从 Windows 7 Enterprise 到 Samsung Galaxy Tab A 在 Chrome 开发人员工具中进行远程调试时未检测到设备 [英] No devices detected when remote debugging in Chrome Developer Tools from Windows 7 Enterprise to Samsung Galaxy Tab A

查看:31
本文介绍了从 Windows 7 Enterprise 到 Samsung Galaxy Tab A 在 Chrome 开发人员工具中进行远程调试时未检测到设备的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

我在 Samsung Galaxy Tab A 的 Chrome 上遇到问题.

我想使用 Chrome 的 Developer Tools 对它们进行故障排除.

I want to troubleshoot them with Chrome's Developer Tools.

在平板电脑上,您无法访问 Chrome 的 Developer Tools,因此您需要设置 Remote Debugging.

On tablets you do not have access to Chrome's Developer Tools, so you need to set up Remote Debugging.

过程,根据 Google 的官方文档,应该本质上是:

The process, according to Google's official documentation, should essentially be:

1) 在 PC 上安装所需的驱动程序,以便可以识别平板电脑.

1) Install the required driver on the PC so the tablet can be recognised.

2) 通过 USB 数据线将平板电脑连接到 PC.

2) Connect the tablet to the PC via USB cable.

2) 在 PC 上,转到 Chrome >开发者工具 >菜单>更多工具 >远程设备

2) On PC, go to Chrome > Developer Tools > Menu > More Tools > Remote devices

平板电脑未在 PC 上的 chrome 开发者工具中显示为设备.

The tablet is not showing up as a device in developer tools in chrome on PC.

我的尝试

我和三星聊天,他们说要安装 Smart Switch PC_Setup.exe 将安装驱动程序,以便可以识别 Android 设备.

I chatted to Samsung and they said to install Smart Switch PC_Setup.exe which would install driver so that Android device can be recognised.

由于这不起作用,我遵循了各种帖子建议并安装了:

As that didn't work I followed various post suggestions and installed:

  • SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB) 来自 这里

SDK Platform-Tools for Windows (7.16MB) 来自 这里

sdk-tools-windows-3859397 (132MB) 来自页面底部 这里

所有这些都包含我不知道如何使用的 exe 文件 - 如果我双击它们,它们只会打开和关闭一个终端.

All of these contain exe files that I don't know how to use - if I double click them they just open and close a terminal.

期望的行为

让平板电脑在 Chrome 开发者工具中显示为设备.

To have tablet show as a device in Chrome developer tools.

推荐答案

这是我在 Chrome 开发者工具中显示设备的解决方案:

This was my solution to show device in Chrome Developer Tools:

1)这里.

2) 提取 zip 文件.

2) Extract zip file.

3) 在 Windows 终端中运行相当于:

3) In Windows terminal run your equivalent of:

D:UsersYoupath_to_extracted_folderadb.exe devices

一开始我得到了:

[5203253125 - long number] unauthorised

然后我想我从平板电脑上拔下并重新插入 USB 电缆,平板电脑上有提示:

And then I think I unplugged and replugged USB cable from tablet and there was a prompt on the tablet:

Allow USB Debugging?
The computer's RSA key fingerprint is:
blah blah etc

我点击OK

我现在可以在 Chrome 开发者工具中看到设备了!

And I can now see device in Chrome Developer Tools!

这篇关于从 Windows 7 Enterprise 到 Samsung Galaxy Tab A 在 Chrome 开发人员工具中进行远程调试时未检测到设备的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!

查看全文
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