uint32_t 未命名类型 - VSCode 与 Windows 中的 STM32 [英] uint32_t does not name a type - VSCode with STM32 in Windows
本文介绍了uint32_t 未命名类型 - VSCode 与 Windows 中的 STM32的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我目前正在为一个项目编写代码，特别是通过 STM32 Nucleo F411RE 板与传感器连接.我使用 STM32CubeMX 设置引脚/外设等，然后使用 Makefile 工具链生成代码，以便在 Visual Studio Code 中进行编程.一切都编译正常，但 IDE/Intellisense 由于某种原因没有使用 uint32_t;任何出现都是红色波浪线，错误读取 variable "uint32_t" is not a type name.
I am currently writing code for a project, specifically interfacing with sensors via an STM32 Nucleo F411RE board. I set the pins/peripherals etc. using STM32CubeMX, then generated the code with the Makefile toolchain for programming in Visual Studio Code. Everything is compiling fine, but the IDE/Intellisense for some reason doesn't pick up any use of uint32_t; any occurences are red-squiggled, with the error reading variable "uint32_t" is not a type name.
我在顶部有 #include ，uint16_t 和 uint8_t 都在同一个文件中被识别.查看那些定义会在 stdint.h 中显示它们的行，而对于 uint32_t 来说同样不起作用.我尝试了 here 建议的解决方案和 此处，两者都不起作用.
I have #include <stdint.h> at the top, and uint16_t and uint8_t are both recognized in the same file. Peeking the definition of those reveals their lines in stdint.h, while the same does not work for uint32_t. I have attempted the solutions suggested here and here, neither of which worked.
我在 Windows 上使用 C11(不是 C++，这不是我的项目的选项)，这是我的 c_cpp_properties.json 文件(为了紧凑，所有额外的定义都被剪掉了):
I am working in C11 (not c++, which isn't an option for my project) on Windows, here is my c_cpp_properties.json file (with all the extra defines cut out for compactness):
{
"configurations": [
{
"name": "Win32",
"includePath": [
"${workspaceFolder}/**"
],
"defines": [
"_DEBUG",
"UNICODE",
"_UNICODE"
],
"databaseFilename": "${workspaceFolder}/.vscode/browse.vc.db",
"windowsSdkVersion": "10.0.17763.0",
"compilerPath": "C:/Program Files (x86)/Microsoft Visual Studio/2017/Community/VC/Tools/MSVC/14.16.27023/bin/Hostx64/x64/cl.exe",
"cStandard": "c11",
"cppStandard": "c++17",
"intelliSenseMode": "clang-x64",
"compileCommands": "${workspaceFolder}/compile_commands.json"
}
],
"version": 4
}
这里是
Here is <stdint.h> - all types are clearly declared together, with no apparent condition for uint32_t:
#pragma once
#define _STDINT
#ifndef RC_INVOKED
#include <vcruntime.h>
typedef signed char int8_t;
typedef short int16_t;
typedef int int32_t;
typedef long long int64_t;
typedef unsigned char uint8_t;
typedef unsigned short uint16_t;
typedef unsigned int uint32_t;
typedef unsigned long long uint64_t;
typedef signed char int_least8_t;
typedef short int_least16_t;
typedef int int_least32_t;
typedef long long int_least64_t;
typedef unsigned char uint_least8_t;
typedef unsigned short uint_least16_t;
typedef unsigned int uint_least32_t;
typedef unsigned long long uint_least64_t;
typedef signed char int_fast8_t;
typedef int int_fast16_t;
typedef int int_fast32_t;
typedef long long int_fast64_t;
typedef unsigned char uint_fast8_t;
typedef unsigned int uint_fast16_t;
typedef unsigned int uint_fast32_t;
typedef unsigned long long uint_fast64_t;
typedef long long intmax_t;
typedef unsigned long long uintmax_t;
// These macros must exactly match those in the Windows SDK's intsafe.h.
