首选的charset？ [英] preferred charset?
问题描述
我一直在使用charset windows-1252一段时间了，但最近有人向这个群体中的其他人指出它是b / b
Microsoft创作（我确定我的事实是错误或倾斜）和
因此不适合跨平台浏览。
无论如何，我开始我的恢复的道路（即打破我的成瘾
仅为IE创作）我想知道什么是
首选字符集？
我尝试了一次搜索，只找到了一些巨大的列表，这些列表让我眼花缭乱而没有告诉我使用哪一个完整的
范围的角色并拥有它们显示我打算的方式
讲英语的机器。
我不确定正确的术语，但我总是使用&字符
代替我键盘上没有出现的任何东西，
理想情况下，字符集应该显示那些，对吧？ （例如，如果我想要显示蒙特利尔，我会输入Montr& eacute; al。）
谢谢！
I have been using the charset windows-1252 for a while, but it was
pointed out to someone else in this group recently that it''s a
Microsoft creation (I''m sure I''m getting my facts wrong or skewed) and
therefore not good for cross-platform browsing.
Anyway, I am beginning my road to recovery (ie, breaking my addiction
to authoring only for IE) and I would like to know what is the
preferred charset?
I have tried a search and only find immense lists that make me
cross-eyed without ever telling me which to use to utilize a full
range of characters and have them display the way I intend on
English-speaking machines.
I''m not sure of the proper term, but I always use the & character
substitutes for anything that doesn''t show up on my keyboard so,
ideally, the charset should display those, right? (For instance, if I
want to display Montréal, I would input Montréal.)
Thanks!
推荐答案
Jane Withnolastname< Ja ********************** @ yahoo.com>写道：
Jane Withnolastname <Ja**********************@yahoo.com> wrote:
无论如何，我开始恢复的道路（即，打破我的成瘾
只为IE创作）我想知道什么是
首选charset？
可能是UTF-8。
; K
Anyway, I am beginning my road to recovery (ie, breaking my addiction
to authoring only for IE) and I would like to know what is the
preferred charset?
Probably UTF-8.
;K
2003年8月27日星期三22:13:47 -0500，Mad Bad Rabbit
< ma ********** @ yahoo.com>写道：
On Wed, 27 Aug 2003 22:13:47 -0500, Mad Bad Rabbit
<ma**********@yahoo.com> wrote:
Jane Withnolastname< Ja ********************** @ yahoo.com>写道：
Jane Withnolastname <Ja**********************@yahoo.com> wrote:
无论如何，我开始恢复的道路（即，打破我的成瘾
只为IE创作）我想知道什么是
首选字符集？
Anyway, I am beginning my road to recovery (ie, breaking my addiction
to authoring only for IE) and I would like to know what is the
preferred charset?
可能是UTF-8。
Probably UTF-8.
我刚才尝试过UTF-8（认为是正确的一个）并且返回窗口，因为我得到了奇怪的结果。但是，
现在已经建议了，我已经回到了我有问题的文件，并且看到我使用的是开放和关闭的引号（而不是
键盘上的常规引号）。我不知道他们是怎么进入那里的b $ b因为我真的不得不去寻找我是如何得到的，所以
我必须要复制并粘贴它。
无论如何，这里有一个相关的问题：是否可以将
ASCII码写入html？如上例所示，它将是对于
的公开报价，并且对于近似报价。
这是可接受的，还是有另一种方式，类似于使用& eacute的首选
方法;而不是é？
或者我会更好地建议坚持使用常规报价并且从不
介意特殊的ASCII字符？
而我们在引用...是否可以使用引用键将
放入文件中，或者更好地使用& quot ;?
再次感谢。我现在感觉非常愚蠢:)
P.S.是否有所有替代角色的列表？我会b / b
尝试搜索，但我不知道这些的正确用语。
I tried UTF-8 a while ago (thinking it was the right one) and went
back to the windows one because I got odd results from it. However,
now that you have suggested it, I have gone back to the file I had
problems with and see that I was using open and close quotes (instead
of the regular quotes on the keyboard). I don''t know how they got in
there, because I really had to search to figure out how I got them, so
I must have copy&pasted it.
Anyway, here''s a sorta related question: is it acceptable to write
ASCII codes into html? As in the above example, it would be “ for
the open quote, and ” for the close quote.
Is that acceptable, or is there another way, similar to the preferred
method of using é rather than é?
Or would I be better advised to stick with regular quotes and never
mind special ASCII-only characters?
And while we''re on quotes ... is it acceptable to use the quote key to
put them in a file, or is it better to use "?
Thanks again. I''m feeling quite stupid right now :)
P.S. Is there a list somewhere of all the alternate characters? I''d
try a search, but I don''t know the proper term for these.
Jane Withnolastname< Ja * *********************@yahoo.com>写道：
Jane Withnolastname <Ja**********************@yahoo.com> wrote:
无论如何，这里有一个相关的问题：将ASCII码写入html是否可以接受？如上例所示，它将是for
open quote和for close quote。
如果你宣布代码集是Unicode，那就没有。
除非你使用代码集1252，否则不是双引号。
要查找Unicode中的给定字符，请转到：
http://www.unicode.org/charts/
并查看（例如）General Punctuation"图表。
在Unicode中，您想要的双引号分配
代码&＃x201C;和&＃x201D;
这是可以接受的，还是有另一种方式，类似于使用& eacute的首选方法;而不是é？
好问题：是的。请参阅
http：// www .htmlhelp.com / reference / ht ... s / special.html
您可以使用实体& ldquo;和& rdquo;对于这些角色。
（比数字代码更容易记住）。
P.S.是否有所有替代角色的列表？我会尝试搜索，但我不知道这些的正确用语。
他们被称为HTML实体，上面的网站有列表。
HTH
; K
Anyway, here''s a sorta related question: is it acceptable to write
ASCII codes into html? As in the above example, it would be “ for
the open quote, and ” for the close quote.
Not if you''re declaring the codeset to be Unicode.
“ isn''t a double-quote unless you use codeset 1252.
To find a given character in Unicode, go to:
http://www.unicode.org/charts/
and look at (for example) "General Punctuation" chart.
In Unicode, the double-quotes you want are assigned
codes “ and ”
Is that acceptable, or is there another way, similar
to the preferred method of using é rather than é?
Good question: yes there are. See
http://www.htmlhelp.com/reference/ht...s/special.html
You can use entities “ and ” for these characters.
(which is a lot easier to remember than the numeric codes).
P.S. Is there a list somewhere of all the alternate characters? I''d
try a search, but I don''t know the proper term for these.
They''re called "HTML entities", and the above site has lists.
HTH
;K
这篇关于首选的charset？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
