如何读取文本文件反向在C＃中的迭代器 [英] How to read a text file reversely with iterator in C#
本文介绍了如何读取文本文件反向在C＃中的迭代器的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我需要处理大量文件，400K左右线和200 M.但有时我不得不从自下而上的流程。如何使用迭代器（收益率回报）在这里？基本上我不喜欢加载在内存中的一切。我知道这是更有效地使用在.NET中的迭代器。
I need to process a large file, around 400K lines and 200 M. But sometimes I have to process from bottom up. How can I use iterator (yield return) here? Basically I don't like to load everything in memory. I know it is more efficient to use iterator in .NET.
推荐答案
读取文本文件向后实在是棘手的，除非你使用一个固定大小的编码（如ASCII）。当你有大小可变的编码（如UTF-8）你能不能让不必检查是否是在一个字符的中间或者是在你获取数据。
Reading text files backwards is really tricky unless you're using a fixed-size encoding (e.g. ASCII). When you've got variable-size encoding (such as UTF-8) you will keep having to check whether you're in the middle of a character or not when you fetch data.
有没有建到框架的，我怀疑你必须为每个可变长编码做单独的硬盘编码。
There's nothing built into the framework, and I suspect you'd have to do separate hard coding for each variable-width encoding.
编辑：这一直是的有些的测试 - 但是这并不是说这不还有周围的一些微妙的错误。它采用StreamUtil从MiscUtil，但只包括了必要的（新），从那里底部的方法。哦，它需要重构 - 有一pretty大幅方法，你会看到：
This has been somewhat tested - but that's not to say it doesn't still have some subtle bugs around. It uses StreamUtil from MiscUtil, but I've included just the necessary (new) method from there at the bottom. Oh, and it needs refactoring - there's one pretty hefty method, as you'll see:
using System;
using System.Collections;
using System.Collections.Generic;
using System.IO;
using System.Text;
namespace MiscUtil.IO
{
/// <summary>
/// Takes an encoding (defaulting to UTF-8) and a function which produces a seekable stream
/// (or a filename for convenience) and yields lines from the end of the stream backwards.
/// Only single byte encodings, and UTF-8 and Unicode, are supported. The stream
/// returned by the function must be seekable.
/// </summary>
public sealed class ReverseLineReader : IEnumerable<string>
{
/// <summary>
/// Buffer size to use by default. Classes with internal access can specify
/// a different buffer size - this is useful for testing.
/// </summary>
private const int DefaultBufferSize = 4096;
/// <summary>
/// Means of creating a Stream to read from.
/// </summary>
private readonly Func<Stream> streamSource;
/// <summary>
/// Encoding to use when converting bytes to text
/// </summary>
private readonly Encoding encoding;
/// <summary>
/// Size of buffer (in bytes) to read each time we read from the
/// stream. This must be at least as big as the maximum number of
/// bytes for a single character.
/// </summary>
private readonly int bufferSize;
/// <summary>
/// Function which, when given a position within a file and a byte, states whether
/// or not the byte represents the start of a character.
/// </summary>
private Func<long,byte,bool> characterStartDetector;
/// <summary>
/// Creates a LineReader from a stream source. The delegate is only
/// called when the enumerator is fetched. UTF-8 is used to decode
/// the stream into text.
/// </summary>
/// <param name="streamSource">Data source</param>
public ReverseLineReader(Func<Stream> streamSource)
: this(streamSource, Encoding.UTF8)
{
}
/// <summary>
/// Creates a LineReader from a filename. The file is only opened
/// (or even checked for existence) when the enumerator is fetched.
/// UTF8 is used to decode the file into text.
/// </summary>
/// <param name="filename">File to read from</param>
public ReverseLineReader(string filename)
: this(filename, Encoding.UTF8)
{
}
/// <summary>
/// Creates a LineReader from a filename. The file is only opened
/// (or even checked for existence) when the enumerator is fetched.
/// </summary>
/// <param name="filename">File to read from</param>
/// <param name="encoding">Encoding to use to decode the file into text</param>
public ReverseLineReader(string filename, Encoding encoding)
: this(() => File.OpenRead(filename), encoding)
{
}
/// <summary>
/// Creates a LineReader from a stream source. The delegate is only
/// called when the enumerator is fetched.
/// </summary>
/// <param name="streamSource">Data source</param>
/// <param name="encoding">Encoding to use to decode the stream into text</param>
public ReverseLineReader(Func<Stream> streamSource, Encoding encoding)
: this(streamSource, encoding, DefaultBufferSize)
{
}
internal ReverseLineReader(Func<Stream> streamSource, Encoding encoding, int bufferSize)
{
this.streamSource = streamSource;
this.encoding = encoding;
this.bufferSize = bufferSize;
if (encoding.IsSingleByte)
{
// For a single byte encoding, every byte is the start (and end) of a character
characterStartDetector = (pos, data) => true;
}
else if (encoding is UnicodeEncoding)
{
// For UTF-16, even-numbered positions are the start of a character
characterStartDetector = (pos, data) => (pos & 1) == 0;
}
else if (encoding is UTF8Encoding)
{
// For UTF-8, bytes with the top bit clear or the second bit set are the start of a character
// See http://www.cl.cam.ac.uk/~mgk25/unicode.html
characterStartDetector = (pos, data) => (data & 0x80) == 0 || (data & 0x40) != 0;
}
else
{
throw new ArgumentException("Only single byte, UTF-8 and Unicode encodings are permitted");
}
}
/// <summary>
/// Returns the enumerator reading strings backwards. If this method discovers that
/// the returned stream is either unreadable or unseekable, a NotSupportedException is thrown.
