Kinect Pb深度和流颜色（WDF KinectSensor接口0） [英] Kinect Pb depth ans streams color (WDF KinectSensor Interface 0)
问题描述
我的英语很差，但我会尝试解释我的问题。
我把kinect认识得很好以后我做了kinect v2配置验证器验证阶段除了最后一阶段：
验证kinect深度和颜色流
检测深度和颜色流延迟
结果：没有从kinect收到的深度帧
FPS ：0
和2个黑屏。
然后在环外设中：
WDF KinectSensor接口0呈现驱动程序级别的问题。
WDF KinectSensor接口0的驱动程序级别存在问题。必须重新安装驱动程序。
我做了什么却没有结果。
有关环外设的信息：
| Nom： | WDF KinectSensor接口0 |
|---|---|
| USB \VID_045E& PID_02C4& MI_00\8& 39E64BF3& 2& 0000 | |
| Code d'erreur： | 10 |
WDF KinectSensor接口0的驱动程序级别存在问题。重新安装驱动程序可以解决此问题。
问题在于环外设的水平PnP
某些环外设PnP的级别存在问题。 Windows将采取额外措施来解决这些问题。
在环外设管理员，我有kinect传感器设备和向下我有wdf kinectsensor接口0有一个三角形和一个感叹号，它的属性和环'
外设我有：
此环外设无法启动。 （代码10）{操作失败}
想要的操作未能圆满结束。
这是我尝试过的一切，我卸载，重新安装，更新了我的所有驱动程序以及Windows，没有任何步行（步骤）。
我指定我有Windows 8.1专业版，我有一个xeon firepro w8000,2 e5 2620，一位母亲使用控制器瑞萨的usb 3.0。
我很好地连接了kinect与适配器Windows一起点亮白色，另一方面kinect没有点亮（打开）。
感谢您的帮助，我不太了解它发生了什么。
你需要拥有至少一个英特尔或瑞萨USB3芯片组，内部连接到主板的PCI Express Gen 2.0总线。如果设备无法加载驱动程序，您将收到所描述的问题。有关解决的一些
步骤，请参阅故障排除指南：
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues -guide？论坛= kinectv2sdk
My English is pretty poor, but I am going to try to explain my problem .
I connected my kinect recognized well later I make the kinect v2 configuration verifier all the stages are validated except the last one:
Verify kinect depth and color streams
Detects depth and color stream latency
results : No depth frames received from kinect
FPS : 0
And 2 black screens.
Then in ring peripherals :
WDF KinectSensor Interface 0 presents a problem at the level of the driver.
There is a problem at the level of the driver of WDF KinectSensor Interface 0. The driver must be reinstalled.
What I made but without result.
Information on the ring peripheral :
| Nom: | WDF KinectSensor Interface 0 |
|---|---|
| ID: | USB\VID_045E&PID_02C4&MI_00\8&39E64BF3&2&0000 |
| Code d’erreur: | 10 |
There is a problem at the level of the driver of WDF KinectSensor Interface 0. The reinstallation of the driver can solve this problem.
Problem at the level of ring peripherals PnP
There are problems at the level of certain ring peripherals PnP. Windows is going to take additional measures to solve these problems.
In the administrator of ring peripheral, I have kinect sensor devices and down I have wdf kinectsensor interface 0 with a triangle and an exclamation mark,its properties and in etat of the ring peripheral I have:
This ring peripheral cannot start. (Code 10) {The operation failed}
The wanted operation was not able to be brought to a successful conclusion.
Here is I tried everything, I uninstalled, reinstalled, updated all my drivers as well as Windows, nothing of walking(step).
I specify that I have Windows 8.1 pro, I have a xeon firepro w8000, 2 e5 2620, a cardmother with usb 3.0 with the controller renesas.
I connected well the kinect with the adapter Windows, it ignites in white on the other hand the kinect has no light of lit(switched on).
Here is thank you for your help, the I do not understand too much what it takes place.
You need to have a least an Intel or Renesas USB3 chipset that is internally connected to the PCI Express Gen 2.0 bus of the motherboard. If the device cannot load the driver you will get the issue you have described. See troubleshooting guide for some steps to resolve: https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
这篇关于Kinect Pb深度和流颜色（WDF KinectSensor接口0）的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
