图像处理：“可口可乐”识别的算法改进 [英] Image Processing: Algorithm Improvement for 'Coca-Cola Can' Recognition

问题描述

过去几年，我参与的一个最有趣的项目是关于库。

预处理：对于图像预处理，即将图像转换为更原始的形式给予算法，我使用了两种方法：

1. 将颜色域从RGB更改为，以获得2个先前步骤后的所有项目的轮廓。
   

算法：我为此任务选择的算法取自（SIFT）或

特殊图像特征
来自缩放不变关键点

ORB：SIFT或SURF的有效替代方案

One of the most interesting projects I've worked on in the past couple of years was a project about image processing. The goal was to develop a system to be able to recognize Coca-Cola 'cans' (note that I'm stressing the word 'cans', you'll see why in a minute). You can see a sample below, with the can recognized in the green rectangle with scale and rotation.

Some constraints on the project:

• The background could be very noisy.
• The can could have any scale or rotation or even orientation (within reasonable limits).
• The image could have some degree of fuzziness (contours might not be entirely straight).
• There could be Coca-Cola bottles in the image, and the algorithm should only detect the can!
• The brightness of the image could vary a lot (so you can't rely "too much" on color detection).
• The can could be partly hidden on the sides or the middle and possibly partly hidden behind a bottle.
• There could be no can at all in the image, in which case you had to find nothing and write a message saying so.

So you could end up with tricky things like this (which in this case had my algorithm totally fail):

I did this project a while ago, and had a lot of fun doing it, and I had a decent implementation. Here are some details about my implementation:

Language: Done in C++ using OpenCV library.

Pre-processing: For the image pre-processing, i.e. transforming the image into a more raw form to give to the algorithm, I used 2 methods:

1. Changing color domain from RGB to HSV and filtering based on "red" hue, saturation above a certain threshold to avoid orange-like colors, and filtering of low value to avoid dark tones. The end result was a binary black and white image, where all white pixels would represent the pixels that match this threshold. Obviously there is still a lot of crap in the image, but this reduces the number of dimensions you have to work with.
2. Noise filtering using median filtering (taking the median pixel value of all neighbors and replace the pixel by this value) to reduce noise.
3. Using Canny Edge Detection Filter to get the contours of all items after 2 precedent steps.

Algorithm: The algorithm itself I chose for this task was taken from this awesome book on feature extraction and called Generalized Hough Transform (pretty different from the regular Hough Transform). It basically says a few things:

• You can describe an object in space without knowing its analytical equation (which is the case here).
• It is resistant to image deformations such as scaling and rotation, as it will basically test your image for every combination of scale factor and rotation factor.
• It uses a base model (a template) that the algorithm will "learn".
• Each pixel remaining in the contour image will vote for another pixel which will supposedly be the center (in terms of gravity) of your object, based on what it learned from the model.

In the end, you end up with a heat map of the votes, for example here all the pixels of the contour of the can will vote for its gravitational center, so you'll have a lot of votes in the same pixel corresponding to the center, and will see a peak in the heat map as below:

Once you have that, a simple threshold-based heuristic can give you the location of the center pixel, from which you can derive the scale and rotation and then plot your little rectangle around it (final scale and rotation factor will obviously be relative to your original template). In theory at least...

Results: Now, while this approach worked in the basic cases, it was severely lacking in some areas:

• It is extremely slow! I'm not stressing this enough. Almost a full day was needed to process the 30 test images, obviously because I had a very high scaling factor for rotation and translation, since some of the cans were very small.
• It was completely lost when bottles were in the image, and for some reason almost always found the bottle instead of the can (perhaps because bottles were bigger, thus had more pixels, thus more votes)
• Fuzzy images were also no good, since the votes ended up in pixel at random locations around the center, thus ending with a very noisy heat map.
• In-variance in translation and rotation was achieved, but not in orientation, meaning that a can that was not directly facing the camera objective wasn't recognized.

Can you help me improve my specific algorithm, using exclusively OpenCV features, to resolve the four specific issues mentioned?

I hope some people will also learn something out of it as well, after all I think not only people who ask questions should learn. :)

解决方案

An alternative approach would be to extract features (keypoints) using the scale-invariant feature transform (SIFT) or Speeded Up Robust Features (SURF).

It is implemented in OpenCV 2.3.1.

You can find a nice code example using features in Features2D + Homography to find a known object

Both algorithms are invariant to scaling and rotation. Since they work with features, you can also handle occlusion (as long as enough keypoints are visible).

Image source: tutorial example

The processing takes a few hundred ms for SIFT, SURF is bit faster, but it not suitable for real-time applications. ORB uses FAST which is weaker regarding rotation invariance.

The original papers

• SURF: Speeded Up Robust Features
• Distinctive Image Features from Scale-Invariant Keypoints
• ORB: an efficient alternative to SIFT or SURF

这篇关于图像处理：“可口可乐”识别的算法改进的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！