null){Write-Warning "NO PARTITIONS!"}
Else
{
ForEach ($PartitionOnDisk in $PartitionsOnDisk)
{
Write-Host "Disk contains partition" -ForegroundColor "yellow"
$PartitionOnDisk.Dependent
$PartitionMatches = $Partitions | ?{$_.__PATH -eq $PartitionOnDisk.Dependent}
ForEach ($PartitionMatch in $PartitionMatches)
{
$LogicalDiskRefs = $LogicalDiskToPartition | ?{$_.Antecedent -eq $PartitionMatch.__PATH}
If ($LogicalDiskRefs -eq $null)
{
Write-Warning "NO LOGICAL DISKS!"
}
Else
{
ForEach ($LogicalDiskRef in $LogicalDiskRefs)
{
$LogicalDiskMatches = $LogicalDisks | ?{$_.__PATH -eq $LogicalDiskRef.Dependent}
ForEach ($LogicalDiskMatch in $LogicalDiskMatches)
{
Write-Host "Matching Logical Disk:" -ForegroundColor "yellow"
$LogicalDiskMatch
# Create Output Object
$myObj = "" | Select Datastore, DSSizeGB, DSFreeGB, DSPercentFree, DiskFile, VM, HardDisk, DriveLetter, DiskSizeGB, DiskFreeGB, PercFree
# List datastore name
$myObj.Datastore = $Datastore.Name
# Determine datastore size in GB
$myObj.DSSizeGB = [Math]::Round(($Datastore.CapacityMB * 1MB / 1GB),$Decimals)
$myObj.DSFreeGB = [Math]::Round(($Datastore.FreeSpaceMB * 1MB / 1GB),$Decimals)
# Determine datastore free space (DS%Free)
$myObj.DSPercentFree = [Math]::Round((100*($Datastore.FreeSpaceMB/$Datastore.CapacityMB)),$Decimals)
# List disk file name
$myObj.DiskFile = $vmdk.Path
# List VM Name
$myObj.VM = $VMRef.VM
# Determine virtual hard disk / logical drive
$myObj.HardDisk = $VMRef.DiskName
# Report driveletter
$myObj.DriveLetter = $LogicalDiskMatch.DeviceID
# Report Size
$myObj.DiskSizeGB = [Math]::Round(($LogicalDiskMatch.Size / 1GB),$Decimals)
# Report Free Space
$myObj.DiskFreeGB = [Math]::Round(($LogicalDiskMatch.FreeSpace / 1GB),$Decimals)
# Calculate Percentage free space
$myObj.PercFree = [Math]::Round((100 * ([int]($LogicalDiskMatch.FreeSpace / 1MB) / [int]($LogicalDiskMatch.Size / 1MB))),$Decimals)
Write-Host "RESULT:" -ForegroundColor "yellow"
$myObj
# Add output object to output collection
$myCol += $myObj
}
Clear-Variable LogicalDiskMatches -ErrorAction SilentlyContinue
}
}
Clear-Variable LogicalDiskRefs -ErrorAction SilentlyContinue
}
Clear-Variable PartitionMatches -ErrorAction SilentlyContinue
}
}
Clear-Variable PartitionsOnDisk -ErrorAction SilentlyContinue
}
Clear-Variable DiskMatch -ErrorAction SilentlyContinue
Clear-Variable Disks -ErrorAction SilentlyContinue
Clear-Variable LogicalDisks -ErrorAction SilentlyContinue
Clear-Variable DiskToPartition -ErrorAction SilentlyContinue
Clear-Variable LogicalDiskToPartition -ErrorAction SilentlyContinue
}
Clear-Variable Partitions -ErrorAction SilentlyContinue
}
Else
{
Write-Host "VM is powered off" -ForegroundColor "yellow"
}
Clear-Variable VMRef -ErrorAction SilentlyContinue
Write-Progress "Gathering Information" ("Processing VMDK {0}" -f $vmdk.Path) -Id 1 -Completed
}
}
}
# Disconnect from VC
Disconnect-VIServer -Confirm:$False
# OUTPUT
Write-Host "==================================================="
Write-Host "==================================================="
$TotalDSFree = ($myCol | Select Datastore, DSFreeGB -Unique | Measure-Object DSFreeGB -Sum).Sum
$TotalDSSize = ($myCol | Select Datastore, DSSizeGB -Unique | Measure-Object DSSizeGB -Sum).Sum
$AverageDSFree = [Math]::Round(100 * ($TotalDSFree / $TotalDSSize),$Decimals)
$AverageDiskFree = [Math]::Round(100 * (($myCol | Measure-Object DiskFreeGB -Sum).Sum / ($myCol | Measure-Object DiskSizeGB -Sum).Sum),$Decimals)
Write-Host "Total DS Free: $TotalDSFree"
Write-Host "Total DS Size: $TotalDSSize"
Write-Host "Average DS Free Percentage: $AverageDSFree"
Write-Host "Average Disk Free Percentage: $AverageDiskFree"
$myCol | Export-Csv -NoTypeInformation 'C:\TEMP\VMwareDiskUsage.csv'推荐答案
尝试将 -Append 参数添加到export-csv中，以便它不会覆盖最后一个条目:
Try adding the -Append parameter to your export-csv, so it does not overwrite the last entry:
$myCol | Export-Csv -Append -NoTypeInformation 'C:\TEMP\VMwareDiskUsage.csv'
这篇关于VMWare VMDK到Windows驱动器号的映射的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