#define INT8_MIN (-127i8 - 1)
#define INT16_MIN (-32767i16 - 1)
#define INT32_MIN (-2147483647i32 - 1)
#define INT64_MIN (-9223372036854775807i64 - 1)
#define INT8_MAX 127i8
#define INT16_MAX 32767i16
#define INT32_MAX 2147483647i32
#define INT64_MAX 9223372036854775807i64
#define UINT8_MAX 0xffui8
#define UINT16_MAX 0xffffui16
#define UINT32_MAX 0xffffffffui32
#define UINT64_MAX 0xffffffffffffffffui64
#define INT_LEAST8_MIN INT8_MIN
#define INT_LEAST16_MIN INT16_MIN
#define INT_LEAST32_MIN INT32_MIN
#define INT_LEAST64_MIN INT64_MIN
#define INT_LEAST8_MAX INT8_MAX
#define INT_LEAST16_MAX INT16_MAX
#define INT_LEAST32_MAX INT32_MAX
#define INT_LEAST64_MAX INT64_MAX
#define UINT_LEAST8_MAX UINT8_MAX
#define UINT_LEAST16_MAX UINT16_MAX
#define UINT_LEAST32_MAX UINT32_MAX
#define UINT_LEAST64_MAX UINT64_MAX
#define INT_FAST8_MIN INT8_MIN
#define INT_FAST16_MIN INT32_MIN
#define INT_FAST32_MIN INT32_MIN
#define INT_FAST64_MIN INT64_MIN
#define INT_FAST8_MAX INT8_MAX
#define INT_FAST16_MAX INT32_MAX
#define INT_FAST32_MAX INT32_MAX
#define INT_FAST64_MAX INT64_MAX
#define UINT_FAST8_MAX UINT8_MAX
#define UINT_FAST16_MAX UINT32_MAX
#define UINT_FAST32_MAX UINT32_MAX
#define UINT_FAST64_MAX UINT64_MAX
#ifdef _WIN64
#define INTPTR_MIN INT64_MIN
#define INTPTR_MAX INT64_MAX
#define UINTPTR_MAX UINT64_MAX
#else
#define INTPTR_MIN INT32_MIN
#define INTPTR_MAX INT32_MAX
#define UINTPTR_MAX UINT32_MAX
#endif
#define INTMAX_MIN INT64_MIN
#define INTMAX_MAX INT64_MAX
#define UINTMAX_MAX UINT64_MAX
#define PTRDIFF_MIN INTPTR_MIN
#define PTRDIFF_MAX INTPTR_MAX
#ifndef SIZE_MAX
#define SIZE_MAX UINTPTR_MAX
#endif
#define SIG_ATOMIC_MIN INT32_MIN
#define SIG_ATOMIC_MAX INT32_MAX
#define WCHAR_MIN 0x0000
#define WCHAR_MAX 0xffff
#define WINT_MIN 0x0000
#define WINT_MAX 0xffff
#define INT8_C(x) (x)
#define INT16_C(x) (x)
#define INT32_C(x) (x)
#define INT64_C(x) (x ## LL)
#define UINT8_C(x) (x)
#define UINT16_C(x) (x)
#define UINT32_C(x) (x ## U)
#define UINT64_C(x) (x ## ULL)
#define INTMAX_C(x) INT64_C(x)
#define UINTMAX_C(x) UINT64_C(x)
#endif // RC_INVOKED
/*
* Copyright (c) 1992-2012 by P.J. Plauger. ALL RIGHTS RESERVED.
* Consult your license regarding permissions and restrictions.
V6.00:0009 */
uint_fast16_t 和 uint_fast32_t 在我使用它们时都没有问题，这就排除了类型问题——它们都是 unsigned int，与 uint32_t 相同.
Both uint_fast16_t and uint_fast32_t have no problems when I use them, which rules out type being an issue - they are both unsigned int, the same as uint32_t.
在制作 MCVE 时，我将问题缩小到 #include-ing "stm32f4xx_hal.h" - 没有这个 #include，一个 uint32_t 声明没问题.这是一个演示问题的文件(更改包含的顺序没有区别):
While making an MCVE, I narrowed the problem down to #include-ing "stm32f4xx_hal.h" - without this #include, a uint32_t declares fine. Here is a file that demonstrates the problem (changing the order of the includes does not make a difference):
#pragma once
#include <stdint.h>
#include "stm32f4xx_hal.h"
#define MA302_READ_MASK 0x4000
#define MA302_WRITE_MASK 0x8000
#define MA302_ADDRESS_MASK 0x1F
#define MA302_READ_BLANK_VALUE 0x0000
typedef struct {
uint32_t tester; // 'variable "uint32_t" is not a type name"'
uint16_t current_raw_16; // declares fine
uint8_t current_raw_8; // declares fine
float current_angle;
} ma302gq_p_t;
uint8_t ma302_read_register(SPI_HandleTypeDef *hndlr, uint8_t address);
float ma302_get_angle(SPI_HandleTypeDef *hndlr);
float ma302_raw_to_degrees(uint8_t raw_bit_size, uint16_t raw_angle);
void ma302_init(SPI_HandleTypeDef *hndlr);
"stm32f4xx_hal.h" 是STM32CubeMX 生成的代码的一部分，本身#includes "stm32f4xx_hal_conf.h".将 #include 添加到 "stm32f4xx_hal.h" 允许 uint32_ts 在该文件中临时声明；然而，切换到上面的文件并返回到 VSCode 会导致声明出现故障，当鼠标悬停在上面时，显示
"stm32f4xx_hal.h" is part of the code generated by STM32CubeMX, and itself #includes "stm32f4xx_hal_conf.h". Adding #include <stdint.h> to "stm32f4xx_hal.h" allows uint32_ts to temporarily declare in that file; however, switching to the above file and back in VSCode causes the declaration to glitch, and when hovered over, show <error-type> uint32_t
编辑 2:这是第一个问题文件；我之前没有包含它，因为它是自动生成的."stm32f4xx_hal.h":
EDIT 2:
Here is the first problem file; I didn't include it before as it is automatically generated.
