从C#.NET应用程序中调用一个Delphi的DLL [英] Calling a Delphi DLL from a C# .NET application
问题描述
编辑:我已经发布了一个更好的实现这一点,如下。我离开这个在这里,所以响应才有意义。
我已经写一个DLL在Delphi中,并能够从C#调用它,传递和返回字符串做了许多搜索正确的方法。大量的信息是不完整或不正确。经过多次反复试验,我找到了解决办法。
I've done numerous searches for the correct method for writing a DLL in Delp and being able to call it from C#, passing and returning strings. A lot of the information was incomplete or incorrect. After much trial and error, I found the solution.
这是使用Delphi 2007和VS 2010编译的,我怀疑它会正常工作在其他版本中也是如此。
This was compiled using Delphi 2007 and VS 2010. I suspect it will work fine in other versions as well.
下面是德尔福code。记住要在项目中包含的版本信息。
Here's the Delphi code. Remember to include version information in the project.
library DelphiLibrary;
uses SysUtils;
// Compiled using Delphi 2007.
// NOTE: If your project doesn't have version information included, you may
// receive the error "The "ResolveManifestFiles" task failed unexpectedly"
// when compiling the C# application.
{$R *.res}
// Example function takes an input integer and input string, and returns
// inputInt + 1, and inputString + ' ' + IntToStr(outputInt) as output
// parameters. If successful, the return result is nil (null), otherwise it is
// the exception message string.
// NOTE: I've posted a better version of this below. You should use that instead.
function DelphiFunction(inputInt : integer; inputString : PAnsiChar;
out outputInt : integer; out outputString : PAnsiChar)
: PAnsiChar; stdcall; export;
var s : string;
begin
outputInt := 0;
outputString := nil;
try
outputInt := inputInt + 1;
s := inputString + ' ' + IntToStr(outputInt);
outputString := PAnsiChar(s);
Result := nil;
except
on e : exception do Result := PAnsiChar(e.Message);
end;
end;
// I would have thought having "export" at the end of the function declartion
// (above) would have been enough to export the function, but I couldn't get it
// to work without this line also.
exports DelphiFunction;
begin
end.
下面是C#code:
Here's the C# code:
using System;
using System.Runtime.InteropServices;
namespace CsharpApp
{
class Program
{
// I added DelphiLibrary.dll to my project (NOT in References, but
// "Add existing file"). In Properties for the dll, I set "BuildAction"
// to None, and "Copy to Output Directory" to "Copy always".
// Make sure your Delphi dll has version information included.
[DllImport("DelphiLibrary.dll",
CallingConvention = CallingConvention.StdCall,
CharSet = CharSet.Ansi)]
public static extern
string DelphiFunction(int inputInt, string inputString,
out int outputInt, out string outputString);
static void Main(string[] args)
{
int inputInt = 1;
string inputString = "This is a test";
int outputInt;
string outputString;
// NOTE: I've posted a better version of this below. You should use that instead.
Console.WriteLine("inputInt = {0}, intputString = \"{1}\"",
inputInt, inputString);
var errorString = DelphiFunction(inputInt, inputString,
out outputInt, out outputString);
if (errorString != null)
Console.WriteLine("Error = \"{0}\"", errorString);
else
Console.WriteLine("outputInt = {0}, outputString = \"{1}\"",
outputInt, outputString);
Console.Write("Press Enter:");
Console.ReadLine();
}
}
}
我希望这个信息可以帮助别人不一定要拉自己的头发和我一样多。
I hope this information helps someone else to not have to pull their hair out as much as I did.
推荐答案
根据答复我的文章(和一个大的谢谢那些谁指出了存在的问题),我已经创建了一个使用字符串缓冲区的一个新范例返回的字符串,而不是只返回PAnsiChars。
Based on responses to my post (and a big THANK YOU to those who pointed out the problems), I have created a new example that uses string buffers for the returned strings, instead of just returning PAnsiChars.
Delphi的DLL源:
Delphi DLL source:
library DelphiLibrary;
uses SysUtils;
// Compiled using Delphi 2007.
// NOTE: If your project doesn't have version information included, you may
// receive the error "The "ResolveManifestFiles" task failed unexpectedly"
// when compiling the C# application.
{$R *.res}
// A note on returing strings. I had originally written this so that the
// output string was just a PAnsiChar. But several people pointed out that
// since Delphi strings are reference-counted, this was a bad idea since the
// memory for the string could get overwritten before it was used.
//
// Because of this, I re-wrote the example so that you have to pass a buffer for
// the result strings. I saw some examples of how to do this, where they
// returned the actual string length also. This isn't necessary, because the
// string is null-terminated, and in fact the examples themselves never used the
// returned string length.
