Z80 ASM BNF结构......我在正确的轨道上吗？ [英] Z80 ASM BNF structure... am I on the right track?

问题描述

我想学习BNF并试图组装一些Z80 ASM code。由于我是新来的这两个领域，我的问题是，我是连在正确的轨道？我想写Z80作为ASM EBNF的格式，这样我可以再找出哪里从那里从源头上创建计算机code。目前，我有以下几点：

I'm trying to learn BNF and attempting to assemble some Z80 ASM code. Since I'm new to both fields, my question is, am I even on the right track? I am trying to write the format of Z80 ASM as EBNF so that I can then figure out where to go from there to create machine code from the source. At the moment I have the following:

Assignment = Identifier, ":" ;

Instruction = Opcode, [ Operand ], [ Operand ] ;

Operand = Identifier | Something* ;

Something* = "(" , Identifier, ")" ;

Identifier = Alpha, { Numeric | Alpha } ;

Opcode = Alpha, Alpha ;

Int = [ "-" ], Numeric, { Numeric } ;

Alpha = "A" | "B" | "C" | "D" | "E" | "F" | 
        "G" | "H" | "I" | "J" | "K" | "L" | 
        "M" | "N" | "O" | "P" | "Q" | "R" | 
        "S" | "T" | "U" | "V" | "W" | "X" | 
        "Y" | "Z" ;

Numeric = "0" | "1" | "2" | "3"| "4" | 
          "5" | "6" | "7" | "8" | "9" ;

任何定向反馈，如果我错了会是优秀的。

Any directional feedback if I am going wrong would be excellent.

推荐答案

老派装配均汇编典型的手工codeD和使用即席分析技术来处理汇编源线，生产实际汇编code。
当汇编语法很简单（例如总是OP code REG，操作数），这已经足够好了。

Old-school assemblers were typically hand-coded in assembler and used adhoc parsing techniques to process assembly source lines to produce actual assembler code. When assembler syntax is simple (e.g. always OPCODE REG, OPERAND) this worked well enough.

现代的机器有凌乱，肮脏的指令集有很多变化的指令和操作数，这可能是复杂的语法允许多个索引寄存器参与操作前pression pssed前$ P $。允许与固定和重新定位的常数精密组装时前pressions各类加法运算的复杂化这一点。先进的装配允许条件编译，宏，结构化数据报关单等所有的语法添加了新的要求。通过特殊方法处理这一切的语法非常辛苦，并且是解析器发电机被发明的原因。

Modern machines have messy, nasty instruction sets with lots of instruction variations and operands, which may be expressed with complex syntax allowing multiple index registers to participate in the operand expression. Allowing sophisticated assembly-time expressions with fixed and relocatable constants with various types of addition operators complicates this. Sophisticated assemblers allowing conditional compilation, macros, structured data declarations, etc. all add new demands on syntax. Processing all this syntax by ad hoc methods is very hard and is the reason that parser generators were invented.

使用BNF和解析器发电机是要建立一个现代化的汇编，即使是传统的处理器，如Z80非常合理的方式。我已经做了这样的汇编摩托罗拉8位的机器，如六千八百零九分之六千八百，和我准备了一个现代的x86这样做。我觉得你的方向准确地记录了正确的道路。

Using a BNF and a parser generator is very reasonable way to build a modern assembler, even for a legacy processor such as the Z80. I have built such assemblers for Motorola 8 bit machines such as the 6800/6809, and am getting ready to do the same for a modern x86. I think you're headed down exactly the right path.

****** 修改 ************
该任择议定书要求，例如词法和语法分析器定义。
我在这里提供两种。

****** EDIT ************ The OP asked for example lexer and parser definitions. I've provided both here.

这是从真正的规范摘录了6809 asssembler。
完整的定义此处2-3倍的样品的大小。

These are excerpts from real specifications for a 6809 asssembler. The complete definitions are 2-3x the size of the samples here.

