Arduino的无线盾无法找到IP地址 [英] Arduino wifi shield cannot find IP address

查看:338
本文介绍了Arduino的无线盾无法找到IP地址的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

我试图访问在浏览器上我的WiFi盾的IP地址,但我不断收到哎呀!谷歌浏览器无法连接到IP地址。

Hi i'm trying to access my wifi shield's ip address on the browser but I keep getting Oops! Google Chrome could not connect to "IP ADDRESS".

我做的事:

1)更新固件=htt​​p://ohmyfarads.com/2013/11/11/updating-firmware-on-arduino-wifi-shield-for-dummies/ rel=\"nofollow\">http://ohmyfarads.com/2013/11/11/updating-firmware-on-arduino-wifi-shield-for-dummies/

1.)Updated firmware on wifi shield using this link http://ohmyfarads.com/2013/11/11/updating-firmware-on-arduino-wifi-shield-for-dummies/

2)上传的Arduino从现场的WiFi WPA草图。我的连接是WPA2

2.) uploaded the wifi WPA sketch from arduino site. My connection is WPA2

3)我的Arduino IDE 1.02和1.05,但没有运气之间切换,或者

3.) I switched between arduino IDE 1.02 and 1.05 but no luck with either

4)我使用一个连接到wifi的屏蔽一个Arduino UNO板

4.) I'm using an arduino uno board that is attached to wifi shield

帮助?谢谢!

推荐答案

这可能是由不正确路由器设置造成的。事情你应该看看:

This might be caused by incorrect router setup. Things you should look at:

1.You可能必须先路由器列表添加设备的MAC地址,并将其分配给您希望有特定的IP地址。

1.You may have to first add device mac address to router list and assign it to the specific IP address you want to have.

2,第二个选项是路由器可能此设备通过DHCP给他自己的地址。

2.The second option is that router may give his own address to this device by DHCP.

请记住,你必须为你的盾牌选择不可路由的IP地址。 IP也有可能成为你的家庭地址范围。检查最简单的方法是:

Remember that you have to choose nonroutable IP address for your shield. IP also has to be in your home address range. The simplest way to check that is:

1.Manu开始

2.Launch和类型(或键入搜索)CMD

2.Launch and type (or type in search) cmd

3.In控制台输入IPCONFIG

3.In console type "ipconfig"

您的本地IP是在IPv4中.......... 192.168.x.x(最有可能)

Your local IP is in IPv4 .......... 192.168.x.x (most likely)

(在这种情况下,屏蔽层应该有这样的地址(192.168.x.y)

(in this case shield should have address like (192.168.x.y).

有关IP [看这里]更多信息[1]

For more information about IP [look here][1]

您也可以使用 Netscan 工具,以找出是否盾是在你的局域网。

You can also use Netscan tool to find out if shield is in your LAN.

我希望这会有所帮助。

这篇关于Arduino的无线盾无法找到IP地址的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!

查看全文
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