如何使用 C/C++ 在 Windows 7 中使麦克风静音? [英] How to mute microphone in Windows 7 with C/C++?

问题描述

我制作了一个使用 WinAPI 使麦克风静音的程序，它似乎在 Windows XP 中完美运行，但在 Windows 7 中不起作用.是否可以在 Windows 7 中使用 WinAPI 控制麦克风音量或静音?

void setVolume(DWORD volume) {HMIXER 混合器；if (mixerOpen(&mixer, 0, 0, 0, 0) != MMSYSERR_NOERROR) {MessageBoxW(NULL, L"错误:mixerOpen()", NULL, MB_ICONHAND);返回;}//获取线路信息MIXERC​​APS 混合盖；MIXERLINE 混合器线；混合器GetDevCaps(0, &mixcaps, sizeof(MIXERC​​APS));MixerLine.cbStruct = sizeof(MIXERLINE);MixerLine.dw​​ComponentType = MIXERLINE_COMPONENTTYPE_DST_WAVEIN;混合器线.dwSource = 0;MixerLine.dw​​Destination = 0;if (mixerGetLineInfo(reinterpret_cast(mixer), &mixerLine, MIXER_GETLINEINFOF_SOURCE)!= MMSYSERR_NOERROR) {MessageBoxW(NULL, L"错误:mixerGetLineInfo()", NULL, MB_ICONHAND);返回;}//获取mixerline的控制权MIXERC​​ONTROL 混音器Ctrl；MIXERLINECONTROLSMixerLineCtrl.cbStruct = sizeof(MIXERLINECONTROLS);MixerLineCtrl.dwLineID=mixerLine.dw​​LineID;mixLineCtrl.dwControlType = MIXERC​​ONTROL_CONTROLTYPE_VOLUME;混合器LineCtrl.cControls = 1;MixerLineCtrl.pamxctrl = &mixerCtrl;MixerLineCtrl.cbmxctrl = sizeof(MIXERC​​ONTROL);混合器LineCtrl.cControls = 5;if (mixerGetLineControls(reinterpret_cast(mixer), &mixerLineCtrl, MIXER_GETLINECONTROLSF_ONEBYTYPE)!= MMSYSERR_NOERROR) {MessageBoxW(NULL, L"错误:mixerGetLineControls()", NULL, MB_ICONHAND);返回;}//体积..MIXERC​​ONTROLDETAILS MixerCtrlDetails;MIXERC​​ONTROLDETAILS_UNSIGNED 混合器CtrlDetailsUnsigned;MixerCtrlDetailsUnsigned.dwValue = 音量；混音器CtrlDetails.dwControlID =混音器Ctrl.dwControlID；MixerCtrlDetails.cbStruct = sizeof(MIXERC​​ONTROLDETAILS);混合器CtrlDetails.cMultipleItems = 0;MixerCtrlDetails.paDetails = &mixerCtrlDetailsUnsigned;MixerCtrlDetails.cbDetails = sizeof(MIXERC​​ONTROLDETAILS_UNSIGNED);混合器CtrlDetails.cChannels = 1;if (mixerSetControlDetails(reinterpret_cast(mixer), &mixerCtrlDetails, MIXER_OBJECTF_HMIXER | MIXER_GETCONTROLDETAILSF_VALUE)!= MMSYSERR_NOERROR) {MessageBoxW(NULL, L"错误:mixerSetControlDetails()", NULL, MB_ICONHAND);返回;}混合器关闭(混合器)；}

