手臂板带来 [英] Arm Board Bring Up

问题描述

谁能告诉我在哪里可以找到有关如何启动任何臂板的信息?我正在寻找概述，因为我是 ARM 相关内容的新手.任何链接/文档都可以......如果我能寻找案例研究，这将是 gr8 的帮助

Can anybody tell me where I can find information related to How to Bringup any arm board? I am looking for an overview as I am novice in ARM related stuffs. Any link/document will do ...It will be gr8 help if i can look for a case-study

可以考虑任何基于 arm 的电路板..我正在寻找一个案例研究...简单几步??

any arm based board can be considered..I am looking for just a case study...simple in few steps??

推荐答案

每个 ARM板"都会有所不同.阅读您拥有的 ARM 芯片的数据表，其中应该有一个关于启动的部分.另外，请阅读有关您的电路板的数据表，因为它上面有闪存/引导加载程序.如果板上没有加载程序，则必须为 ARM(如果该类型支持它)设置跳线以从外部 rom 读取，或者将初始引导代码 JTAG 到其中.

Every single ARM "board" will be different. Read the datasheet for the ARM chip you have, that should have a section near the start about booting. Also, read the datasheet about your board, as it made have flash/boot loaders on there. If there are no loaders on the board, you'll have to either set the jumpers for the ARM (if that type supoprts it) to read from external rom, or JTAG the initial boot code into it.

基本上:阅读数据表.像大多数软件一样，对像 ARM 这样的设备进行编程并不是您通常的编译/运行策略，尤其是在第一阶段.

Basically: Read the datasheets. Programming a device like an ARM isn't your usual compile/run stratergy like most software, especially not in the first stage.

如果您甚至还没有电路板，请尝试使用以下电路板:http://beagleboard.org/

edit: If you don't even have a board yet, try going for this one: http://beagleboard.org/

它带有 ARM(以及一个不错的 GPU).

It has and ARM on it (as well as a decent GPU).

这篇关于手臂板带来的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！