MTM在使用跨域配置时将测试控制器显示为脱机。 [英] MTM showing Test Controller as Offline when using Cross Domain configuration.
问题描述
我们有两个不同的域，我们的要求是以某种方式设置TFS，以便TFS服务器能够连接到两个不同域中的系统。这两个域之间没有双向信任。所以我们使用用户
镜像来使用TFS的跨域设置。设置成功但TFS控制器显示为"离线"状态。在MTM。
我已按以下方式设置TFS服务器，测试控制器和测试代理。
系统A（Windows Server 2008）：TFS Server 2010.在域上：XYZ
系统B（Windows XP）：TFS控制器：在域上：ABC。通过镜像用户信息连接到TFS。系统A和系统B上的相同用户。
系统C，D，E :( Windows XP）：TFS代理。在域上：ABC。
由于系统B，C，D，E在同一个域上，因此我使用域用户来验证TFS控制器和TFS代理之间的连接。
我的TFS工作正常，控制器已注册到团队项目，TFS服务器和测试代理也在测试控制器中注册。
当我是在系统B（TFS控制器）上打开MTM，然后控制器是"在线"状态。并且我能够访问在控制器中注册的所有系统，但是当我从任何其他系统（系统C，系统D，系统D或其他系统）打开MTM时，控制器
将显示在"离线"状态。模式。
请建议我采取什么步骤在MTM中的其他机器上制作测试控制器。
< blockquote>
您好0Anshul_Goel0，
感谢您的发帖。
我想让熟悉这个话题的人参与进一步研究这个问题。可能会有一些时间延迟。感谢您的耐心等待。
感谢您的理解和支持。
最诚挚的问候，
Hi,
We have two different domains and our requirement was to setup TFS in a manner so that TFS Server is able to connect to the system in two different domain. There is no two way trust between the two domains. So we used cross domain setup of TFS using user mirroring. The setup was successful but the TFS Controller is getting displayed as "Offline" in MTM.
I have setup TFS Server, Test Controller and Test Agent in the following manner.
System A(Windows Server 2008): TFS Server 2010. On Domain: XYZ
System B(Windows XP): TFS Controller :On Domain: ABC . Connected to TFS by mirroring user info. Same user on System A and System B.
System C, D, E: (Windows XP): TFS Agent. On Domain: ABC.
Since system B, C, D, E are on the same domain, so I used domain users for authenticating the connection between TFS Controller and TFS Agents.
MY TFS is working fine, controller is registered to the team project and TFS server and the test agents are also registered with the Test Controller.
When I am opening MTM on System B(TFS Controller), then the controller is "Online" and I am able to access all the systems registered with the controller but when I am opening MTM from any other system(System C, System D, System D or other) then the controller is getting displayed in "offline" mode.
Please suggest what step should i take to make the test controller on others machines in MTM.
Hi 0Anshul_Goel0,
Thank you for your post.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
这篇关于MTM在使用跨域配置时将测试控制器显示为脱机。的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
