如何创建.csv文件? [英] How can i create a file .csv?
本文介绍了如何创建.csv文件?的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我如何创建文件.csv ?，我只想创建一个文件，因为我想在main()之外声明我的文件.我也有一个函数，还有de main()函数.
How i can create a file .csv?, i want to create only a file, because i want to declare outside the main() my File. as well i have a functions, and de main() function.
我是这样的: https://www.tcpdump.org/sniffex.c 我想在文件.csv中写入一些打印内容，例如ip，tcp等.
my is this: https://www.tcpdump.org/sniffex.c i want to write in my file .csv some prints, for example the ip, tcp, etc.
#define APP_NAME "sniffex"
#define APP_DESC "Sniffer example using libpcap"
#define APP_COPYRIGHT "Copyright (c) 2005 The Tcpdump Group"
#define APP_DISCLAIMER "THERE IS ABSOLUTELY NO WARRANTY FOR THIS PROGRAM."
#include <pcap.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
/* default snap length (maximum bytes per packet to capture) */
#define SNAP_LEN 1518
/* ethernet headers are always exactly 14 bytes [1] */
#define SIZE_ETHERNET 14
/* Ethernet addresses are 6 bytes */
#define ETHER_ADDR_LEN 6
FILE *f = fopen("test", "w");
/* Ethernet header */
struct sniff_ethernet {
u_char ether_dhost[ETHER_ADDR_LEN]; /* destination host address */
u_char ether_shost[ETHER_ADDR_LEN]; /* source host address */
u_short ether_type; /* IP? ARP? RARP? etc */
};
/* IP header */
struct sniff_ip {
u_char ip_vhl; /* version << 4 | header length >> 2 */
u_char ip_tos; /* type of service */
u_short ip_len; /* total length */
u_short ip_id; /* identification */
u_short ip_off; /* fragment offset field */
#define IP_RF 0x8000 /* reserved fragment flag */
#define IP_DF 0x4000 /* dont fragment flag */
#define IP_MF 0x2000 /* more fragments flag */
#define IP_OFFMASK 0x1fff /* mask for fragmenting bits */
u_char ip_ttl; /* time to live */
u_char ip_p; /* protocol */
u_short ip_sum; /* checksum */
struct in_addr ip_src,ip_dst; /* source and dest address */
};
#define IP_HL(ip) (((ip)->ip_vhl) & 0x0f)
#define IP_V(ip) (((ip)->ip_vhl) >> 4)
/* TCP header */
typedef u_int tcp_seq;
struct sniff_tcp {
u_short th_sport; /* source port */
u_short th_dport; /* destination port */
tcp_seq th_seq; /* sequence number */
tcp_seq th_ack; /* acknowledgement number */
u_char th_offx2; /* data offset, rsvd */
#define TH_OFF(th) (((th)->th_offx2 & 0xf0) >> 4)
u_char th_flags;
#define TH_FIN 0x01
#define TH_SYN 0x02
#define TH_RST 0x04
#define TH_PUSH 0x08
#define TH_ACK 0x10
#define TH_URG 0x20
#define TH_ECE 0x40
#define TH_CWR 0x80
#define TH_FLAGS (TH_FIN|TH_SYN|TH_RST|TH_ACK|TH_URG|TH_ECE|TH_CWR)
u_short th_win; /* window */
u_short th_sum; /* checksum */
u_short th_urp; /* urgent pointer */
};
void
got_packet(u_char *args, const struct pcap_pkthdr *header, const u_char *packet);
void
print_payload(const u_char *payload, int len);
void
print_hex_ascii_line(const u_char *payload, int len, int offset);
void
print_app_banner(void);
void
print_app_usage(void);
/*
* app name/banner
*/
void
print_app_banner(void)
{
printf("%s - %s\n", APP_NAME, APP_DESC);
printf("%s\n", APP_COPYRIGHT);
printf("%s\n", APP_DISCLAIMER);
printf("\n");
return;
}
/*
* print help text
*/
void
print_app_usage(void)
{
printf("Usage: %s [interface]\n", APP_NAME);
printf("\n");
printf("Options:\n");
printf(" interface Listen on <interface> for packets.\n");
printf("\n");
return;
}
/*
* print data in rows of 16 bytes: offset hex ascii
*
* 00000 47 45 54 20 2f 20 48 54 54 50 2f 31 2e 31 0d 0a GET / HTTP/1.1..
