使用UnivariateSpline紧密拟合数据 [英] Use UnivariateSpline to fit data tightly

问题描述

我有一堆表示S型函数的x，y点:

I have a bunch of x, y points that represent a sigmoidal function:

x=[ 1.00094909  1.08787635  1.17481363  1.2617564   1.34867881  1.43562284
  1.52259341  1.609522    1.69631283  1.78276102  1.86426648  1.92896789
  1.9464453   1.94941586  2.00062852  2.073691    2.14982808  2.22808316
  2.30634034  2.38456905  2.46280126  2.54106611  2.6193345   2.69748825]
y=[-0.10057627 -0.10172142 -0.10320428 -0.10378959 -0.10348456 -0.10312503
 -0.10276956 -0.10170055 -0.09778279 -0.08608644 -0.05797392  0.00063599
  0.08732999  0.16429878  0.2223306   0.25368884  0.26830932  0.27313931
  0.27308756  0.27048902  0.26626313  0.26139534  0.25634544  0.2509893 ]

我使用scipy.interpolate.UnivariateSpline()来拟合某些三次样条线，如下所示:

I use scipy.interpolate.UnivariateSpline() to fit to some cubic spline as follows:

from scipy.interpolate import UnivariateSpline
s = UnivariateSpline(x, y, k=3, s=0)

xfit = np.linspace(x.min(), x.max(), 200)
plt.scatter(x,y)
plt.plot(xfit, s(xfit))
plt.show()

这就是我得到的:

由于我指定了s=0，因此样条曲线完全附着在数据上，但是摆动太多.使用较高的k值会导致更多的摆动.

Since I specify s=0, the spline adheres completely to the data, but there are too many wiggles. Using a higher k value leads to even more wiggles.

所以我的问题是-

1. 我应该如何正确使用scipy.interpolate.UnivariateSpline()来容纳我的数据?更准确地说，如何使样条曲线的摆动最小化?
2. 对于这种S型功能，这是否是正确的选择?我应该使用scipy.optimize.curve_fit()之类的功能代替tanh(x)试用功能吗?

1. How should I correctly use scipy.interpolate.UnivariateSpline() to fit my data? More precisely, how do I make the spline minimise its wiggling?
2. Is this even the correct choice for this kind of a sigmoidal function? Should I be using something like scipy.optimize.curve_fit() with a trial tanh(x) function instead?

推荐答案

这说明了将两半数据拟合到不同函数的结果，下半部分适合所有数据，且X <2.0和X> = 1.9的所有数据的上半部分，以使拟合曲线的数据重叠.代码在重叠区域X = 1.95的中心从一个方程式切换到另一个方程式.

This illustrates the result of fitting two halves of the data to different functions, the lower half to all data with X < 2.0 and the upper half to all data with X >= 1.9, so that there is overlap in the data for the fitted curves. The code switches from one equation to another at the center of the overlap region, X = 1.95.

import numpy, matplotlib
import matplotlib.pyplot as plt

xData=numpy.array([ 1.00094909,  1.08787635,  1.17481363,  1.2617564,   1.34867881,  1.43562284,
  1.52259341,  1.609522,    1.69631283,  1.78276102,  1.86426648,  1.92896789,
  1.9464453,   1.94941586,  2.00062852,  2.073691,    2.14982808,  2.22808316,
  2.30634034,  2.38456905,  2.46280126,  2.54106611,  2.6193345,   2.69748825])
yData=numpy.array([-0.10057627, -0.10172142, -0.10320428, -0.10378959, -0.10348456, -0.10312503,
 -0.10276956, -0.10170055, -0.09778279, -0.08608644, -0.05797392,  0.00063599,
  0.08732999,  0.16429878,  0.2223306,   0.25368884,  0.26830932,  0.27313931,
  0.27308756,  0.27048902,  0.26626313,  0.26139534,  0.25634544,  0.2509893 ])


# function for x < 1.95 (fitted up to 2.0 for overlap)
def lowerFunc(x_in): # Bleasdale-Nelder Power With Offset
    # coefficients
    a = -1.1431476643503597E+03
    b = 3.3819340844164983E+21
    c = -6.3633178925040745E+01
    d = 3.1481973843740194E+00
    Offset = -1.0300724909782859E-01

    temp = numpy.power(a + b * numpy.power(x_in, c), -1.0 / d)
    temp += Offset
    return temp

# function for x >= 1.95 (fitted down to 1.9 for overlap)
def upperFunc(x_in): # rational equation with Offset
    # coefficients
    a = -2.5294212380048242E-01
    b = 1.4262697377369586E+00
    c = -2.6141935706529118E-01
    d = -8.8730045918252121E-02
    Offset = -4.8283287597672708E-01

    temp = (a * numpy.power(x_in, 2) + b * numpy.log(x_in)) # numerator
    temp /= (1.0 + c * numpy.power(numpy.log(x_in), -1) + d * numpy.exp(x_in)) # denominator
    temp += Offset
    return temp


def combinedFunc(x_in):
    returnVal = []
    for x in x_in:
        if x < 1.95:
            returnVal.append(lowerFunc(x))
        else:
            returnVal.append(upperFunc(x))
    return returnVal


modelPredictions = combinedFunc(xData) 

absError = modelPredictions - yData

SE = numpy.square(absError) # squared errors
MSE = numpy.mean(SE) # mean squared errors
RMSE = numpy.sqrt(MSE) # Root Mean Squared Error, RMSE
Rsquared = 1.0 - (numpy.var(absError) / numpy.var(yData))
print('RMSE:', RMSE)
print('R-squared:', Rsquared)


##########################################################
# graphics output section
def ModelAndScatterPlot(graphWidth, graphHeight):
    f = plt.figure(figsize=(graphWidth/100.0, graphHeight/100.0), dpi=100)
    axes = f.add_subplot(111)

    # first the raw data as a scatter plot
    axes.plot(xData, yData,  'D')

    # create data for the fitted equation plot
    xModel = numpy.linspace(min(xData), max(xData))
    yModel = combinedFunc(xModel)

    # now the model as a line plot
    axes.plot(xModel, yModel)

    axes.set_xlabel('X Data') # X axis data label
    axes.set_ylabel('Y Data') # Y axis data label

    plt.show()
    plt.close('all') # clean up after using pyplot

graphWidth = 800
graphHeight = 600
ModelAndScatterPlot(graphWidth, graphHeight)

这篇关于使用UnivariateSpline紧密拟合数据的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！