对非阻塞套接字使用 select() [英] Using select() for non-blocking sockets
本文介绍了对非阻塞套接字使用 select()的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我正在尝试使用 select 函数在服务器和 1 个客户端(不再)之间进行非阻塞 i/o，其中通信流畅(可以随时发送，另一个将接收而无需等待发送).我找到了一个包含一些代码的教程，并尝试将其调整为我的.这就是我所拥有的 -
I am trying to use the select function to have non-blocking i/o between a server and 1 client (no more) where the communication flows nicely (can send at any time and the other will receive without waiting to send). I found a tutorial with some code and tried to adapt it to mine. This is what I have -
服务器
#define PORT "4950"
#define STDIN 0
struct sockaddr name;
void set_nonblock(int socket) {
int flags;
flags = fcntl(socket,F_GETFL,0);
assert(flags != -1);
fcntl(socket, F_SETFL, flags | O_NONBLOCK);
}
// get sockaddr, IPv4 or IPv6:
void *get_in_addr(struct sockaddr *sa) {
if (sa->sa_family == AF_INET)
return &(((struct sockaddr_in*)sa)->sin_addr);
return &(((struct sockaddr_in6*)sa)->sin6_addr);
}
int main(int agrc, char** argv) {
int status, sock, adrlen, new_sd;
struct addrinfo hints;
struct addrinfo *servinfo; //will point to the results
//store the connecting address and size
struct sockaddr_storage their_addr;
socklen_t their_addr_size;
fd_set read_flags,write_flags; // the flag sets to be used
struct timeval waitd; // the max wait time for an event
int sel; // holds return value for select();
//socket infoS
memset(&hints, 0, sizeof hints); //make sure the struct is empty
hints.ai_family = AF_INET;
hints.ai_socktype = SOCK_STREAM; //tcp
hints.ai_flags = AI_PASSIVE; //use local-host address
//get server info, put into servinfo
if ((status = getaddrinfo("127.0.0.1", PORT, &hints, &servinfo)) != 0) {
fprintf(stderr, "getaddrinfo error: %s
", gai_strerror(status));
exit(1);
}
//make socket
sock = socket(servinfo->ai_family, servinfo->ai_socktype, servinfo->ai_protocol);
if (sock < 0) {
printf("
server socket failure %m", errno);
exit(1);
}
//allow reuse of port
int yes=1;
if (setsockopt(sock,SOL_SOCKET,SO_REUSEADDR,&yes,sizeof(int)) == -1) {
perror("setsockopt");
exit(1);
}
//unlink and bind
unlink("127.0.0.1");
if(bind (sock, servinfo->ai_addr, servinfo->ai_addrlen) < 0) {
printf("
Bind error %m", errno);
exit(1);
}
freeaddrinfo(servinfo);
//listen
if(listen(sock, 5) < 0) {
printf("
Listen error %m", errno);
exit(1);
}
their_addr_size = sizeof(their_addr);
//accept
new_sd = accept(sock, (struct sockaddr*)&their_addr, &their_addr_size);
if( new_sd < 0) {
printf("
Accept error %m", errno);
exit(1);
}
set_nonblock(new_sd);
cout<<"
Successful Connection!";
char* in = new char[255];
char* out = new char[255];
int numSent;
int numRead;
while(1) {
waitd.tv_sec = 10;
FD_ZERO(&read_flags);
FD_ZERO(&write_flags);
FD_SET(new_sd, &read_flags);
if(strlen(out) != 0)
FD_SET(new_sd, &write_flags);
sel = select(new_sd+1, &read_flags, &write_flags, (fd_set*)0, &waitd);
if(sel < 0)
continue;
//socket ready for reading
if(FD_ISSET(new_sd, &read_flags)) {
FD_CLR(new_sd, &read_flags);
memset(&in, 0, sizeof(in));
if(recv(new_sd, in, sizeof(in), 0) <= 0) {
close(new_sd);
break;
}
else
cout<<"
