创建替代TApplication进行实验？ [英] Creating replacement TApplication for experimentation?
问题描述
我有一天疯狂的想法，将一个全新的替换 TApplication 进行实验。我有一切要编译和运行，它确实显示正确的主窗体，一切都很好，但是在关闭窗体后，应用程序不会停止。我确信我从原来的Forms.pas TApplication（注册关闭事件）复制了所有必要的东西，但我看不到它工作。我必须以令人讨厌的方式终止调试会话。
I got the crazy idea one day to make a completely new replacement of TApplication for experimentation. I got everything to compile and run, and it does show the main form properly, everything responds good, but upon closing the form, the application does not halt. I'm sure I copied all the necessary stuff from the original Forms.pas TApplication (registering close event) but I don't see it working. I have to terminate the debug session the nasty way.
我在这个小实验中的目标是为非常简单的事情构建一个轻量级应用程序，而不是所有可能的东西，一个TApplication可以处理，大多数情况下，我在这样一个领域有一些很好的经验。
My goal in this little experiment is to build a lightweight application for very simple things instead of all the possible things a TApplication can handle, and also mostly so I have some good experience in such a field.
这是我现在拥有的单位，下面是它的实现。 / p>
Here's the unit as I have it now, and below is the implementation of it.
unit JDForms;
interface
uses
Forms, Classes, SysUtils, StrUtils, Windows, Win7, XPMan, Variants,
Messages, Dialogs;
type
TJDForm = class;
TJDApplication = class;
TJDApplicationThread = class;
TJDForm = class(TCustomForm)
private
public
published
end;
TJDApplication = class(TComponent)
private
fRunning: Bool;
fTerminated: Bool;
fThread: TJDApplicationThread;
fMainForm: TJDForm;
fOnMessage: TMessageEvent;
fShowMainForm: Bool;
fHandle: HWND;
procedure ThreadTerminated(Sender: TObject);
procedure HandleMessage;
procedure ProcessMessages;
function ProcessMessage(var Msg: TMsg): Boolean;
procedure ThreadSync(Sender: TObject);
public
constructor Create(AOwner: TComponent); override;
property Thread: TJDApplicationThread read fThread;
procedure Initialize;
procedure Run;
procedure CreateForm(InstanceClass: TComponentClass; var Reference);
procedure Terminate;
property Terminated: Bool read fTerminated;
procedure HandleException(Sender: TObject);
property Handle: HWND read fHandle;
published
property ShowMainForm: Bool read fShowMainForm write fShowMainForm;
property OnMessage: TMessageEvent read fOnMessage write fOnMessage;
end;
TJDApplicationThread = class(TThread)
private
fOwner: TJDApplication;
fStop: Bool;
fOnSync: TNotifyEvent;
procedure DoSync;
protected
procedure Execute; override;
public
constructor Create(AOwner: TJDApplication);
destructor Destroy; override;
procedure Start;
procedure Stop;
published
property OnSync: TNotifyEvent read fOnSync write fOnSync;
end;
var
JDApplication: TJDApplication;
implementation
procedure DoneApplication;
begin
with JDApplication do begin
if Handle <> 0 then ShowOwnedPopups(Handle, False);
//ShowHint := False;
Destroying;
DestroyComponents;
end;
end;
{ TJDApplication }
constructor TJDApplication.Create(AOwner: TComponent);
begin
fRunning:= False;
fTerminated:= False;
fMainForm:= nil;
fThread:= TJDApplicationThread.Create(Self);
fThread.FreeOnTerminate:= True;
fThread.OnTerminate:= ThreadTerminated;
fShowMainForm:= True;
end;
procedure TJDApplication.CreateForm(InstanceClass: TComponentClass; var Reference);
var
Instance: TComponent;
begin
Instance:= TComponent(InstanceClass.NewInstance);
TComponent(Reference) := Instance;
try
Instance.Create(Self);
except
TComponent(Reference):= nil;
raise;
end;
if (fMainForm = nil) and (Instance is TForm) then begin
TForm(Instance).HandleNeeded;
fMainForm:= TJDForm(Instance);
end;
end;
procedure TJDApplication.HandleException(Sender: TObject);
begin
{
if GetCapture <> 0 then SendMessage(GetCapture, WM_CANCELMODE, 0, 0);
if ExceptObject is Exception then
begin
if not (ExceptObject is EAbort) then
if Assigned(FOnException) then
FOnException(Sender, Exception(ExceptObject))
else
ShowException(Exception(ExceptObject));
end else
SysUtils.ShowException(ExceptObject, ExceptAddr);
}
end;
procedure TJDApplication.HandleMessage;
var
Msg: TMsg;
begin
if not ProcessMessage(Msg) then begin
//Idle(Msg);
end;
end;
function TJDApplication.ProcessMessage(var Msg: TMsg): Boolean;
var
