Rabbit mq - 等待 Mnesia 表时出错 [英] Rabbit mq - Error while waiting for Mnesia tables
本文介绍了Rabbit mq - 等待 Mnesia 表时出错的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我在 kubernetes 集群上使用 helm chart 安装了 rabbitmq.rabbitmq pod 不断重启.在检查 pod 日志时，我收到以下错误
I have installed rabbitmq using helm chart on a kubernetes cluster. The rabbitmq pod keeps restarting. On inspecting the pod logs I get the below error
2020-02-26 04:42:31.582 [warning] <0.314.0> Error while waiting for Mnesia tables: {timeout_waiting_for_tables,[rabbit_durable_queue]}
2020-02-26 04:42:31.582 [info] <0.314.0> Waiting for Mnesia tables for 30000 ms, 6 retries left
当我尝试执行 kubectl describe pod 时出现此错误
When I try to do kubectl describe pod I get this error
Conditions:
Type Status
Initialized True
Ready False
ContainersReady False
PodScheduled True
Volumes:
data:
Type: PersistentVolumeClaim (a reference to a PersistentVolumeClaim in the same namespace)
ClaimName: data-rabbitmq-0
ReadOnly: false
config-volume:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: rabbitmq-config
Optional: false
healthchecks:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: rabbitmq-healthchecks
Optional: false
rabbitmq-token-w74kb:
Type: Secret (a volume populated by a Secret)
SecretName: rabbitmq-token-w74kb
Optional: false
QoS Class: Burstable
Node-Selectors: beta.kubernetes.io/arch=amd64
Tolerations: node.kubernetes.io/not-ready:NoExecute for 300s
node.kubernetes.io/unreachable:NoExecute for 300s
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Warning Unhealthy 3m27s (x878 over 7h21m) kubelet, gke-analytics-default-pool-918f5943-w0t0 Readiness probe failed: Timeout: 70 seconds ...
Checking health of node rabbit@rabbitmq-0.rabbitmq-headless.default.svc.cluster.local ...
Status of node rabbit@rabbitmq-0.rabbitmq-headless.default.svc.cluster.local ...
Error:
{:aborted, {:no_exists, [:rabbit_vhost, [{{:vhost, :"$1", :_, :_}, [], [:"$1"]}]]}}
Error:
{:aborted, {:no_exists, [:rabbit_vhost, [{{:vhost, :"$1", :_, :_}, [], [:"$1"]}]]}}
我已在 Kubernetes 集群上的 Google Cloud 上配置了上述内容.我不确定它是在什么特定情况下开始失败的.我不得不重新启动 pod，从那以后它一直失败.
I have provisioned the above on Google Cloud on a kubernetes cluster. I am not sure during what specific situation it started failing. I had to restart the pod and since then it has been failing.
这里有什么问题?
推荐答案
测试这个部署:
kind: Service
apiVersion: v1
metadata:
namespace: rabbitmq-namespace
name: rabbitmq
labels:
app: rabbitmq
type: LoadBalancer
spec:
type: NodePort
ports:
- name: http
protocol: TCP
port: 15672
targetPort: 15672
nodePort: 31672
- name: amqp
protocol: TCP
port: 5672
targetPort: 5672
nodePort: 30672
- name: stomp
protocol: TCP
port: 61613
targetPort: 61613
selector:
app: rabbitmq
---
kind: Service
apiVersion: v1
metadata:
namespace: rabbitmq-namespace
name: rabbitmq-lb
labels:
app: rabbitmq
spec:
# Headless service to give the StatefulSet a DNS which is known in the cluster (hostname-#.app.namespace.svc.cluster.local, )
# in our case - rabbitmq-#.rabbitmq.rabbitmq-namespace.svc.cluster.local
clusterIP: None
ports:
- name: http
protocol: TCP
port: 15672
targetPort: 15672
- name: amqp
protocol: TCP
port: 5672
targetPort: 5672
- name: stomp
port: 61613
selector:
app: rabbitmq
---
apiVersion: v1
kind: ConfigMap
metadata:
name: rabbitmq-config
namespace: rabbitmq-namespace
data:
enabled_plugins: |
[rabbitmq_management,rabbitmq_peer_discovery_k8s,rabbitmq_stomp].