"<<in;
} //end if ready for read
//socket ready for writing
if(FD_ISSET(new_sd, &write_flags)) {
FD_CLR(new_sd, &write_flags);
send(new_sd, out, strlen(out), 0);
memset(&out, 0, sizeof(out));
}
} //end while
cout<<"
Exiting normally
";
return 0;
}
客户端(基本相同，只是减去了一个接受调用) -
Client (basically the same just minus an accept call) -
#define PORT "4950"
struct sockaddr name;
void set_nonblock(int socket) {
int flags;
flags = fcntl(socket,F_GETFL,0);
assert(flags != -1);
fcntl(socket, F_SETFL, flags | O_NONBLOCK);
}
// get sockaddr, IPv4 or IPv6:
void *get_in_addr(struct sockaddr *sa) {
if (sa->sa_family == AF_INET)
return &(((struct sockaddr_in*)sa)->sin_addr);
return &(((struct sockaddr_in6*)sa)->sin6_addr);
}
int main(int agrc, char** argv) {
int status, sock, adrlen;
struct addrinfo hints;
struct addrinfo *servinfo; //will point to the results
fd_set read_flags,write_flags; // the flag sets to be used
struct timeval waitd; // the max wait time for an event
int sel; // holds return value for select();
memset(&hints, 0, sizeof hints); //make sure the struct is empty
hints.ai_family = AF_INET;
hints.ai_socktype = SOCK_STREAM; //tcp
hints.ai_flags = AI_PASSIVE; //use local-host address
//get server info, put into servinfo
if ((status = getaddrinfo("127.0.0.1", PORT, &hints, &servinfo)) != 0) {
fprintf(stderr, "getaddrinfo error: %s
", gai_strerror(status));
exit(1);
}
//make socket
sock = socket(servinfo->ai_family, servinfo->ai_socktype, servinfo->ai_protocol);
if (sock < 0) {
printf("
server socket failure %m", errno);
exit(1);
}
if(connect(sock, servinfo->ai_addr, servinfo->ai_addrlen) < 0) {
printf("
client connection failure %m", errno);
exit(1);
}
cout<<"
Successful connection!";
set_nonblock(sock);
char* out = new char[255];
char* in = new char[255];
int numRead;
int numSent;
while(1) {
waitd.tv_sec = 10;
FD_ZERO(&read_flags);
FD_ZERO(&write_flags);
FD_SET(sock, &read_flags);
if(strlen(out) != 0)
FD_SET(sock, &write_flags);
sel = select(sock+1, &read_flags, &write_flags, (fd_set*)0, &waitd);
if(sel < 0)
continue;
//socket ready for reading
if(FD_ISSET(sock, &read_flags)) {
FD_CLR(sock, &read_flags);
memset(&in, 0, sizeof(in));
if(recv(sock, in, sizeof(in), 0) <= 0) {
close(sock);
break;
}
else
cout<<"
"<<in;
} //end if ready for read
//socket ready for writing
if(FD_ISSET(sock, &write_flags)) {
FD_CLR(sock, &write_flags);
send(sock, out, strlen(out), 0);
memset(&out, 0, sizeof(out));
}
} //end while
cout<<"
Exiting normally
";
return 0;
}
问题是当我运行它们时，什么也没有发生.我可以输入一个并按回车键，另一个屏幕上没有任何显示(反之亦然).这不是我要调试的全部信息，这是我第一次真正尝试使用 select 所以我想也许我只是不知道一些简单的事情.如果发现任何错误或奇怪的地方，请指出，感谢您的帮助.
The problem is that when I run them, nothing happens. I can type into one and hit enter and nothing shows up on the other screen (and vice versa). Thats not a whole of information for me to debug and this is my first real attempt at using select so I thought maybe I am just unaware of something simple. If anything can be spotted as wrong or weird please point it out, any help is appreciated.
推荐答案
我的程序现在可以正常运行了.
I have the program working correctly now.
