Microsoft Lifecam 1.0 USB20驱动程序问题 [英] Microsoft Lifecam 1.0 USB20 Drivers Problem

问题描述

尊敬的主持人/朋友

我的台式电脑配有P-IV处理器，256 MB RAM，带有SP2的Windows XP专业版。

I  have Desktop PC with P-IV Processor, 256 MB RAM, Windows XP Pro with SP2.

最近，我的亲戚给我发了一张带有软件光盘的Microsoft LifeWeb Camera 1.0。

Recently my relative send me a Microsoft LifeWeb Camera 1.0 with Software CD.

根据指南，我安装了第一个软件。根据安装程序，我在安装软件后将Web Cam连接到USB端口。然后它开始寻找我的驱动程序文件。（inf）。我展示了cd路径，Driver32 ---> Vx6000和Driver32 - > Vx3000文件夹也。但它告诉它不是正确的文件。因此，我的摄像头不起作用。我搜索了这个表格，每个人都告诉他们用XP他们的相机没有任何问题。

As per the guide lines I installed the softwareware 1st.  As per installation procedure I connected the Web Cam to the USB Port after installing the software.  Then it started hunting me for driver files.(inf).   I shown the cd path, Driver32---> Vx6000   and Driver32 --> Vx3000 folders also.    But it is telling that it is not the correct file.  And hence, my cam is not working.  I searched this form and everybody telling that with XP their cam's are working fine without any problem.   

但是我的Microsoft Lifecam 1.0出现了安装驱动程序问题。后来我从网站上下载了Microsfot Lifecam 1.3（最新版本）并安装了新软件。结果是一样的。我在Microsft硬件站点上也发现了一些更新。我也试过那个。没有积极的回应。每当我启动电脑时，我的摄像头都会询问驱动程序文件。我完全卸载了软件并重新安装。没有用。

But I am getting installation driver problem for my Microsoft Lifecam 1.0.   Later I have downloaded Microsfot Lifecam 1.3 (Latest Version) from site and installed the new software.   Result is same.   I found some updates also on the Microsft Hardware site.   I tried with that one also.  No positive responce.    My cam is asking for driver files whenever i started my pc.    I totally un-installed the software and re-installed.  No Use.

我也根据网站信息卸载了USB控制器。重新启动电脑。重新安装软件。但我的凸轮不起作用。要求USB20相机驱动文件。当我将凸轮放入USB端口时，电脑正在识别硬件。并要求驱动程序文件。当我显示cdrom或最近下载的软件（1.3）文件夹时，它说它们不是正确的文件。该怎么办？

I uninstalled the USB Controller also as per site information.   Re-started the pc.  Re-installed the software.    But my cam is not working.   Asking for USB20 Camera driver files.   When I put the cam into usb port the pc is recognising the hardware.   And asking for driver files.   when i show the cdrom OR recently downloaded software(1.3) files folder it is saying that they are not the correct files.   What to do ?

我请求大家指导我让我的凸轮工作。最迫切请帮帮我。

I request you all please guide me to get my cam work.  It is most urgent please help me.

提前致谢。

我再次请求你们请帮助我。

Once again I request you all please help me.

问候

PS Prasad

PS Prasad

印度AP州。

[e-mail] - 请建议我的相机如何工作。

[e-mail]      -- Please suggest me how my cam can work.

推荐答案

我昨天买了我的VX-3000并遇到了完全相同的问题。
还运行Vista我可能会添加。

我下载了1.3软件马上和安装后（我选择不安装Live Messenger软件，因为我不使用它）它告诉我最后插入相机，所以我做了。
然后它说了一些关于INF的事情档案小姐在相机上的部分，所以它将无法正确安装。

这是非常烦人的。首先，我购买了一个Creative Livecam Vista，其中只有Vista的beta驱动程序存在，根本无法安装，然后这个驱动程序无法正常工作。

如果只有Logitech为我的7或8年创建了Vista驱动程序以前一直工作的旧QuickCam Pro :-(

I bought my VX-3000 just yesterday and running into the exact same problems.
Also running Vista I might add.

I downloaded the 1.3 software right away and after installing it (I choose not to install the Live Messenger software as I don't use it) it told me at the end to plug in the camera, so I did.
Then it said something about the INF file missing the section on the camera, so it won't install properly.

This is getting quite annoying. First I bought a Creative Livecam Vista which only a beta driver for Vista exists which won't install at all, then this driver which won't work.

If only Logitech created Vista drivers for my 7 or 8 year old QuickCam Pro which always worked before :-(

这篇关于Microsoft Lifecam 1.0 USB20驱动程序问题的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！