*/
void
print_hex_ascii_line(const u_char *payload, int len, int offset)
{
int i;
int gap;
const u_char *ch;
/* offset */
printf("%05d ", offset);
/* hex */
ch = payload;
for(i = 0; i < len; i++) {
printf("%02x ", *ch);
ch++;
/* print extra space after 8th byte for visual aid */
if (i == 7)
printf(" ");
}
/* print space to handle line less than 8 bytes */
if (len < 8)
printf(" ");
/* fill hex gap with spaces if not full line */
if (len < 16) {
gap = 16 - len;
for (i = 0; i < gap; i++) {
printf(" ");
}
}
printf(" ");
/* ascii (if printable) */
ch = payload;
for(i = 0; i < len; i++) {
if (isprint(*ch))
printf("%c", *ch);
else
printf(".");
ch++;
}
printf("\n");
return;
}
/*
* print packet payload data (avoid printing binary data)
*/
void
print_payload(const u_char *payload, int len)
{
int len_rem = len;
int line_width = 16; /* number of bytes per line */
int line_len;
int offset = 0; /* zero-based offset counter */
const u_char *ch = payload;
if (len <= 0)
return;
/* data fits on one line */
if (len <= line_width) {
print_hex_ascii_line(ch, len, offset);
return;
}
/* data spans multiple lines */
for ( ;; ) {
/* compute current line length */
line_len = line_width % len_rem;
/* print line */
print_hex_ascii_line(ch, line_len, offset);
/* compute total remaining */
len_rem = len_rem - line_len;
/* shift pointer to remaining bytes to print */
ch = ch + line_len;
/* add offset */
offset = offset + line_width;
/* check if we have line width chars or less */
if (len_rem <= line_width) {
/* print last line and get out */
print_hex_ascii_line(ch, len_rem, offset);
break;
}
}
return;
}
/*
* dissect/print packet
*/
void
got_packet(u_char *args, const struct pcap_pkthdr *header, const u_char *packet)
{
static int count = 1; /* packet counter */
/* declare pointers to packet headers */
const struct sniff_ethernet *ethernet; /* The ethernet header [1] */
const struct sniff_ip *ip; /* The IP header */
const struct sniff_tcp *tcp; /* The TCP header */
const char *payload; /* Packet payload */
int size_ip;
int size_tcp;
int size_payload;
printf("\nPacket number %d:\n", count);
count++;
/* define ethernet header */
ethernet = (struct sniff_ethernet*)(packet);
/* define/compute ip header offset */
ip = (struct sniff_ip*)(packet + SIZE_ETHERNET);
size_ip = IP_HL(ip)*4;
if (size_ip < 20) {
printf(" * Invalid IP header length: %u bytes\n", size_ip);
return;
}
/* print source and destination IP addresses */
printf(" From: %s\n", inet_ntoa(ip->ip_src));
printf(" To: %s\n", inet_ntoa(ip->ip_dst));
/* determine protocol */
switch(ip->ip_p) {
case IPPROTO_TCP:
printf(" Protocol: TCP\n");
break;
case IPPROTO_UDP:
printf(" Protocol: UDP\n");
return;
case IPPROTO_ICMP:
printf(" Protocol: ICMP\n");
return;
case IPPROTO_IP:
printf(" Protocol: IP\n");
return;
default:
printf(" Protocol: unknown\n");
return;
}
/*
* OK, this packet is TCP.
*/
/* define/compute tcp header offset */
tcp = (struct sniff_tcp*)(packet + SIZE_ETHERNET + size_ip);
size_tcp = TH_OFF(tcp)*4;
if (size_tcp < 20) {
printf(" * Invalid TCP header length: %u bytes\n", size_tcp);
return;
}
printf(" Src port: %d\n", ntohs(tcp->th_sport));
printf(" Dst port: %d\n", ntohs(tcp->th_dport));
/* define/compute tcp payload (segment) offset */
payload = (u_char *)(packet + SIZE_ETHERNET + size_ip + size_tcp);
/* compute tcp payload (segment) size */
size_payload = ntohs(ip->ip_len) - (size_ip + size_tcp);
/*
* Print payload data; it might be binary, so don't just
* treat it as a string.
