没有从Kinect FPS 0收到深度帧 [英] No depth frame received from Kinect FPS 0
问题描述
我的kinect for windows v2有问题, hen
i启动Kinect v2配置验证程序我得到了这个
在验证Kinect中颜色和深度流"没有从Kinect FPS 0收到深度帧"
在我的设备管理中,我看到:
on the WDF KinectSensor接口0
它表示设备无法启动(代码10)
我的电脑配置是:
Renesas Electronics USB3.0
( 设备驱动程序2.1.27 )
显卡 NVIDIA GeForce GT 525m
Windows 8.1 Pro
处理器Intel(R)Core(TM)i5-2410M CPU @ 2.30 GHz 2.30
GHz
OS 64 bit
RAM 8GB
我更新了所有的驱动程序,我看到了集线器上的灯,但没有点亮kinect。
我不知道为什么我的设备无法启动。
如何解决这个问题?
谢谢。
Gefore 5xxM芯片组那时的一些系统连接了usb3主机控制器连接到PCIx v1总线,不支持Kinect v2所需的"SuperSpeed"(5.0GB / s)。您可以看到确认系统可以支持的步骤:
https://social.msdn.microsoft.com/Forums/en-US/6e206f90-1c3d-4611-ac95-a3e7391461b7/issue-with-supported-usb-30-hostcontroller?forum= kinectv2sdk
Hi,
I have a problem with my kinect for windows v2, when i launch Kinect v2 Configuration Verifier I get this
In Verify Kinect Color and Depth Stream "No depth frame received from Kinect FPS 0"
On my device management i see :
on the WDF KinectSensor Interface 0
it says device can't start (code 10)
My computer configuration is :
Renesas Electronics USB3.0 (device driver 2.1.27)
Graphic card NVIDIA GeForce GT 525m
Windows 8.1 Pro
Processor Intel(R) Core(TM) i5-2410M CPU @ 2.30 GHz 2.30 GHz
OS 64 bit
RAM 8GB
I updated all drivers, I see light on the hub but no light on the kinect.
I don't know why my device can't start.
How do I solve this problem?
Thanks.
some systems around that time of the Gefore 5xxM chipsets had connected the usb3 host controller to the PCIx v1 bus which does not support the "SuperSpeed" (5.0GB/s) required for Kinect v2. You can see steps to confirm what your system can support:
https://social.msdn.microsoft.com/Forums/en-US/6e206f90-1c3d-4611-ac95-a3e7391461b7/issue-with-supported-usb-30-hostcontroller?forum=kinectv2sdk
这篇关于没有从Kinect FPS 0收到深度帧的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!