.NET 2打破了Dantz Retrospect Express HD [英] .NET 2 breaks Dantz Retrospect Express HD
问题描述
一些历史，
我有一个带有Retrospect Express的Maxtor OneTouch II USB 2备份驱动器
HD。
我最近发现Retrospect Express HD在更新状态时挂起。
之前已经发生这种情况，所需要的只是一个干净的
重新安装。
这次，我在Maxtor的知识中发现了几种可能的解决方案
base，特别是答案2352 - 其中指出.NET 1打破了
计划。但是，没有解决问题，请参阅下文。
首先，我卸载并重新安装了Maxtor One Touch和
Retrospect Express HD。没有变化。
接下来，我删除了RBC文件和OneTouch II上的所有其他文件
驱动器并卸载/重新安装了Maxtor和Retrospect Express HD <再次使用
软件。仍然没有用。
然后我安装了Maxtor的补丁WIN_ReXHDOT2_DRVUP.EXE。那不是
帮助。
我根据答案2353重新安装了Microsoft .NET 1.1补丁＃885055。
Retrospect仍然挂起更新状态。
我心不在焉地安装了2.0版的.NET。似乎可能是
嫌疑人。无论是什么，Retrospect Express HD仍然挂在
更新状态点。
我现在该怎么办？
Some history,
I have a Maxtor OneTouch II USB 2 backup drive with Retrospect Express
HD.
I recently found that Retrospect Express HD hangs at Updating Status.
This has happened before, and all that was required was a clean
reinstall.
This time, I found several possible solutions in Maxtor''s knowledge
base, particularily Answer 2352 - which notes that .NET 1 broke the
program. However, none fixed the problem, see below.
First, I uninstalled and reinstalled the Maxtor One Touch and
Retrospect Express HD. No change.
Next, I deleted the RBC file and all other files on the OneTouch II
drive and uninstalled/reinstalled the Maxtor and Retrospect Express HD
software again. Still did not work.
I then installed Maxtor''s patch WIN_ReXHDOT2_DRVUP.EXE. That did not
help.
I reinstalled the Microsoft .NET 1.1 patch #885055, per Answer 2353.
Retrospect still hangs at updating status.
I resently installed version 2.0 of NET. Seems like the likely
suspect. Whatever it is, Retrospect Express HD is still hanging at the
updating status point.
What should I do now?
推荐答案
dotnetfx 1.x和2.0是非常主流的安装。这不太可能是你问题的原因，但这是可能的。听起来像是一个问题
与EMC / Retrospect。期待他们的支持。
-A
< le ***** @ yahoo.com>在消息中写道
新闻：i6 ******************************** @ 4ax.com ...
The dotnetfx 1.x and 2.0 are pretty mainstream installs. It is unlikely this
is the cause of your problem but it is possible. Sounds like it is an issue
with EMC / Retrospect. Look to them for support.
-A
<le*****@yahoo.com> wrote in message
news:i6********************************@4ax.com...
有些历史，我有一个带有Retrospect Express
HD的Maxtor OneTouch II USB 2备份驱动器。
我最近发现了Retrospect Express HD在更新状态时挂起。
之前已经发生了这一切，所需要的只是一个干净的
重新安装。
这一次，我在迈拓找到了几个可能的解决方案''知识
基础，特别是答案2352 - 其中指出.NET 1打破了
程序。但是，没有解决问题，请参阅下文。
首先，我卸载并重新安装了迈拓One Touch和
Retrospect Express HD。没有变化。
接下来，我删除了RBC文件和OneTouch II
驱动器上的所有其他文件，并再次卸载/重新安装了Maxtor和Retrospect Express HD
软件。仍然无法正常工作。
然后我安装了Maxtor的补丁WIN_ReXHDOT2_DRVUP.EXE。这没有帮助。
我根据答案2353重新安装了Microsoft .NET 1.1补丁＃885055。
Retrospect仍然处于更新状态。
我心不在焉地安装了2.0版的.NET。似乎可能是
怀疑。无论是什么，Retrospect Express HD仍然处于
更新状态点。
我现在该怎么办？
Some history,
I have a Maxtor OneTouch II USB 2 backup drive with Retrospect Express
HD.
I recently found that Retrospect Express HD hangs at Updating Status.
This has happened before, and all that was required was a clean
reinstall.
This time, I found several possible solutions in Maxtor''s knowledge
base, particularily Answer 2352 - which notes that .NET 1 broke the
program. However, none fixed the problem, see below.
First, I uninstalled and reinstalled the Maxtor One Touch and
Retrospect Express HD. No change.
Next, I deleted the RBC file and all other files on the OneTouch II
drive and uninstalled/reinstalled the Maxtor and Retrospect Express HD
software again. Still did not work.
I then installed Maxtor''s patch WIN_ReXHDOT2_DRVUP.EXE. That did not
help.
I reinstalled the Microsoft .NET 1.1 patch #885055, per Answer 2353.
Retrospect still hangs at updating status.
I resently installed version 2.0 of NET. Seems like the likely
suspect. Whatever it is, Retrospect Express HD is still hanging at the
updating status point.
What should I do now?
有关.Net
版本2和Retrospect的相同问题的更多报告，请参阅Dantz论坛。
http：/ /forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
See Dantz forums for more reports of the same problems with .Net
version 2 and Retrospect.
http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
很可能存在问题与安装v2.0
框架相关，但你不太可能想出一个修复程序。与EMC交谈，他们将与b
一起工作。
-A
< le ***** @ yahoo.com>在消息中写道
news：n4 ******************************** @ 4ax.com ...
Quite possible that there is an issue related to the install of the v2.0
framework, but you unlikely to come up with a fix. Talk to EMC, they will
have to work with Microsoft.
-A
<le*****@yahoo.com> wrote in message
news:n4********************************@4ax.com...
有关.Net
版本2和Retrospect相同问题的更多报告，请参阅Dantz论坛。
http：/ /forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
这篇关于.NET 2打破了Dantz Retrospect Express HD的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