要保持下跌空间，我已经编辑了很多暗的角落复杂性
这是这些定义的点。
有人可能会由apparant复杂不要惊惶。该
一点是，这样的定义，您要的描述的了
语言的形状，而不是code将其程序上。
你会支付，如果您有一个显著较高的复杂性
code这一切都在一个特设的方式，这将是远
更少的维护。

To keep space down, I have edited out much of the dark-corner complexity which is the point of these definitions. One might be dismayed by the apparant complexity; the point is that with such definitions, you are trying to describe the shape of the language, not code it procedurally. You will pay a significantly higher complexity if you code all this in an ad hoc manner, and it will be far less maintainable.

这也将有一定的帮助要知道，这些定义
带有高端程序分析系统所使用的
已经词法/分析工具，子系统，叫
的DMS软件再造工具包。 DMS会自动从
在解析器specfication，这使得它的语法规则
容易得多，打造专业化分析的工具。最后，
解析器规范包含所谓的prettyprinter
声明，这使得DMS到regenreate从AST的源文本。
（该语法的真正目的是让我们重新构建presenting汇编的AST
指令，然后将它们吐出要被馈送到一个真实的汇编！）

It will also be of some help to know that these definitions are used with a high-end program analysis system that has lexing/parsing tools as subsystems, called the The DMS Software Reengineering Toolkit. DMS will automatically build ASTs from the
grammar rules in the parser specfication, which makes it a lot easier to buid parsing tools. Lastly, the parser specification contains so-called "prettyprinter" declarations, which allows DMS to regenreate source text from the ASTs. (The real purpose of the grammer was to allow us to build ASTs representing assembler instructions, and then spit them out to be fed to a real assembler!)

请注意一件事：（！在metasyntxax）语意和语法规则如何规定
不同的词法/语法分析器发电机系统之间有所不同。该
基于DMS-规范的语法也不例外。 DMS具有相对成熟的
它自己的语法规则，真的是不实际的在这里的可用空间来解释。你有想法，生活，其他系统使用类似的符号，对于
EBNF规则和和规则前pression变种词位。

One thing of note: how lexemes and grammar rules are stated (the metasyntxax!) varies somewhat between different lexer/parser generator systems. The syntax of DMS-based specifications is no exception. DMS has relatively sophisticated grammar rules of its own, that really aren't practical to explain in the space available here. You'll have to live with idea that other systems use similar notations, for EBNF for rules and and regular expression variants for lexemes.

，他可以实现类似的词法分析器/分析器
与任何词法分析器/解析器生成工具，例如，FLEX / YACC，
的JavaCC，ANTLR，...

Given the OP's interests, he can implement similar lexer/parsers with any lexer/parser generator tool, e.g., FLEX/YACC, JAVACC, ANTLR, ...

****** LEXER **********

-- M6809.lex: Lexical Description for M6809
-- Copyright (C) 1989,1999-2002 Ira D. Baxter

%%
#mainmode Label

#macro digit "[0-9]"
#macro hexadecimaldigit "<digit>|[a-fA-F]"

#macro comment_body_character "[\u0009 \u0020-\u007E]" -- does not include NEWLINE

#macro blank "[\u0000 \ \u0009]"

#macro hblanks "<blank>+"

#macro newline "\u000d \u000a? \u000c? | \u000a \u000c?" -- form feed allowed only after newline

#macro bare_semicolon_comment "\; <comment_body_character>* "

#macro bare_asterisk_comment "\* <comment_body_character>* "

...[snip]

#macro hexadecimal_digit "<digit> | [a-fA-F]"

#macro binary_digit "[01]"

#macro squoted_character "\' [\u0021-\u007E]"

#macro string_character "[\u0009 \u0020-\u007E]"

%%Label -- (First mode) processes left hand side of line: labels, opcodes, etc.

