使用Sony API通过路由器远程控制多个摄像头 [英] Controlling multiple cameras remotely with Sony API via router

问题描述

我有五个索尼FDR-X1000相机，我想使用Sony遥控API在我的笔记本电脑同时控制它们。我的计划是将它们全部连接到路由器，然后将我的设备连接到路由器，并发送他们的请求开始/停止录制。

I've got five Sony FDR-X1000 cameras and I want to control them all at the same time with my laptop using the Sony remote control API. My plan is connecting them all to a router and then connecting my device to the router and sending them post requests to start/stop recording.

这是可能的，

推荐答案

本文介绍如何通过WPS连接多个摄像机。我没有尝试过，但也许会有所帮助。

This article shows how to connect multiple cameras via WPS. I have not tried it myself but maybe it will help.

http://e4e.ucsd.edu/news-and-updates/stereo-qx1-control

1.将QX1插入多摄像头模式。为此，请点击电池盖下面的Wi-Fi按钮，直到液晶显示屏旁边有多相机模式指示灯。

1.Put the QX1s into multi camera mode. To do this, tap the Wi-Fi button under the battery cover until the LCD has a block next to the multi camera mode indicator.

2.将路由器插入WPS按钮配对模式。

2.Put the router into WPS pushbutton pairing mode.

3.要配对每个摄像机，请按住Wi-Fi按钮，直到摄像机发出哔声，或直到您在路由器上看到设备已连接。

3.To pair each camera, push and hold the Wi-Fi button until the camera beeps, or until you see an indication on the router that a device has connected. Repeat for each camera.

4.您现在应该已将相机连接到Wi-Fi路由器。

4.You should now have your cameras connected to the Wi-Fi router.

如果使用Wi-Fi路由器执行此操作，您可以查找每个摄像机的分配的IP地址，并让您的软件直接与该IP通信。其他一切工作原理与一台相机相同。

If you do this with a Wi-Fi router, you can look up the assigned IP addresses for each camera, and have your software to talk to that IP directly. Everything else works the same as with one camera.

这篇关于使用Sony API通过路由器远程控制多个摄像头的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！