服务器 -
#define PORT "4950"
#define STDIN 0
struct sockaddr name;
void set_nonblock(int socket) {
int flags;
flags = fcntl(socket,F_GETFL,0);
assert(flags != -1);
fcntl(socket, F_SETFL, flags | O_NONBLOCK);
}
// get sockaddr, IPv4 or IPv6:
void *get_in_addr(struct sockaddr *sa) {
if (sa->sa_family == AF_INET)
return &(((struct sockaddr_in*)sa)->sin_addr);
return &(((struct sockaddr_in6*)sa)->sin6_addr);
}
int main(int agrc, char** argv) {
int status, sock, adrlen, new_sd;
struct addrinfo hints;
struct addrinfo *servinfo; //will point to the results
//store the connecting address and size
struct sockaddr_storage their_addr;
socklen_t their_addr_size;
fd_set read_flags,write_flags; // the flag sets to be used
struct timeval waitd = {10, 0}; // the max wait time for an event
int sel; // holds return value for select();
//socket infoS
memset(&hints, 0, sizeof hints); //make sure the struct is empty
hints.ai_family = AF_INET;
hints.ai_socktype = SOCK_STREAM; //tcp
hints.ai_flags = AI_PASSIVE; //use local-host address
//get server info, put into servinfo
if ((status = getaddrinfo("127.0.0.1", PORT, &hints, &servinfo)) != 0) {
fprintf(stderr, "getaddrinfo error: %s
", gai_strerror(status));
exit(1);
}
//make socket
sock = socket(servinfo->ai_family, servinfo->ai_socktype, servinfo->ai_protocol);
if (sock < 0) {
printf("
server socket failure %m", errno);
exit(1);
}
//allow reuse of port
int yes=1;
if (setsockopt(sock,SOL_SOCKET,SO_REUSEADDR,&yes,sizeof(int)) == -1) {
perror("setsockopt");
exit(1);
}
//unlink and bind
unlink("127.0.0.1");
if(bind (sock, servinfo->ai_addr, servinfo->ai_addrlen) < 0) {
printf("
Bind error %m", errno);
exit(1);
}
freeaddrinfo(servinfo);
//listen
if(listen(sock, 5) < 0) {
printf("
Listen error %m", errno);
exit(1);
}
their_addr_size = sizeof(their_addr);
//accept
new_sd = accept(sock, (struct sockaddr*)&their_addr, &their_addr_size);
if( new_sd < 0) {
printf("
Accept error %m", errno);
exit(1);
}
//set non blocking
set_nonblock(new_sd);
cout<<"
Successful Connection!
";
char in[255];
char out[255];
memset(&in, 0, 255);
memset(&out, 0, 255);
int numSent;
int numRead;
while(1) {
FD_ZERO(&read_flags);
FD_ZERO(&write_flags);
FD_SET(new_sd, &read_flags);
FD_SET(new_sd, &write_flags);
FD_SET(STDIN_FILENO, &read_flags);
FD_SET(STDIN_FILENO, &write_flags);
sel = select(new_sd+1, &read_flags, &write_flags, (fd_set*)0, &waitd);
//if an error with select
if(sel < 0)
continue;
//socket ready for reading
if(FD_ISSET(new_sd, &read_flags)) {
//clear set
FD_CLR(new_sd, &read_flags);
memset(&in, 0, 255);
numRead = recv(new_sd, in, 255, 0);
if(numRead <= 0) {
printf("
Closing socket");
close(new_sd);
break;
}
else if(in[0] != ' ')
cout<<"
Client: "<<in;
} //end if ready for read
//if stdin is ready to be read
if(FD_ISSET(STDIN_FILENO, &read_flags))
fgets(out, 255, stdin);
//socket ready for writing
if(FD_ISSET(new_sd, &write_flags)) {
//printf("
Socket ready for write");
FD_CLR(new_sd, &write_flags);
send(new_sd, out, 255, 0);
memset(&out, 0, 255);
} //end if
} //end while
cout<<"
Exiting normally
";
return 0;
}
客户基本上是一样的......唯一的区别真的是缺乏倾听和接受.
The client is basically the same...only difference really is the lack of listen and accept.
这篇关于对非阻塞套接字使用 select()的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