#skip "(<blank>*<newline>)+"
#skip "(<blank>*<newline>)*<blank>+"
  << (GotoOpcodeField ?) >>

#precomment "<comment_line><newline>"

#preskip "(<blank>*<newline>)+"
#preskip "(<blank>*<newline>)*<blank>+"
  << (GotoOpcodeField ?) >>

-- Note that an apparant register name is accepted as a label in this mode
#token LABEL [STRING] "<identifier>"
  <<  (local (;; (= [TokenScan natural] 1) ; process all string characters
	     (= [TokenLength natural] ?:TokenCharacterCount)=
	     (= [TokenString (reference TokenBodyT)] (. ?:TokenCharacters))
	     (= [Result (reference string)] (. ?:Lexeme:Literal:String:Value))
	     [ThisCharacterCode natural]
	     (define Ordinala #61)
	     (define Ordinalf #66)
	     (define OrdinalA #41)
	     (define OrdinalF #46)
	 );;
     (;; (= (@ Result) `') ; start with empty string
	 (while (<= TokenScan TokenLength)
	  (;;   (= ThisCharacterCode (coerce natural TokenString:TokenScan))  
		(+= TokenScan) ; bump past character
		(ifthen (>= ThisCharacterCode Ordinala)
		   (-= ThisCharacterCode #20) ; fold to upper case
		)ifthen
		(= (@ Result) (append (@ Result) (coerce character ThisCharacterCode)))=

	    );;
	 )while
     );;
  )local
  (= ?:Lexeme:Literal:String:Format (LiteralFormat:MakeCompactStringLiteralFormat 0))  ; nothing interesting in string
  (GotoLabelList ?)
  >>

%%OpcodeField

#skip "<hblanks>"
  << (GotoEOLComment ?) >>
#ifnotoken
  << (GotoEOLComment ?) >>

-- Opcode field tokens
#token 'ABA'       "[aA][bB][aA]"
   << (GotoEOLComment ?) >>
#token 'ABX'       "[aA][bB][xX]"
   << (GotoEOLComment ?) >>
#token 'ADC'       "[aA][dD][cC]"
   << (GotoABregister ?) >>
#token 'ADCA'      "[aA][dD][cC][aA]"
   << (GotoOperand ?) >>
#token 'ADCB'      "[aA][dD][cC][bB]"
   << (GotoOperand ?) >>
#token 'ADCD'      "[aA][dD][cC][dD]"
   << (GotoOperand ?) >>
#token 'ADD'       "[aA][dD][dD]"
   << (GotoABregister ?) >>
#token 'ADDA'      "[aA][dD][dD][aA]"
   << (GotoOperand ?) >>
#token 'ADDB'      "[aA][dD][dD][bB]"
   << (GotoOperand ?) >>
#token 'ADDD'      "[aA][dD][dD][dD]"
   << (GotoOperand ?) >>
#token 'AND'       "[aA][nN][dD]"
   << (GotoABregister ?) >>
#token 'ANDA'      "[aA][nN][dD][aA]"
   << (GotoOperand ?) >>
#token 'ANDB'      "[aA][nN][dD][bB]"
   << (GotoOperand ?) >>
#token 'ANDCC'     "[aA][nN][dD][cC][cC]"
   << (GotoRegister ?) >>
...[long list of opcodes snipped]

#token IDENTIFIER [STRING] "<identifier>"
  <<  (local (;; (= [TokenScan natural] 1) ; process all string characters
	     (= [TokenLength natural] ?:TokenCharacterCount)=
	     (= [TokenString (reference TokenBodyT)] (. ?:TokenCharacters))
	     (= [Result (reference string)] (. ?:Lexeme:Literal:String:Value))
	     [ThisCharacterCode natural]
	     (define Ordinala #61)
	     (define Ordinalf #66)
	     (define OrdinalA #41)
	     (define OrdinalF #46)
	 );;
     (;; (= (@ Result) `') ; start with empty string
	 (while (<= TokenScan TokenLength)
	  (;;   (= ThisCharacterCode (coerce natural TokenString:TokenScan))  
		(+= TokenScan) ; bump past character
		(ifthen (>= ThisCharacterCode Ordinala)
		   (-= ThisCharacterCode #20) ; fold to upper case
		)ifthen
		(= (@ Result) (append (@ Result) (coerce character ThisCharacterCode)))=