Handled: Boolean;
begin
Result := False;
if PeekMessage(Msg, 0, 0, 0, PM_REMOVE) then
begin
Result := True;
if Msg.Message <> WM_QUIT then begin
Handled := False;
if Assigned(FOnMessage) then FOnMessage(Msg, Handled);
//if not IsHintMsg(Msg) and not Handled and not IsMDIMsg(Msg) and
//not IsKeyMsg(Msg) and not IsDlgMsg(Msg) then
begin
TranslateMessage(Msg);
DispatchMessage(Msg);
end;
end else begin
fTerminated:= True;
end;
end;
end;
procedure TJDApplication.ProcessMessages;
var
Msg: TMsg;
begin
while ProcessMessage(Msg) do {loop};
end;
procedure TJDApplication.Initialize;
begin
if InitProc <> nil then TProcedure(InitProc);
end;
procedure TJDApplication.Run;
begin {
fRunning := True;
try
AddExitProc(DoneApplication);
if FMainForm <> nil then
begin
case CmdShow of
SW_SHOWMINNOACTIVE: FMainForm.FWindowState := wsMinimized;
SW_SHOWMAXIMIZED: MainForm.WindowState := wsMaximized;
end;
if FShowMainForm then
if FMainForm.FWindowState = wsMinimized then
Minimize else
FMainForm.Visible := True;
repeat
try
HandleMessage;
except
HandleException(Self);
end;
until Terminated;
end;
finally
FRunning := False;
end;
}
fRunning:= True;
try
AddExitProc(DoneApplication);
if fMainForm <> nil then begin
fHandle:= fMainForm.Handle;
if fShowMainForm then begin
fMainForm.Show;
end;
fThread.Start;
repeat
try
HandleMessage;
//--- THREAD HANDLING MESSAGES ---
except
HandleException(Self);
end;
until fTerminated;
end else begin
//Main form is nil - can not run
end;
finally
fRunning:= False;
fTerminated:= True;
end;
end;
procedure TJDApplication.Terminate;
begin
fTerminated:= True;
try
fThread.Stop;
except
end;
if CallTerminateProcs then PostQuitMessage(0);
end;
procedure TJDApplication.ThreadTerminated(Sender: TObject);
begin
//Free objects
end;
procedure TJDApplication.ThreadSync(Sender: TObject);
var
Msg: TMsg;
begin
if not ProcessMessage(Msg) then begin
//Idle(Msg);
end;
end;
{ TJDApplicationThread }
constructor TJDApplicationThread.Create(AOwner: TJDApplication);
begin
inherited Create(True);
fOwner:= AOwner;
end;
destructor TJDApplicationThread.Destroy;
begin
inherited;
end;
procedure TJDApplicationThread.DoSync;
begin
Self.fOwner.ThreadSync(Self);
// if assigned(fOnSync) then fOnSync(Self);
end;
procedure TJDApplicationThread.Execute;
var
ST: Integer;
begin
ST:= 5;
fStop:= False;
while (not Terminated) and (not fStop) do begin
//----- BEGIN -----
Synchronize(DoSync);
//----- END -----
//Sleep(1000 * ST);
end;
end;
procedure TJDApplicationThread.Start;
begin
fStop:= False;
Resume;
end;
procedure TJDApplicationThread.Stop;
begin
fStop:= True;
Suspend;
end;
initialization
JDApplication:= TJDApplication.Create(nil);
finalization
if assigned(JDApplication) then begin
JDApplication.Free;
JDApplication:= nil;
end;
end.
这里是一个使用这个的应用程序：
And here's an application using this:
program Win7FormTestD7;
uses
Forms,
W7Form1 in 'W7Form1.pas' {Win7Form1},
JDForms in 'JDForms.pas';
begin
JDApplication.Initialize;
JDApplication.CreateForm(TWin7Form1, Win7Form1);
JDApplication.Run;
end.
窗体W7Form1只是一个简单的表单，并附有几个随机控件进行测试。
The form 'W7Form1' is just a plain form with a couple random controls on it to test with.
这里的用户不应该问我为什么要这样做的问题，我有我的理由。我通过做，不是通过某人显示我，或通过阅读一些书或找到一堆代码，我不知道它是如何工作的。这是一种让我更好地学习应用程序的方法，并且能够扩展我在现场的知识，以便将来能够构建更复杂的应用程序。
Users here should not ask the question of why I want to do this, I have my reasons. I learn by doing, not by someone showing me or by reading some book or finding a bunch of code which I don't know how it works. This is a way for me to better learn the workings of applications and be able to expand my knowledge in the field to be able to build more complex applications in the future.
推荐答案
请记住， TCustomForm 没有您的 TJDApplication 类的概念，仅适用于 Forms.TApplication 类。当 Forms.TApplication.Terminated 属性设置为True时，请确保您的 TJDApplication.Run（）方法正在退出。
Keep in mind that TCustomForm has no concept of your TJDApplication class, it only works with the Forms.TApplication class instead. Make sure your TJDApplication.Run() method is exiting when the Forms.TApplication.Terminated property has been set to True.
这篇关于创建替代TApplication进行实验？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
