MAC +乌诺+ AVRDUDE：stk500_recv（）：程序员没有响应 [英] Mac + Uno + avrdude: stk500_recv(): programmer is not responding

问题描述

我想上传.hex文件到Arduino的。我没有通过IDE（如闪烁的例子或任何其他）上传视频code的任何问题。港口和船上是否正确。

I'm trying to upload .hex file to Arduino. I don't have any problems with uploading code through IDE (like blink example or any other). The port and board are correct.

所以，当我尝试上传出现问题

So problem appears when I try to upload

avrdude -pm328p -carduino -P/dev/tty.usbmodemfd121 -b57600 -D -Uflash:w:grbl_v0_8c_atmega328p_16mhz_9600.hex -v -v -v -v

avrdude: Version 6.1, compiled on Mar 23 2014 at 04:42:55
     Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
     Copyright (c) 2007-2014 Joerg Wunsch

     System wide configuration file is "/usr/local/Cellar/avrdude/6.1/etc/avrdude.conf"
     User configuration file is "/Users/Mikhail/.avrduderc"
     User configuration file does not exist or is not a regular file, skipping

     Using Port                    : /dev/tty.usbmodemfd121
     Using Programmer              : arduino
     Overriding Baud Rate          : 57600
avrdude: Send: 0 [30]   [20] 
avrdude: Send: 0 [30]   [20] 
avrdude: Send: 0 [30]   [20] 
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

我试过：

• 我有4个乌诺的桌子（原件+免费版本），同样的问题。

从这里
• 我已经安装了最新的驱动程序，试着用和没有他们。


• 与AVRDUDE附带的Arduino IDE（1.0.5和夜间版本）和最新的AVRDUDE v.6.1 BREW试图安装AVRDUDE


• 不同的波特率降至9600


• 试图preSS复位后建议一样发送字节<一个href=\"http://stackoverflow.com/questions/19765037/arduino-sketch-upload-issue-avrdude-stk500-recv-programmer-is-not-respondi\">here

• I have 4 Uno's at the table (original + free versions), the same issue.
• I have installed newest drivers from here, tried with and without them.
• tried with avrdude which comes with Arduino IDE (1.0.5 and nightly builds) and newest avrdude v.6.1 brew install avrdude
• different baud rates down to 9600
• tried to press reset after bytes are sent like suggested here

推荐答案

成功地与六角solvded上传者

据为闪烁的.hex文件Arduino的为Mac OS创建的。

It is created for flashing .hex files to Arduino for Mac OS.

选项描述这里：

这篇关于MAC +乌诺+ AVRDUDE：stk500_recv（）：程序员没有响应的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！