	    );;
	 )while
     );;
  )local
  (= ?:Lexeme:Literal:String:Format (LiteralFormat:MakeCompactStringLiteralFormat 0))  ; nothing interesting in string
  (GotoOperandField ?)
  >>

#token '#'   "\#" -- special constant introduction (FDB)
   << (GotoDataField ?) >>

#token NUMBER [NATURAL] "<decimal_number>"
  << (local [format LiteralFormat:NaturalLiteralFormat]
    (;; (= ?:Lexeme:Literal:Natural:Value (ConvertDecimalTokenStringToNatural (. format) ? 0 0))
	(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
    );;
 )local
 (GotoOperandField ?)
  >>

#token NUMBER [NATURAL] "\$ <hexadecimal_digit>+"
  << (local [format LiteralFormat:NaturalLiteralFormat]
    (;; (= ?:Lexeme:Literal:Natural:Value (ConvertHexadecimalTokenStringToNatural (. format) ? 1 0))
	(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
    );;
 )local
 (GotoOperandField ?)
  >>

#token NUMBER [NATURAL] "\% <binary_digit>+"
  << (local [format LiteralFormat:NaturalLiteralFormat]
    (;; (= ?:Lexeme:Literal:Natural:Value (ConvertBinaryTokenStringToNatural (. format) ? 1 0))
	(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
    );;
 )local
 (GotoOperandField ?)
  >>

#token CHARACTER [CHARACTER] "<squoted_character>"
  <<  (= ?:Lexeme:Literal:Character:Value (TokenStringCharacter ? 2))
  (= ?:Lexeme:Literal:Character:Format (LiteralFormat:MakeCompactCharacterLiteralFormat 0 0)) ; nothing special about character
  (GotoOperandField ?)
  >>


%%OperandField

#skip "<hblanks>"
  << (GotoEOLComment ?) >>
#ifnotoken
  << (GotoEOLComment ?) >>

-- Tokens signalling switch to index register modes
#token ','   "\,"
   <<(GotoRegisterField ?)>>
#token '['   "\["
   <<(GotoRegisterField ?)>>

-- Operators for arithmetic syntax
#token '!!'  "\!\!"
#token '!'   "\!"
#token '##'  "\#\#"
#token '#'   "\#"
#token '&'   "\&"
#token '('   "\("
#token ')'   "\)"
#token '*'   "\*"
#token '+'   "\+"
#token '-'   "\-"
#token '/'   "\/"
#token '//'   "\/\/"
#token '<'   "\<"
#token '<'   "\<" 
#token '<<'  "\<\<"
#token '<='  "\<\="
#token '</'  "\<\/"
#token '='   "\="
#token '>'   "\>"
#token '>'   "\>"
#token '>='  "\>\="
#token '>>'  "\>\>"
#token '>/'  "\>\/"
#token '\\'  "\\"
#token '|'   "\|"
#token '||'  "\|\|"

#token NUMBER [NATURAL] "<decimal_number>"
  << (local [format LiteralFormat:NaturalLiteralFormat]
    (;; (= ?:Lexeme:Literal:Natural:Value (ConvertDecimalTokenStringToNatural (. format) ? 0 0))
	(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
    );;
 )local
  >>

#token NUMBER [NATURAL] "\$ <hexadecimal_digit>+"
  << (local [format LiteralFormat:NaturalLiteralFormat]
    (;; (= ?:Lexeme:Literal:Natural:Value (ConvertHexadecimalTokenStringToNatural (. format) ? 1 0))
	(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
    );;
 )local
  >>

#token NUMBER [NATURAL] "\% <binary_digit>+"
  << (local [format LiteralFormat:NaturalLiteralFormat]
    (;; (= ?:Lexeme:Literal:Natural:Value (ConvertBinaryTokenStringToNatural (. format) ? 1 0))
	(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
    );;
 )local
  >>

