如何从libop codeS得到指令信息？ [英] How to get instruction information from libopcodes?

查看：165
本文介绍了如何从libop codeS得到指令信息？的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！

问题描述

我写一个工具，它使用了 libbfd 和 libop codeS 中的x86-32和x86的64的Linux进行拆卸。现在的问题是，虽然我能够得到libop codeS拆开，我无法得到任何指令信息。出于演示的目的，我做了一个最小的例子重现我的问题。该计划应切入点拆开自己的第一个 RET / RETQ 。

I am writing a tool which uses libbfd and libopcodes in x86-32 and x86-64 Linux to perform disassembly. The problem is that whilst I am able to get libopcodes to disassemble, I am unable to get any instruction information. For the purposes of demonstration, I have made a minimal example which reproduces my issue. The program should disassemble itself from entry point to the first RET/RETQ.

在code是一个有点砍死了全局和错误检查已为简洁起见，省略等，但应清楚地说明这个问题。

The code is a bit hacked up with globals and error checking has been omitted for brevity, etc. but should illustrate the issue clearly.

#include <bfd.h>
#include <dis-asm.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <string.h>
#include <ctype.h>
#include <limits.h>
#include <libiberty.h>

/*
 * Holds state for BFD and libopcodes.
 */
bfd *        abfd  = NULL;
disassemble_info dinfo = {0};

/*
 * Temporary hack to signal when disassembling should stop.
 */
static bool stop_disassembling = FALSE;

/*
 * Gets path to currently running executable.
 */
bool get_target_path(char * target_path, size_t size)
{
    char *   path;
    ssize_t len;

    pid_t pid = getpid();
    sprintf(target_path, "/proc/%d/exe", (int)pid );

    path = strdup(target_path);
    len  = readlink(path, target_path, size);

    target_path[len] = '\0';
    free(path);
    return TRUE;
}

/*
 * libopcodes appends spaces on the end of some instructions so for
 * comparisons, we want to strip those first.
 */
void strip_tail(char * str, unsigned int size)
{
    int i;
    for(i = 0; i < size; i++) {
        if(!isgraph(str[i])) {
            str[i] = '\0';
            break;
        }
    }
}

/*
 * Checks whether the current instruction will cause the control flow to not
 * proceed to the linearly subsequent instruction (e.g. ret, jmp, etc.)
 */
bool breaks_control_flow(char * str)
{
    if(abfd->arch_info->bits_per_address == 64) {
        if(strcmp(str, "retq") == 0) {
            return TRUE;
        }
    } else {
        if(strcmp(str, "ret") == 0) {
            return TRUE;
        }
    }

    return FALSE;
}

/*
 * Used as a callback for libopcodes so we can do something useful with the
 * disassembly. Currently this just outputs to stdout.
 */
int custom_fprintf(void * stream, const char * format, ...)
{
    /* silly amount */
    char    str[128] = {0};
    int rv;
    va_list args;

    va_start(args, format);
    rv = vsnprintf(str, ARRAY_SIZE(str) - 1, format, args);
    va_end(args);

    puts(str);
    strip_tail(str, ARRAY_SIZE(str));

    if(breaks_control_flow(str)) {
        puts("Stopped disassembly");
        stop_disassembling = TRUE;
    }

    if(dinfo.insn_info_valid) {
        switch(dinfo.insn_type) {
            case dis_noninsn:
                printf("not an instruction\n");
                break;
            case dis_nonbranch:
                printf("not a branch\n");
                break;
            case dis_branch:
                printf("is a branch\n");
                break;
            case dis_condbranch:
                printf("is a conditional branch\n");
                break;
            case dis_jsr:
                printf("jump to subroutine\n");
                break;
            case dis_condjsr:
                printf("conditional jump to subroutine\n");
                break;
            case dis_dref:
                printf("data reference in instruction\n");
                break;
            case dis_dref2:
                printf("two data references in instruction\n");
                break;
            default:
                printf("not enumerated\n");
                break;
        }
    } else {
        printf("insn_info not valid\n");
    }

    return rv;
}

/*
 * Initialises libopcodes disassembler and returns an instance of it.
 */
disassembler_ftype init_disasm(bfd * abfd, disassemble_info * dinfo)
{
    /* Override the stream the disassembler outputs to */
    init_disassemble_info(dinfo, NULL, custom_fprintf);
    dinfo->flavour = bfd_get_flavour(abfd);
    dinfo->arch    = bfd_get_arch(abfd);
    dinfo->mach    = bfd_get_mach(abfd);
    dinfo->endian  = abfd->xvec->byteorder;
    disassemble_init_for_target(dinfo);

    return disassembler(abfd);
}

/*
 * Method of locating section from VMA taken from opdis.
 */
typedef struct {
    bfd_vma    vma;
    asection * sec;
} BFD_VMA_SECTION;