解决方案

您需要使用

#include stdafx.h"#include <stdio.h>#include <windows.h>#include <mmdeviceapi.h>#include <endpointvolume.h>无效用法(){printf("用法:
");printf("SetVolume [报告当前音量]
");printf("SetVolume -d <new volume in decibels> [将当前默认渲染设备音量设置为新音量]
");printf("SetVolume -f <new volume as an Amplitude scalar> [将当前默认渲染设备音量设置为新音量]
");}int _tmain(int argc, _TCHAR* argv[]){HRESULT 小时；布尔分贝 = 假；布尔标量 = 假；双新卷；if (argc != 3 && argc != 1){用法();返回-1；}如果(argc == 3){if (argv[1][0] == '-'){if (argv[1][1] == 'f'){标量 = 真；}否则 if (argv[1][1] == 'd'){分贝=真；}}别的{用法();返回-1；}新卷 = _tstof(argv[2]);}//-------------------------CoInitialize(NULL);IMMDeviceEnumerator *deviceEnumerator = NULL;hr = CoCreateInstance(__uuidof(MMDeviceEnumerator), NULL, CLSCTX_INPROC_SERVER, __uuidof(IMMDeviceEnumerator), (LPVOID *)&deviceEnumerator);IMMDevice *defaultDevice = NULL;hr = deviceEnumerator->GetDefaultAudioEndpoint(eRender, eConsole, &defaultDevice);deviceEnumerator->Release();设备枚举器 = NULL；IAudioEndpointVolume *endpointVolume = NULL;hr = defaultDevice->Activate(__uuidof(IAudioEndpointVolume), CLSCTX_INPROC_SERVER, NULL, (LPVOID *)&endpointVolume);defaultDevice->Release();默认设备=空；//-------------------------浮动电流量 = 0;endpointVolume->GetMasterVolumeLevel(&currentVolume);printf("当前音量为:%f
", currentVolume);hr = endpointVolume->GetMasterVolumeLevelScalar(&currentVolume);printf("当前体积作为标量是:%f
", currentVolume);如果(分贝){hr = endpointVolume->SetMasterVolumeLevel((float)newVolume, NULL);}否则如果(标量){hr = endpointVolume->SetMasterVolumeLevelScalar((float)newVolume, NULL);}endpointVolume->Release();联合初始化()；返回0；}

I made a program to mute microphone using WinAPI and it seems to work perfectly in Windows XP but doesn't do a thing in Windows 7. Is it possible to control microphone volume or mute with WinAPI in Windows 7?

void setVolume(DWORD volume) {
HMIXER mixer;

if (mixerOpen(&mixer, 0, 0, 0, 0) != MMSYSERR_NOERROR) {
    MessageBoxW(NULL, L"Error: mixerOpen()", NULL, MB_ICONHAND);
    return;
}

// Get the line info
MIXERCAPS mixcaps;
MIXERLINE mixerLine;
mixerGetDevCaps(0, &mixcaps, sizeof(MIXERCAPS));
mixerLine.cbStruct = sizeof(MIXERLINE);
mixerLine.dwComponentType = MIXERLINE_COMPONENTTYPE_DST_WAVEIN;
mixerLine.dwSource = 0;
mixerLine.dwDestination = 0;

if (mixerGetLineInfo(reinterpret_cast<HMIXEROBJ>(mixer), &mixerLine, MIXER_GETLINEINFOF_SOURCE)
    != MMSYSERR_NOERROR) {
        MessageBoxW(NULL, L"Error: mixerGetLineInfo()", NULL, MB_ICONHAND);
        return;
}

// Get control for mixerline
MIXERCONTROL mixerCtrl;
MIXERLINECONTROLS mixerLineCtrl;

mixerLineCtrl.cbStruct = sizeof(MIXERLINECONTROLS);
mixerLineCtrl.dwLineID = mixerLine.dwLineID;
mixerLineCtrl.dwControlType = MIXERCONTROL_CONTROLTYPE_VOLUME;
mixerLineCtrl.cControls = 1;
mixerLineCtrl.pamxctrl = &mixerCtrl;
mixerLineCtrl.cbmxctrl = sizeof(MIXERCONTROL);
mixerLineCtrl.cControls = 5;

if (mixerGetLineControls(reinterpret_cast<HMIXEROBJ>(mixer), &mixerLineCtrl, MIXER_GETLINECONTROLSF_ONEBYTYPE)
    != MMSYSERR_NOERROR) {
        MessageBoxW(NULL, L"Error: mixerGetLineControls()", NULL, MB_ICONHAND);
        return;
}