-- Notice that an apparent register is accepted as a label in this mode
#token IDENTIFIER [STRING] "<identifier>"
  <<  (local (;; (= [TokenScan natural] 1) ; process all string characters
	     (= [TokenLength natural] ?:TokenCharacterCount)=
	     (= [TokenString (reference TokenBodyT)] (. ?:TokenCharacters))
	     (= [Result (reference string)] (. ?:Lexeme:Literal:String:Value))
	     [ThisCharacterCode natural]
	     (define Ordinala #61)
	     (define Ordinalf #66)
	     (define OrdinalA #41)
	     (define OrdinalF #46)
	 );;
     (;; (= (@ Result) `') ; start with empty string
	 (while (<= TokenScan TokenLength)
	  (;;   (= ThisCharacterCode (coerce natural TokenString:TokenScan))  
		(+= TokenScan) ; bump past character
		(ifthen (>= ThisCharacterCode Ordinala)
		   (-= ThisCharacterCode #20) ; fold to upper case
		)ifthen
		(= (@ Result) (append (@ Result) (coerce character ThisCharacterCode)))=

	    );;
	 )while
     );;
  )local
  (= ?:Lexeme:Literal:String:Format (LiteralFormat:MakeCompactStringLiteralFormat 0))  ; nothing interesting in string
  >>

%%Register -- operand field for TFR, ANDCC, ORCC, EXG opcodes

#skip "<hblanks>"
#ifnotoken << (GotoRegisterField ?) >>

%%RegisterField -- handles registers and indexing mode syntax
-- In this mode, names that look like registers are recognized as registers

#skip "<hblanks>"
  << (GotoEOLComment ?) >>
#ifnotoken
  << (GotoEOLComment ?) >>

#token '['   "\["
#token ']'   "\]"
#token '--'  "\-\-"
#token '++'  "\+\+"

#token 'A'      "[aA]"
#token 'B'      "[bB]"
#token 'CC'     "[cC][cC]"
#token 'DP'     "[dD][pP] | [dD][pP][rR]" -- DPR shouldnt be needed, but found one instance
#token 'D'      "[dD]"
#token 'Z'      "[zZ]"

-- Index register designations
#token 'X'      "[xX]"
#token 'Y'      "[yY]"
#token 'U'      "[uU]"
#token 'S'      "[sS]"
#token 'PCR'    "[pP][cC][rR]"
#token 'PC'     "[pP][cC]"

#token ','    "\,"

-- Operators for arithmetic syntax
#token '!!'  "\!\!"
#token '!'   "\!"
#token '##'  "\#\#"
#token '#'   "\#"
#token '&'   "\&"
#token '('   "\("
#token ')'   "\)"
#token '*'   "\*"
#token '+'   "\+"
#token '-'   "\-"
#token '/'   "\/"
#token '<'   "\<"
#token '<'   "\<" 
#token '<<'  "\<\<"
#token '<='  "\<\="
#token '<|'  "\<\|"
#token '='   "\="
#token '>'   "\>"
#token '>'   "\>"
#token '>='  "\>\="
#token '>>'  "\>\>"
#token '>|'  "\>\|"
#token '\\'  "\\"
#token '|'   "\|"
#token '||'  "\|\|"

#token NUMBER [NATURAL] "<decimal_number>"
  << (local [format LiteralFormat:NaturalLiteralFormat]
    (;; (= ?:Lexeme:Literal:Natural:Value (ConvertDecimalTokenStringToNatural (. format) ? 0 0))
	(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
    );;
 )local
  >>

... [snip]

%% -- end M6809.lex

************ PARSER **********

-- M6809.ATG: Motorola 6809 assembly code parser
-- (C) Copyright 1989;1999-2002 Ira D. Baxter; All Rights Reserved

m6809 = sourcelines ;

sourcelines = ;
sourcelines = sourcelines sourceline EOL ;
  <<PrettyPrinter>>: { V(CV(sourcelines[1]),H(sourceline,A<eol>(EOL))); }

-- leading opcode field symbol should be treated as keyword.