/*
 * Loads section and fills in dinfo accordingly. Since this function allocates
 * memory in dinfo->buffer, callers need to call free once they are finished.
 */
bool load_section(bfd * abfd, disassemble_info * dinfo, asection * s)
{
    int     size = bfd_section_size(s->owner, s);
    unsigned char * buf  = xmalloc(size);

    if(!bfd_get_section_contents(s->owner, s, buf, 0, size)) {
        free(buf);
        return FALSE;
    }

    dinfo->section       = s;
    dinfo->buffer        = buf;
    dinfo->buffer_length = size;
    dinfo->buffer_vma    = bfd_section_vma(s->owner, s);

    printf("Allocated %d bytes for %s section\n: 0x%lX", size, s->name,
            dinfo->buffer_vma);
    return TRUE;
}

/*
 * Used to locate section for a vma.
 */
void vma_in_section(bfd * abfd, asection * s, void * data)
{
    BFD_VMA_SECTION * req = data;

    if(req && req->vma >= s->vma &&
    req->vma < (s->vma + bfd_section_size(abfd, s)) ) {
        req->sec = s;
    }
}

/*
 * Locate and load section containing vma.
 */
bool load_section_for_vma(bfd * abfd, disassemble_info * dinfo,
        bfd_vma vma)
{
    BFD_VMA_SECTION req = {vma, NULL};
    bfd_map_over_sections(abfd, vma_in_section, &req);

    if(!req.sec) {
        return FALSE;
    } else {
        return load_section(abfd, dinfo, req.sec);
    }
}

/*
 * Start disassembling from entry point.
 */
bool disassemble_entry(bfd * abfd, disassemble_info * dinfo,
        disassembler_ftype disassembler)
{
    bfd_vma    vma = bfd_get_start_address(abfd);

    /* First locate and load the section containing the vma */
    if(load_section_for_vma(abfd, dinfo, vma)) {
        int size;

        /* Keep disassembling until signalled otherwise or error */
        while(true) {
            dinfo->insn_info_valid = 0;
            size = disassembler(vma, dinfo);
            printf("Disassembled %d bytes at 0x%lX\n", size, vma);

            if(size == 0 || size == -1 || stop_disassembling) {
                break;
            }

            vma += size;
        }

        free(dinfo->buffer);
        return TRUE;
    }

    return FALSE;
}

int main(void)
{
    char  target_path[PATH_MAX] = {0};

    bfd_init();

    /* Get path for the running instance of this program */
    get_target_path(target_path, ARRAY_SIZE(target_path));

    abfd = bfd_openr(target_path, NULL);

    if(abfd != NULL && bfd_check_format(abfd, bfd_object)) {
        disassembler_ftype disassembler = init_disasm(abfd, &dinfo);

        disassemble_entry(abfd, &dinfo, disassembler);

        bfd_close(abfd);
    }

    return EXIT_SUCCESS;
}

这源可以与以下 Makefile中建。要成功执行环节，的binutils-dev的包需要在本地计算机上安装：

This source can be built with the following makefile. To perform a successful link, the binutils-dev package needs to be installed on the local machine:

all:
    gcc -Wall disasm.c -o disasm -lbfd -lopcodes

clean:
    rm -f disasm

在运行时，输出是这样的：

When run, the output is this:

Allocated 2216 bytes for .text section
: 0x400BF0xor    
insn_info not valid
%ebp
insn_info not valid
,
insn_info not valid
%ebp
insn_info not valid
Disassembled 2 bytes at 0x400BF0
mov    
insn_info not valid
%rdx
insn_info not valid
,
insn_info not valid
%r9
insn_info not valid
Disassembled 3 bytes at 0x400BF2
pop    
insn_info not valid
%rsi
insn_info not valid
Disassembled 1 bytes at 0x400BF5
mov    
insn_info not valid
%rsp
insn_info not valid
,
insn_info not valid
%rdx
insn_info not valid
Disassembled 3 bytes at 0x400BF6
and    
insn_info not valid
$0xfffffffffffffff0
insn_info not valid
,
insn_info not valid
%rsp
insn_info not valid
Disassembled 4 bytes at 0x400BF9
push   
insn_info not valid
%rax
insn_info not valid
Disassembled 1 bytes at 0x400BFD
push   
insn_info not valid
%rsp
insn_info not valid
Disassembled 1 bytes at 0x400BFE
mov    
insn_info not valid
$0x401450
insn_info not valid
,
insn_info not valid
%r8
insn_info not valid
Disassembled 7 bytes at 0x400BFF
mov    
insn_info not valid
$0x4013c0
insn_info not valid
,
insn_info not valid
%rcx
insn_info not valid
Disassembled 7 bytes at 0x400C06
mov    
insn_info not valid
$0x4012ce
insn_info not valid
,
insn_info not valid
%rdi
insn_info not valid
Disassembled 7 bytes at 0x400C0D
callq  
insn_info not valid
0x0000000000400ad8
insn_info not valid
Disassembled 5 bytes at 0x400C14
hlt    
insn_info not valid
Disassembled 1 bytes at 0x400C19
nop
insn_info not valid
Disassembled 1 bytes at 0x400C1A
nop
insn_info not valid
Disassembled 1 bytes at 0x400C1B
sub    
insn_info not valid
$0x8
insn_info not valid
,
insn_info not valid
%rsp
insn_info not valid
Disassembled 4 bytes at 0x400C1C
mov    
insn_info not valid
0x2013b9(%rip)
insn_info not valid
,
insn_info not valid
%rax
insn_info not valid
        # 
insn_info not valid
0x0000000000601fe0
insn_info not valid
Disassembled 7 bytes at 0x400C20
test   
insn_info not valid
%rax
insn_info not valid
,
insn_info not valid
%rax
insn_info not valid
Disassembled 3 bytes at 0x400C27
je     
insn_info not valid
0x0000000000400c2e
insn_info not valid
Disassembled 2 bytes at 0x400C2A
callq  
insn_info not valid
*%rax
insn_info not valid
Disassembled 2 bytes at 0x400C2C
add    
insn_info not valid
$0x8
insn_info not valid
,
insn_info not valid
%rsp
insn_info not valid
Disassembled 4 bytes at 0x400C2E
retq   
Stopped disassembly
insn_info not valid
Disassembled 1 bytes at 0x400C32

我所希望的是能够读取指令信息通过 dinfo-＆GT每个指令; insn_type ，目标等行为展上双方的x86-32和x86-64。如果我至少可以得到确认，这是这两种架构未实现的话，我可以去在这个信息填写自己

What I am expecting is to be able to read instruction information for each instruction through the dinfo->insn_type, target, etc. The behaviour is exhibited on both x86-32 and x86-64. If I can at least get confirmation that this is unimplemented on these two architectures then I can go about filling in this information myself.

推荐答案

不幸的是，binutils的libop codeS 2.22， insn_type 未填写在任I386或x86_64。唯一wides $ P $垫支持的架构是MIPS，Sparc和Cell的SPU。这仍然是当期CVS HEAD也是如此。

Unfortunately, as of binutils libopcodes 2.22, insn_type is not filled in on either i386 or x86_64. The only widespread supported architectures are MIPS, Sparc, and the Cell’s SPU. This is still true as of current CVS HEAD.

很难证明东西是不存在的，但例如，在<一href=\"http://sourceware.org/cgi-bin/cvsweb.cgi/src/op$c$cs/sparc-dis.c?rev=1.18&content-type=text/x-cvsweb-markup&cvsroot=src\"相对=nofollow> SPARC的反汇编源你可以看到几个出现 insn_type 是一套，例如信息 - ＆GT; insn_type = dis_branch ，而在<一个href=\"http://sourceware.org/cgi-bin/cvsweb.cgi/src/op$c$cs/i386-dis.c?rev=1.267&content-type=text/x-cvsweb-markup&cvsroot=src\"相对=nofollow> i386的反汇编源没有 insn_type 也没有任何它预计将有值（ dis_branch ， dis_nonbranch 等）。

It's hard to prove that something does not exist, but for instance, in the Sparc disassembler source you can see several occurrences of insn_type being set, for instance info->insn_type = dis_branch, whereas in the i386 disassembler source there are no occurrences of insn_type nor any of the values it would be expected to have (dis_branch, dis_nonbranch etc.).

检查所有支持 insn_type 你得到的libop codeS文件：

Checking for all the libopcodes files that support insn_type you get:


  • 运算codeS / MIPS-dis.c

  • 运算codeS / SPU-dis.c

  • 运算codeS / MicroBlaze的-dis.c

  • 运算codeS /克里斯 - dis.c

  • 运算codeS / SPARC-dis.c

  • 运算codeS / MMIX-dis.c

  • opcodes/mips-dis.c
  • opcodes/spu-dis.c
  • opcodes/microblaze-dis.c
  • opcodes/cris-dis.c
  • opcodes/sparc-dis.c
  • opcodes/mmix-dis.c

这篇关于如何从libop codeS得到指令信息？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！

查看全文
相关文章
服务器开发最新文章
热门教程
热门工具
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