"stm32f4xx_hal.h":
/**
******************************************************************************
* @file stm32f4xx_hal.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the HAL
* module driver.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_H
#define __STM32F4xx_HAL_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_conf.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup HAL
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup HAL_Exported_Constants HAL Exported Constants
* @{
*/
/** @defgroup HAL_TICK_FREQ Tick Frequency
* @{
*/
typedef enum
{
HAL_TICK_FREQ_10HZ = 100U,
HAL_TICK_FREQ_100HZ = 10U,
HAL_TICK_FREQ_1KHZ = 1U,
HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
} HAL_TickFreqTypeDef;
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup HAL_Exported_Macros HAL Exported Macros
* @{
*/
/** @brief Freeze/Unfreeze Peripherals in Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
/** @brief Main Flash memory mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
/** @brief System Flash memory mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
}while(0);
/** @brief Embedded SRAM mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
}while(0);
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
}while(0);
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
}while(0);
/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
}while(0);
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
* @{
*/
/** @brief SYSCFG Break Lockup lock
* Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input
* @note The selected configuration is locked and can be unlocked by system reset
*/
#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
}while(0)
/**
* @}
*/
/** @defgroup PVD_Lock_Enable PVD Lock
* @{
*/
/** @brief SYSCFG Break PVD lock
* Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
* @note The selected configuration is locked and can be unlocked by system reset
*/
#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
}while(0)
/**
* @}
*/
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */
/**
* @}
*/
/** @defgroup HAL_Private_Macros HAL Private Macros
* @{
*/
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
((FREQ) == HAL_TICK_FREQ_100HZ) || \
((FREQ) == HAL_TICK_FREQ_1KHZ))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup HAL_Exported_Functions
* @{
*/
/** @addtogroup HAL_Exported_Functions_Group1
* @{
*/
/* Initialization and Configuration functions ******************************/
HAL_StatusTypeDef HAL_Init(void);
HAL_StatusTypeDef HAL_DeInit(void);
void HAL_MspInit(void);
void HAL_MspDeInit(void);
HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
/**
* @}
*/
/** @addtogroup HAL_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ************************************************/
void HAL_IncTick(void);
void HAL_Delay(uint32_t Delay);
uint32_t HAL_GetTick(void);
uint32_t HAL_GetTickPrio(void);
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
void HAL_SuspendTick(void);
void HAL_ResumeTick(void);
uint32_t HAL_GetHalVersion(void);
uint32_t HAL_GetREVID(void);
uint32_t HAL_GetDEVID(void);
void HAL_DBGMCU_EnableDBGSleepMode(void);
void HAL_DBGMCU_DisableDBGSleepMode(void);
void HAL_DBGMCU_EnableDBGStopMode(void);
void HAL_DBGMCU_DisableDBGStopMode(void);
void HAL_DBGMCU_EnableDBGStandbyMode(void);
void HAL_DBGMCU_DisableDBGStandbyMode(void);
void HAL_EnableCompensationCell(void);
void HAL_DisableCompensationCell(void);
void HAL_GetUID(uint32_t *UID);
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
void HAL_EnableMemorySwappingBank(void);
void HAL_DisableMemorySwappingBank(void);
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup HAL_Private_Variables HAL Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup HAL_Private_Constants HAL Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
STM 有一个巨大的文件网络，所有文件都 #include 相互关联，我只能在一个帖子中放入这么多.任何拥有 STM32CubeMX 和 VSCode 的人都应该能够复制这一点.
STM has a huge web of files all #include-ing each other, there's only so much I can put in one post. Anyone with STM32CubeMX and VSCode should be able to replicate this.
推荐答案
如果你没有定义你的 stdint.h 类型，stm32f4xx_hal.h 标头会弄乱你的 stdint.h 类型vscode 工作区中的 MCU.在 c_cpp_properties.json 中，确保包含:
The stm32f4xx_hal.h header will mess with your stdint.h types if you have not defined your MCU in the vscode workspace. In c_cpp_properties.json, make sure you include:
"defines": [
"STM32F411xx", // (or whatever your makefile defines)
(...)
],
这篇关于uint32_t 未命名类型 - VSCode 与 Windows 中的 STM32的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