sourceline = ;
sourceline = labels ;
sourceline = optional_labels 'EQU' expression ;
  <<PrettyPrinter>>: { H(optional_labels,A<opcode>('EQU'),A<operand>(expression)); }
sourceline = LABEL 'SET' expression ;
  <<PrettyPrinter>>: { H(A<firstlabel>(LABEL),A<opcode>('SET'),A<operand>(expression)); }
sourceline = optional_label instruction ;
  <<PrettyPrinter>>: { H(optional_label,instruction); }
sourceline = optional_label optlabelleddirective ;
  <<PrettyPrinter>>: { H(optional_label,optlabelleddirective); }
sourceline = optional_label implicitdatadirective ;
  <<PrettyPrinter>>: { H(optional_label,implicitdatadirective); }
sourceline = unlabelleddirective ;
sourceline = '?ERROR' ;
  <<PrettyPrinter>>: { A<opcode>('?ERROR'); }

optional_label = labels ;
optional_label = LABEL ':' ;
  <<PrettyPrinter>>: { H(A<firstlabel>(LABEL),':'); }
optional_label = ;

optional_labels = ;
optional_labels = labels ;
labels = LABEL ;
  <<PrettyPrinter>>: { A<firstlabel>(LABEL); }
labels = labels ',' LABEL ;
  <<PrettyPrinter>>: { H(labels[1],',',A<otherlabels>(LABEL)); }

unlabelleddirective = 'END' ;
  <<PrettyPrinter>>: { A<opcode>('END'); }
unlabelleddirective = 'END' expression ;
  <<PrettyPrinter>>: { H(A<opcode>('END'),A<operand>(expression)); }
unlabelleddirective = 'IF' expression EOL conditional ;
  <<PrettyPrinter>>: { V(H(A<opcode>('IF'),H(A<operand>(expression),A<eol>(EOL))),CV(conditional)); }
unlabelleddirective = 'IFDEF' IDENTIFIER EOL conditional ;
  <<PrettyPrinter>>: { V(H(A<opcode>('IFDEF'),H(A<operand>(IDENTIFIER),A<eol>(EOL))),CV(conditional)); }
unlabelleddirective = 'IFUND' IDENTIFIER EOL conditional ;
  <<PrettyPrinter>>: { V(H(A<opcode>('IFUND'),H(A<operand>(IDENTIFIER),A<eol>(EOL))),CV(conditional)); }
unlabelleddirective = 'INCLUDE' FILENAME ;
  <<PrettyPrinter>>: { H(A<opcode>('INCLUDE'),A<operand>(FILENAME)); }
unlabelleddirective = 'LIST' expression ;
  <<PrettyPrinter>>: { H(A<opcode>('LIST'),A<operand>(expression)); }
unlabelleddirective = 'NAME' IDENTIFIER ;
  <<PrettyPrinter>>: { H(A<opcode>('NAME'),A<operand>(IDENTIFIER)); }
unlabelleddirective = 'ORG' expression ;
  <<PrettyPrinter>>: { H(A<opcode>('ORG'),A<operand>(expression)); }
unlabelleddirective = 'PAGE' ;
  <<PrettyPrinter>>: { A<opcode>('PAGE'); }
unlabelleddirective = 'PAGE' HEADING ;
  <<PrettyPrinter>>: { H(A<opcode>('PAGE'),A<operand>(HEADING)); }
unlabelleddirective = 'PCA' expression ;
  <<PrettyPrinter>>: { H(A<opcode>('PCA'),A<operand>(expression)); }
unlabelleddirective = 'PCC' expression ;
  <<PrettyPrinter>>: { H(A<opcode>('PCC'),A<operand>(expression)); }
unlabelleddirective = 'PSR' expression ;
  <<PrettyPrinter>>: { H(A<opcode>('PSR'),A<operand>(expression)); }
unlabelleddirective = 'TABS' numberlist ;
  <<PrettyPrinter>>: { H(A<opcode>('TABS'),A<operand>(numberlist)); }
unlabelleddirective = 'TITLE' HEADING ;
  <<PrettyPrinter>>: { H(A<opcode>('TITLE'),A<operand>(HEADING)); }
unlabelleddirective = 'WITH' settings ;
  <<PrettyPrinter>>: { H(A<opcode>('WITH'),A<operand>(settings)); }

settings = setting ;
settings = settings ',' setting ;
  <<PrettyPrinter>>: { H*; }
setting = 'WI' '=' NUMBER ;
  <<PrettyPrinter>>: { H*; }
setting = 'DE' '=' NUMBER ;
  <<PrettyPrinter>>: { H*; }
setting = 'M6800' ;
setting = 'M6801' ;
setting = 'M6809' ;
setting = 'M6811' ;

