从iBeacon显示接收BLE信号Bluno（与Arduino的BLE） [英] Receive BLE signal from iBeacon to Bluno(arduino with BLE)

问题描述

我想从iBeacon显示接收的RSSI信号和UUID到Bluno其中Arduino板有BLE。
有些问题这一点。

1. 是否有任何解决方案，以获得UUID和RSSI从BLE到BLE？
   是否可以通信的两​​个BLE装置彼此？


2. 我想一些网站针对此问题的参考。


3. 我还需要与AR.Drone的连接bluno。你能给我一些建议这个？

感谢您的帮助。

解决方案

的Bluno具有充当iBeacon显示（发射器）的能力，但它并没有接收iBeacon显示公告和传递这些到Arduino的能力。

BLE设备能够通信并能接收的UUID和的RSSI，但是这取决于装置的能力和它暴露的接口。 iOS设备，例如，公开了一个非常复杂的BLE API。该Bluno板没有。它暴露了串行端口到Arduino和地图发送/接收数据到一组BLE GATT特征。一对Bluno设备可以被配置为充当无线串行链路，或软件的计算机或移动设备上可以经由蓝牙堆栈交换阿尔杜伊诺数据

有是AT命令将返回配对设备的RSSI，但文档并不清楚这是否是可用到Arduino或仅通过USB连接到电脑。

最好的参考（如它是）用于Bluno具体地，似乎是 DFRobot维基

我怀疑你将能够直接连接到使用蓝牙低功耗从Bluno没有蓝牙LE AR.Drone的。从理论上讲，你可以另外Bluno连接到USB端口上的AR.Drone的，写软件，但它会更简单，以获得的WiFi盾的一个Arduino，并使用内置在AR.Drone的

I want to receive rssi signal and UUID from iBeacon to Bluno which the Arduino board has BLE. there are some questions for this.

1. Are there any solutions to receive UUID and rssi from BLE to BLE? Is it possible to communicate two BLE device each other?
2. I want some sites to reference for this problem.
3. I also need to connect bluno with AR.Drone. Could you give me some advices for this?

thank you for your help

解决方案

The Bluno has the ability to act as an iBeacon (transmitter), but it doesn't have the ability to receive iBeacon announcements and pass these to the Arduino.

BLE devices can communicate and can receive UUIDs and RSSIs, but it depends on the capability of the device and the interfaces it exposes. An iOS device, for example, exposes a very sophisticated BLE API. The Bluno board does not. It exposes a "serial port" to the Arduino and maps send/receive data to a set of BLE GATT characteristics. A pair of Bluno devices can be configured to act as a wireless serial link, or software on a computer or mobile device can exchange data with the Arduino via the bluetooth stack.

There is an AT command that will return the rssi of the paired device, but the documentation isn't clear as to whether this is available to the Arduino or only via the USB connection to a computer.

The best reference (such as it is) for the Bluno specifically, seems to be the DFRobot Wiki

I doubt you will be able to connect to the AR.Drone using Bluetooth Low Energy directly from a Bluno doesn't have Bluetooth LE. In theory you could connect another Bluno to the USB port on the AR.Drone and write software, but it would be simpler to get a WiFi shield for an Arduino and use the WiFi networking that is built in to the AR.Drone

这篇关于从iBeacon显示接收BLE信号Bluno（与Arduino的BLE）的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！