// Volume..
MIXERCONTROLDETAILS mixerCtrlDetails;
MIXERCONTROLDETAILS_UNSIGNED mixerCtrlDetailsUnsigned;

mixerCtrlDetailsUnsigned.dwValue = volume;
mixerCtrlDetails.dwControlID = mixerCtrl.dwControlID;
mixerCtrlDetails.cbStruct = sizeof(MIXERCONTROLDETAILS);
mixerCtrlDetails.cMultipleItems = 0;
mixerCtrlDetails.paDetails = &mixerCtrlDetailsUnsigned;
mixerCtrlDetails.cbDetails = sizeof(MIXERCONTROLDETAILS_UNSIGNED);
mixerCtrlDetails.cChannels = 1;

if (mixerSetControlDetails(reinterpret_cast<HMIXEROBJ>(mixer), &mixerCtrlDetails, MIXER_OBJECTF_HMIXER | MIXER_GETCONTROLDETAILSF_VALUE)
    != MMSYSERR_NOERROR) {
        MessageBoxW(NULL, L"Error: mixerSetControlDetails()", NULL, MB_ICONHAND);
        return;
}

mixerClose(mixer);
}

解决方案

You need to use the new audio APIs introduced by Windows Vista.

Here is an example.

*EDIT: Visual Studio 2015 (C++):

Usange:

// To 100%
ConsoleApplication3.exe -f 1

// To  0%
ConsoleApplication3.exe -f 0

// To 50%
ConsoleApplication3.exe -f 0.50

Code:

#include "stdafx.h"
#include <stdio.h>
#include <windows.h>
#include <mmdeviceapi.h>
#include <endpointvolume.h>

void Usage()
{
    printf("Usage: 
");
    printf(" SetVolume [Reports the current volume]
");
    printf(" SetVolume -d <new volume in decibels> [Sets the current default render device volume to the new volume]
");
    printf(" SetVolume -f <new volume as an amplitude scalar> [Sets the current default render device volume to the new volume]
");

}
int _tmain(int argc, _TCHAR* argv[])
{
    HRESULT hr;
    bool decibels = false;
    bool scalar = false;
    double newVolume;
    if (argc != 3 && argc != 1)
    {
        Usage();
        return -1;
    }
    if (argc == 3)
    {
        if (argv[1][0] == '-')
        {
            if (argv[1][1] == 'f')
            {
                scalar = true;
            }
            else if (argv[1][1] == 'd')
            {
                decibels = true;
            }
        }
        else
        {
            Usage();
            return -1;
        }

        newVolume = _tstof(argv[2]);
    }

    // -------------------------
    CoInitialize(NULL);
    IMMDeviceEnumerator *deviceEnumerator = NULL;
    hr = CoCreateInstance(__uuidof(MMDeviceEnumerator), NULL, CLSCTX_INPROC_SERVER, __uuidof(IMMDeviceEnumerator), (LPVOID *)&deviceEnumerator);
    IMMDevice *defaultDevice = NULL;

    hr = deviceEnumerator->GetDefaultAudioEndpoint(eRender, eConsole, &defaultDevice);
    deviceEnumerator->Release();
    deviceEnumerator = NULL;

    IAudioEndpointVolume *endpointVolume = NULL;
    hr = defaultDevice->Activate(__uuidof(IAudioEndpointVolume), CLSCTX_INPROC_SERVER, NULL, (LPVOID *)&endpointVolume);
    defaultDevice->Release();
    defaultDevice = NULL;

    // -------------------------
    float currentVolume = 0;
    endpointVolume->GetMasterVolumeLevel(&currentVolume);
    printf("Current volume in dB is: %f
", currentVolume);

    hr = endpointVolume->GetMasterVolumeLevelScalar(&currentVolume);
    printf("Current volume as a scalar is: %f
", currentVolume);
    if (decibels)
    {
        hr = endpointVolume->SetMasterVolumeLevel((float)newVolume, NULL);
    }
    else if (scalar)
    {
        hr = endpointVolume->SetMasterVolumeLevelScalar((float)newVolume, NULL);
    }
    endpointVolume->Release();

    CoUninitialize();
    return 0;
}

这篇关于如何使用 C/C++ 在 Windows 7 中使麦克风静音?的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！