-- collects lines of conditional code into blocks
conditional = 'ELSEIF' expression EOL conditional ;
  <<PrettyPrinter>>: { V(H(A<opcode>('ELSEIF'),H(A<operand>(expression),A<eol>(EOL))),CV(conditional[1])); }
conditional = 'ELSE' EOL else ;
  <<PrettyPrinter>>: { V(H(A<opcode>('ELSE'),A<eol>(EOL)),CV(else)); }
conditional = 'FIN' ;
  <<PrettyPrinter>>: { A<opcode>('FIN'); }
conditional = sourceline EOL conditional ;
  <<PrettyPrinter>>: { V(H(sourceline,A<eol>(EOL)),CV(conditional[1])); }

else = 'FIN' ;
  <<PrettyPrinter>>: { A<opcode>('FIN'); }
else = sourceline EOL else ;
  <<PrettyPrinter>>: { V(H(sourceline,A<eol>(EOL)),CV(else[1])); }

-- keyword-less directive, generates data tables

implicitdatadirective = implicitdatadirective ',' implicitdataitem ;
  <<PrettyPrinter>>: { H*; }
implicitdatadirective = implicitdataitem ;

implicitdataitem = '#' expression ;
  <<PrettyPrinter>>: { A<operand>(H('#',expression)); }
implicitdataitem = '+' expression ;
  <<PrettyPrinter>>: { A<operand>(H('+',expression)); }
implicitdataitem = '-' expression ;
  <<PrettyPrinter>>: { A<operand>(H('-',expression)); }
implicitdataitem = expression ;
  <<PrettyPrinter>>: { A<operand>(expression); }
implicitdataitem = STRING ;
  <<PrettyPrinter>>: { A<operand>(STRING); }

-- instructions valid for m680C (see Software Dynamics ASM manual)
instruction = 'ABA' ;
  <<PrettyPrinter>>: { A<opcode>('ABA'); }
instruction = 'ABX' ;
  <<PrettyPrinter>>: { A<opcode>('ABX'); }

instruction = 'ADC' 'A' operandfetch ;
  <<PrettyPrinter>>: { H(A<opcode>(H('ADC','A')),A<operand>(operandfetch)); }
instruction = 'ADC' 'B' operandfetch ;
  <<PrettyPrinter>>: { H(A<opcode>(H('ADC','B')),A<operand>(operandfetch)); }
instruction = 'ADCA' operandfetch ;
  <<PrettyPrinter>>: { H(A<opcode>('ADCA'),A<operand>(operandfetch)); }
instruction = 'ADCB' operandfetch ;
  <<PrettyPrinter>>: { H(A<opcode>('ADCB'),A<operand>(operandfetch)); }
instruction = 'ADCD' operandfetch ;
  <<PrettyPrinter>>: { H(A<opcode>('ADCD'),A<operand>(operandfetch)); }

instruction = 'ADD' 'A' operandfetch ;
  <<PrettyPrinter>>: { H(A<opcode>(H('ADD','A')),A<operand>(operandfetch)); }
instruction = 'ADD' 'B' operandfetch ;
  <<PrettyPrinter>>: { H(A<opcode>(H('ADD','B')),A<operand>(operandfetch)); }
instruction = 'ADDA' operandfetch ;
  <<PrettyPrinter>>: { H(A<opcode>('ADDA'),A<operand>(operandfetch)); }

[..snip...]