/// </summary>
public IEnumerator<string> GetEnumerator()
{
Stream stream = streamSource();
if (!stream.CanSeek)
{
stream.Dispose();
throw new NotSupportedException("Unable to seek within stream");
}
if (!stream.CanRead)
{
stream.Dispose();
throw new NotSupportedException("Unable to read within stream");
}
return GetEnumeratorImpl(stream);
}
private IEnumerator<string> GetEnumeratorImpl(Stream stream)
{
try
{
long position = stream.Length;
if (encoding is UnicodeEncoding && (position & 1) != 0)
{
throw new InvalidDataException("UTF-16 encoding provided, but stream has odd length.");
}
// Allow up to two bytes for data from the start of the previous
// read which didn't quite make it as full characters
byte[] buffer = new byte[bufferSize + 2];
char[] charBuffer = new char[encoding.GetMaxCharCount(buffer.Length)];
int leftOverData = 0;
String previousEnd = null;
// TextReader doesn't return an empty string if there's line break at the end
// of the data. Therefore we don't return an empty string if it's our *first*
// return.
bool firstYield = true;
// A line-feed at the start of the previous buffer means we need to swallow
// the carriage-return at the end of this buffer - hence this needs declaring
// way up here!
bool swallowCarriageReturn = false;
while (position > 0)
{
int bytesToRead = Math.Min(position > int.MaxValue ? bufferSize : (int)position, bufferSize);
position -= bytesToRead;
stream.Position = position;
StreamUtil.ReadExactly(stream, buffer, bytesToRead);
// If we haven't read a full buffer, but we had bytes left
// over from before, copy them to the end of the buffer
if (leftOverData > 0 && bytesToRead != bufferSize)
{
// Buffer.BlockCopy doesn't document its behaviour with respect
// to overlapping data: we *might* just have read 7 bytes instead of
// 8, and have two bytes to copy...
Array.Copy(buffer, bufferSize, buffer, bytesToRead, leftOverData);
}
// We've now *effectively* read this much data.
bytesToRead += leftOverData;
int firstCharPosition = 0;
while (!characterStartDetector(position + firstCharPosition, buffer[firstCharPosition]))
{
firstCharPosition++;
// Bad UTF-8 sequences could trigger this. For UTF-8 we should always
// see a valid character start in every 3 bytes, and if this is the start of the file
// so we've done a short read, we should have the character start
// somewhere in the usable buffer.
if (firstCharPosition == 3 || firstCharPosition == bytesToRead)
{
throw new InvalidDataException("Invalid UTF-8 data");
}
}
leftOverData = firstCharPosition;
int charsRead = encoding.GetChars(buffer, firstCharPosition, bytesToRead - firstCharPosition, charBuffer, 0);
int endExclusive = charsRead;
for (int i = charsRead - 1; i >= 0; i--)
{
char lookingAt = charBuffer[i];
if (swallowCarriageReturn)
{
swallowCarriageReturn = false;
if (lookingAt == '\r')
{
endExclusive--;
continue;
}
}
// Anything non-line-breaking, just keep looking backwards
if (lookingAt != '\n' && lookingAt != '\r')
{
continue;
}
// End of CRLF? Swallow the preceding CR
if (lookingAt == '\n')
{
swallowCarriageReturn = true;
}
int start = i + 1;
string bufferContents = new string(charBuffer, start, endExclusive - start);
endExclusive = i;
string stringToYield = previousEnd == null ? bufferContents : bufferContents + previousEnd;
if (!firstYield || stringToYield.Length != 0)
{
yield return stringToYield;
}
firstYield = false;
previousEnd = null;
}
previousEnd = endExclusive == 0 ? null : (new string(charBuffer, 0, endExclusive) + previousEnd);
// If we didn't decode the start of the array, put it at the end for next time
if (leftOverData != 0)
{
Buffer.BlockCopy(buffer, 0, buffer, bufferSize, leftOverData);
}
}
if (leftOverData != 0)
{
// At the start of the final buffer, we had the end of another character.
throw new InvalidDataException("Invalid UTF-8 data at start of stream");
}
if (firstYield && string.IsNullOrEmpty(previousEnd))
{
yield break;
}
yield return previousEnd ?? "";
}
finally
{
stream.Dispose();
}
}
IEnumerator IEnumerable.GetEnumerator()
{
return GetEnumerator();
}
}
}
// StreamUtil.cs:
public static class StreamUtil
{
public static void ReadExactly(Stream input, byte[] buffer, int bytesToRead)
{
int index = 0;
while (index < bytesToRead)
{
int read = input.Read(buffer, index, bytesToRead - index);
if (read == 0)
{
throw new EndOfStreamException
(String.Format("End of stream reached with {0} byte{1} left to read.",
bytesToRead - index,
bytesToRead - index == 1 ? "s" : ""));
}
index += read;
}
}
}
反馈非常欢迎。这很有趣：）
Feedback very welcome. This was fun :)
这篇关于如何读取文本文件反向在C＃中的迭代器的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