rabbitmq.conf: |
## Cluster formation. See http://www.rabbitmq.com/cluster-formation.html to learn more.
cluster_formation.peer_discovery_backend = rabbit_peer_discovery_k8s
cluster_formation.k8s.host = kubernetes.default.svc.cluster.local
## Should RabbitMQ node name be computed from the pod's hostname or IP address?
## IP addresses are not stable, so using [stable] hostnames is recommended when possible.
## Set to "hostname" to use pod hostnames.
## When this value is changed, so should the variable used to set the RABBITMQ_NODENAME
## environment variable.
cluster_formation.k8s.address_type = hostname
## Important - this is the suffix of the hostname, as each node gets "rabbitmq-#", we need to tell what's the suffix
## it will give each new node that enters the way to contact the other peer node and join the cluster (if using hostname)
cluster_formation.k8s.hostname_suffix = .rabbitmq.rabbitmq-namespace.svc.cluster.local
## How often should node cleanup checks run?
cluster_formation.node_cleanup.interval = 30
## Set to false if automatic removal of unknown/absent nodes
## is desired. This can be dangerous, see
## * http://www.rabbitmq.com/cluster-formation.html#node-health-checks-and-cleanup
## * https://groups.google.com/forum/#!msg/rabbitmq-users/wuOfzEywHXo/k8z_HWIkBgAJ
cluster_formation.node_cleanup.only_log_warning = true
cluster_partition_handling = autoheal
## See http://www.rabbitmq.com/ha.html#master-migration-data-locality
queue_master_locator=min-masters
## See http://www.rabbitmq.com/access-control.html#loopback-users
loopback_users.guest = false
---
apiVersion: apps/v1
kind: StatefulSet
metadata:
name: rabbitmq
namespace: rabbitmq-namespace
spec:
serviceName: rabbitmq
replicas: 3
selector:
matchLabels:
name: rabbitmq
template:
metadata:
labels:
app: rabbitmq
name: rabbitmq
state: rabbitmq
annotations:
pod.alpha.kubernetes.io/initialized: "true"
spec:
serviceAccountName: rabbitmq
terminationGracePeriodSeconds: 10
containers:
- name: rabbitmq-k8s
image: rabbitmq:3.8.3
volumeMounts:
- name: config-volume
mountPath: /etc/rabbitmq
- name: data
mountPath: /var/lib/rabbitmq/mnesia
ports:
- name: http
protocol: TCP
containerPort: 15672
- name: amqp
protocol: TCP
containerPort: 5672
livenessProbe:
exec:
command: ["rabbitmqctl", "status"]
initialDelaySeconds: 60
periodSeconds: 60
timeoutSeconds: 10
resources:
requests:
memory: "0"
cpu: "0"
limits:
memory: "2048Mi"
cpu: "1000m"
readinessProbe:
exec:
command: ["rabbitmqctl", "status"]
initialDelaySeconds: 20
periodSeconds: 60
timeoutSeconds: 10
imagePullPolicy: Always
env:
- name: MY_POD_IP
valueFrom:
fieldRef:
fieldPath: status.podIP
- name: NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
- name: HOSTNAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: RABBITMQ_USE_LONGNAME
value: "true"
# See a note on cluster_formation.k8s.address_type in the config file section
- name: RABBITMQ_NODENAME
value: "rabbit@$(HOSTNAME).rabbitmq.$(NAMESPACE).svc.cluster.local"
- name: K8S_SERVICE_NAME
value: "rabbitmq"
- name: RABBITMQ_ERLANG_COOKIE
value: "mycookie"
volumes:
- name: config-volume
configMap:
name: rabbitmq-config
items:
- key: rabbitmq.conf
path: rabbitmq.conf
- key: enabled_plugins
path: enabled_plugins
volumeClaimTemplates:
- metadata:
name: data
spec:
accessModes:
- "ReadWriteOnce"
storageClassName: "default"
resources:
requests:
storage: 3Gi
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: rabbitmq
namespace: rabbitmq-namespace
---
kind: Role
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: endpoint-reader
namespace: rabbitmq-namespace
rules:
- apiGroups: [""]
resources: ["endpoints"]
verbs: ["get"]
---
kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: endpoint-reader
namespace: rabbitmq-namespace
subjects:
- kind: ServiceAccount
name: rabbitmq
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: Role
name: endpoint-reader
这篇关于Rabbit mq - 等待 Mnesia 表时出错的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