-- condition code mask for ANDCC and ORCC
conditionmask = '#' expression ;
  <<PrettyPrinter>>: { H*; }
conditionmask = expression ;

target = expression ;

operandfetch = '#' expression ; --immediate
  <<PrettyPrinter>>: { H*; }

operandfetch = memoryreference ;

operandstore = memoryreference ;

memoryreference = '[' indexedreference ']' ;
  <<PrettyPrinter>>: { H*; }
memoryreference = indexedreference ;

indexedreference = offset ;
indexedreference = offset ',' indexregister ;
  <<PrettyPrinter>>: { H*; }
indexedreference = ',' indexregister ;
  <<PrettyPrinter>>: { H*; }
indexedreference = ',' '--' indexregister ;
  <<PrettyPrinter>>: { H*; }
indexedreference = ',' '-' indexregister ;
  <<PrettyPrinter>>: { H*; }
indexedreference = ',' indexregister '++' ;
  <<PrettyPrinter>>: { H*; }
indexedreference = ',' indexregister '+' ;
  <<PrettyPrinter>>: { H*; }

offset = '>' expression ; -- page zero ref
  <<PrettyPrinter>>: { H*; }
offset = '<' expression ; -- long reference
  <<PrettyPrinter>>: { H*; }
offset = expression ;
offset = 'A' ;
offset = 'B' ;
offset = 'D' ;

registerlist = registername ;
registerlist = registerlist ',' registername ;
  <<PrettyPrinter>>: { H*; }

registername = 'A' ;
registername = 'B' ;
registername = 'CC' ;
registername = 'DP' ;
registername = 'D' ;
registername = 'Z' ;
registername = indexregister ;

indexregister = 'X' ;
indexregister = 'Y' ;
indexregister = 'U' ;  -- not legal on M6811
indexregister = 'S' ;
indexregister = 'PCR' ;
indexregister = 'PC' ;

expression = sum '=' sum ;
  <<PrettyPrinter>>: { H*; }
expression = sum '<<' sum ;
  <<PrettyPrinter>>: { H*; }
expression = sum '</' sum ;
  <<PrettyPrinter>>: { H*; }
expression = sum '<=' sum ;
  <<PrettyPrinter>>: { H*; }
expression = sum '<' sum ;
  <<PrettyPrinter>>: { H*; }
expression = sum '>>' sum ;
  <<PrettyPrinter>>: { H*; }
expression = sum '>/' sum ;
  <<PrettyPrinter>>: { H*; }
expression = sum '>=' sum ;
  <<PrettyPrinter>>: { H*; }
expression = sum '>' sum ;
  <<PrettyPrinter>>: { H*; }
expression = sum '#' sum ;
  <<PrettyPrinter>>: { H*; }
expression = sum ;

sum = product ;
sum = sum '+' product ;
  <<PrettyPrinter>>: { H*; }
sum = sum '-' product ;
  <<PrettyPrinter>>: { H*; }
sum = sum '!' product ;
  <<PrettyPrinter>>: { H*; }
sum = sum '!!' product ;
  <<PrettyPrinter>>: { H*; }

product = term '*' product ;
  <<PrettyPrinter>>: { H*; }
product = term '||' product ; -- wrong?
  <<PrettyPrinter>>: { H*; }
product = term '/' product ;
  <<PrettyPrinter>>: { H*; }
product = term '//' product ;
  <<PrettyPrinter>>: { H*; }
product = term '&' product ;
  <<PrettyPrinter>>: { H*; }
product = term '##' product ;
  <<PrettyPrinter>>: { H*; }
product = term ;

term = '+' term ;
  <<PrettyPrinter>>: { H*; }
term = '-' term ; 
  <<PrettyPrinter>>: { H*; }
term = '\\' term ; -- complement
  <<PrettyPrinter>>: { H*; }
term = '&' term ; -- not

term = IDENTIFIER ;
term = NUMBER ;
term = CHARACTER ;
term = '*' ;
term = '(' expression ')' ;
  <<PrettyPrinter>>: { H*; }

numberlist = NUMBER ;
numberlist = numberlist ',' NUMBER ;
  <<PrettyPrinter>>: { H*; }

这篇关于Z80 ASM BNF结构......我在正确的轨道上吗？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！