*/
if (size_payload > 0) {
printf(" Payload (%d bytes):\n", size_payload);
print_payload(payload, size_payload);
}
return;
}
int main(int argc, char **argv)
{
char *dev = NULL; /* capture device name */
char errbuf[PCAP_ERRBUF_SIZE]; /* error buffer */
pcap_t *handle; /* packet capture handle */
char filter_exp[] = "ip"; /* filter expression [3] */
struct bpf_program fp; /* compiled filter program (expression) */
bpf_u_int32 mask; /* subnet mask */
bpf_u_int32 net; /* ip */
int num_packets = 10; /* number of packets to capture */
print_app_banner();
/* check for capture device name on command-line */
if (argc == 2) {
dev = argv[1];
}
else if (argc > 2) {
fprintf(stderr, "error: unrecognized command-line options\n\n");
print_app_usage();
exit(EXIT_FAILURE);
}
else {
/* find a capture device if not specified on command-line */
dev = pcap_lookupdev(errbuf);
if (dev == NULL) {
fprintf(stderr, "Couldn't find default device: %s\n",
errbuf);
exit(EXIT_FAILURE);
}
}
/* get network number and mask associated with capture device */
if (pcap_lookupnet(dev, &net, &mask, errbuf) == -1) {
fprintf(stderr, "Couldn't get netmask for device %s: %s\n",
dev, errbuf);
net = 0;
mask = 0;
}
/* print capture info */
printf("Device: %s\n", dev);
printf("Number of packets: %d\n", num_packets);
printf("Filter expression: %s\n", filter_exp);
/* open capture device */
handle = pcap_open_live(dev, SNAP_LEN, 1, 1000, errbuf);
if (handle == NULL) {
fprintf(stderr, "Couldn't open device %s: %s\n", dev, errbuf);
exit(EXIT_FAILURE);
}
/* make sure we're capturing on an Ethernet device [2] */
if (pcap_datalink(handle) != DLT_EN10MB) {
fprintf(stderr, "%s is not an Ethernet\n", dev);
exit(EXIT_FAILURE);
}
/* compile the filter expression */
if (pcap_compile(handle, &fp, filter_exp, 0, net) == -1) {
fprintf(stderr, "Couldn't parse filter %s: %s\n",
filter_exp, pcap_geterr(handle));
exit(EXIT_FAILURE);
}
/* apply the compiled filter */
if (pcap_setfilter(handle, &fp) == -1) {
fprintf(stderr, "Couldn't install filter %s: %s\n",
filter_exp, pcap_geterr(handle));
exit(EXIT_FAILURE);
}
/* now we can set our callback function */
pcap_loop(handle, num_packets, got_packet, NULL);
/* cleanup */
pcap_freecode(&fp);
pcap_close(handle);
printf("\nCapture complete.\n");
return 0;
}
但是我得到了这个错误:
but i got this error:
error: initializer element is not constant
FILE *f = fopen("test", "w");
推荐答案
如果要将结果写入文件中，请移动
If you want to write the results in a file, move
FILE *f = fopen("test", "w");
到main()函数中(也要检查返回值，因为该函数可能会失败)，如果您希望文件格式为csv，则应添加扩展名.csv，以便其他人知道它具有该格式，例如"test.csv"而不是"test".将文件指针传递到需要写入csv文件的所有函数.
into your main() function (also check return value since the function can fail), if you want the file format to be csv then you should add the extension .csv so that other people know it has that format e.g. "test.csv" instead of "test". pass the file pointer to all the functions where you need to write to the csv-file.
现在要序列化收集到的内容，并且由于csv文件的格式是基于行的，因此您需要在编写信息之前先收集信息(这样比较容易).因此，请确定一个结构，该结构将包含要放入csv文件中的所有信息并填充该结构，并具有在收集信息时创建的这些结构的链表，然后在完成收集后，遍历该列表，并为每个结构在csv文件中写一行.
Now to serialize the contents that you have collected and since the format of a csv-file is row based you need to collect the information before you write it (easier that way). So decide on a structure that will contain all the information you want to put in a row in the csv-file and fill that structure, have a linked list of these structures that you create as you are gathering information, then once you are done collecting, go through the list and write one row to the csv-file per structure.
例如
typedef struct CsvRow
{
char ipLocal[32];
char ipRemote[32];
...
struct csvRow* next;
} Csvrow;
CsvRow* first;
CsvRow* last;
// collecting
CsvRow* newLine = malloc(sizeof(CsvRow));
newLine->next = NULL;
if (last == NULL)
{
first = last = newLine;
}
else
{
last->next = newLine;
last = newLine;
}
// then when you are gathering information just add that in last
strcpy(last->ipLocal, "someip");
..
// at the end of your main function do
FILE* fp = fopen("test.csv", "w");
if (fp == NULL)
{
fprintf(stderr, "file access denied");
abort();
}
for (CsvRow* p = first; p != NULL; p = p->next)
{
fprintf(fp, "%s,%s\n", p->ipLocal, p->ipRemote);
}
fclose(fp);
// free memory
CsvRow* q = first;
while (q != NULL)
{
CsvRow* next = q->next;
free(q);
q = next;
}
这篇关于如何创建.csv文件?的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