// Example function takes an input integer and input string, and returns
// inputInt + 1, and inputString + ' ' + IntToStr(outputInt). If successful,
// the return result is true, otherwise errorMsgBuffer contains the the
// exception message string.
function DelphiFunction(inputInt : integer;
inputString : PAnsiChar;
out outputInt : integer;
outputStringBufferSize : integer;
var outputStringBuffer : PAnsiChar;
errorMsgBufferSize : integer;
var errorMsgBuffer : PAnsiChar)
: WordBool; stdcall; export;
var s : string;
begin
outputInt := 0;
try
outputInt := inputInt + 1;
s := inputString + ' ' + IntToStr(outputInt);
StrLCopy(outputStringBuffer, PAnsiChar(s), outputStringBufferSize-1);
errorMsgBuffer[0] := #0;
Result := true;
except
on e : exception do
begin
StrLCopy(errorMsgBuffer, PAnsiChar(e.Message), errorMsgBufferSize-1);
Result := false;
end;
end;
end;
// I would have thought having "export" at the end of the function declartion
// (above) would have been enough to export the function, but I couldn't get it
// to work without this line also.
exports DelphiFunction;
begin
end.
C#code:
C# Code:
using System;
using System.Runtime.InteropServices;
namespace CsharpApp
{
class Program
{
// I added DelphiLibrary.dll to my project (NOT in References, but
// "Add existing file"). In Properties for the dll, I set "BuildAction"
// to None, and "Copy to Output Directory" to "Copy always".
// Make sure your Delphi dll has version information included.
[DllImport("DelphiLibrary.dll",
CallingConvention = CallingConvention.StdCall,
CharSet = CharSet.Ansi)]
public static extern bool
DelphiFunction(int inputInt, string inputString,
out int outputInt,
int outputStringBufferSize, ref string outputStringBuffer,
int errorMsgBufferSize, ref string errorMsgBuffer);
static void Main(string[] args)
{
int inputInt = 1;
string inputString = "This is a test";
int outputInt;
const int stringBufferSize = 1024;
var outputStringBuffer = new String('\x00', stringBufferSize);
var errorMsgBuffer = new String('\x00', stringBufferSize);
if (!DelphiFunction(inputInt, inputString,
out outputInt,
stringBufferSize, ref outputStringBuffer,
stringBufferSize, ref errorMsgBuffer))
Console.WriteLine("Error = \"{0}\"", errorMsgBuffer);
else
Console.WriteLine("outputInt = {0}, outputString = \"{1}\"",
outputInt, outputStringBuffer);
Console.Write("Press Enter:");
Console.ReadLine();
}
}
}
这是一个额外的类,它展示了如何动态地加载DLL(对不起排长队):
And here's an additional class that shows how to load the DLL dynamically (sorry for the long lines):
using System;
using System.Runtime.InteropServices;
namespace CsharpApp
{
static class DynamicLinking
{
[DllImport("kernel32.dll", EntryPoint = "LoadLibrary")]
static extern int LoadLibrary([MarshalAs(UnmanagedType.LPStr)] string lpLibFileName);
[DllImport("kernel32.dll", EntryPoint = "GetProcAddress")]
static extern IntPtr GetProcAddress(int hModule, [MarshalAs(UnmanagedType.LPStr)] string lpProcName);
[DllImport("kernel32.dll", EntryPoint = "FreeLibrary")]
static extern bool FreeLibrary(int hModule);
[UnmanagedFunctionPointer(CallingConvention.StdCall, CharSet = CharSet.Ansi)]
delegate bool DelphiFunction(int inputInt, string inputString,
out int outputInt,
int outputStringBufferSize, ref string outputStringBuffer,
int errorMsgBufferSize, ref string errorMsgBuffer);
public static void CallDelphiFunction(int inputInt, string inputString,
out int outputInt, out string outputString)
{
const string dllName = "DelphiLib.dll";
const string functionName = "DelphiFunction";
int libHandle = LoadLibrary(dllName);
if (libHandle == 0)
throw new Exception(string.Format("Could not load library \"{0}\"", dllName));
try
{
var delphiFunctionAddress = GetProcAddress(libHandle, functionName);
if (delphiFunctionAddress == IntPtr.Zero)
throw new Exception(string.Format("Can't find function \"{0}\" in library \"{1}\"", functionName, dllName));
var delphiFunction = (DelphiFunction)Marshal.GetDelegateForFunctionPointer(delphiFunctionAddress, typeof(DelphiFunction));
const int stringBufferSize = 1024;
var outputStringBuffer = new String('\x00', stringBufferSize);
var errorMsgBuffer = new String('\x00', stringBufferSize);
if (!delphiFunction(inputInt, inputString, out outputInt,
stringBufferSize, ref outputStringBuffer,
stringBufferSize, ref errorMsgBuffer))
throw new Exception(errorMsgBuffer);
outputString = outputStringBuffer;
}
finally
{
FreeLibrary(libHandle);
}
}
}
}
-Dan
-Dan
这篇关于从C#.NET应用程序中调用一个Delphi的DLL的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!