adb devices命令未显示我的xperia z-拥有正确的驱动程序和所有驱动程序 [英] adb devices command doesn't show my xperia z - got proper drivers and all
问题描述
我正在尝试刷新自定义rom，因此我需要运行某些adb命令。现在的事情是，当我启动快速启动后，一切都好了，
I am trying to flash a custom rom and therefore I need to run certain adb commands. Now the thing is the when I'm booted in to fastboot everything is okay, the
fastboot devices
命令可以识别我的手机（C6603）。该设备也显示为Android设备-设备管理器中的sony fastboot界面。但是，如果我尝试运行
command recognizes my phone(C6603). Also the device is shown as an Android device - sony fastboot interface in the device manager. But if I try to run
adb devices
命令未找到设备。
我对这里有些绝望，但我还是有些其他信息/事ve尝试过：
I'm kind of hopeless here is/are some additional info/things I've tried:
- 我在整个Kingo根目录中闪烁，并且我使用的固件是.74
- USB调试当然是在
- 我尝试了媒体传输和大容量存储
- 我尝试了不同的USB端口并多次重启adb
- 我尝试将设备ID添加到adb_usb.ini。尽管我不确定我的设备ID
- 我使用Flashtool安装了用于快速启动设备的驱动程序，还安装了fasbtboot和ADT驱动程序。
- 我使用的是Windows 8（x64）
- I flashed throughout Kingo root and I'm on firmware .74
- USB debugging is, of course, on
- I tried both media transfer and mass storage
- I tried different usb ports and rebooting adb several times
- I tried adding the device id to adb_usb.ini. Though I'm not sure about my device id
- I installed the drivers with for the 'fastboot device' with Flashtool and also installed fasbtboot and ADT drivers.
- I'm on Windows 8(x64)
我希望有人可以帮助我。否则，我应该把ADB Wireless作为我的最后选择
I hope someone can help me out. Otherwise I should consider ADB Wireless as my last option
谢谢！
推荐答案
如果其他任何人仍在寻找解决方案，那么这对我有用：
In case anyone else is still looking for a solution, this worked for me:
从此处 http://developer.sonymobile.com/downloads/drivers/
打开设备管理器，检查您的设备名称（例如C6903）是否在其他设备下列出。如果是这样，请右键单击它并选择更新驱动程序，然后使用刚下载的驱动程序。完成！
Open the device manager, check whether your device name (e.g. C6903) is listed under "Other devices". If so, right click on it and select "update drivers", and use the ones you just downloaded. Done!
问题在于，在手机上启用USB调试后，设备会作为两个单独的设备连接，而Windows无法识别调试设备。因此，我不得不手动安装适当的驱动程序。
The problem is that the device connects as two separate devices when usb debugging is enabled on the phone, and windows didn't recognize the "debugging device". So I had to install the appropriate drivers manually.
这篇关于adb devices命令未显示我的xperia z-拥有正确的驱动程序和所有驱动程序的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
