改变Beagle Bone Black USB0的静态IP [英] Changing the static IP of Beagle Bone Black USB0

问题描述

我的目标是更改 USB0 的I​​P地址。
Beagle Bone黑色奔跑Debian。

我尝试更改 / etc / network / interfaces ，使默认地址为 192.168 .7.3 而不是 192.168.7.2 如下：

  iface usb0 inet static 
地址192.168.7.3 
 netmask 255.255.255.0 
网络192.168.7.0 
网关192.168.7.1 
  

运行

  / etc / init。 d / networking restart 
  

它仍然在 192.168.7.2 。
我尝试重新签署，但是无济于事。

我尝试更改 / boot / uboot / scripts中的IP地址/setup-ubuntu-armhf-3.8.13-bone30.sh ，但基本上这个文件会覆盖 / etc / network / interfaces 。
重新启动后仍然IP仍然是 192.168.7.2 。

编辑： strong>
还尝试更改IP：

  / media / Angstrom / usr / bin / g-ether -load.sh 
 /media/Angstrom/etc/udev/rules.d/udhcpd.rules 
  

哪些不起作用。

尝试更改：

  /opt/scripts/boot/am335x_evm.sh 
  

现在网络无法访问：

  ssh：连接到主机192.168.7.3端口22：网络无法访问
  / pre> 
 
解决方案
经过多次搜索和尝试，我得出结论，这不能以任何简单的方式完成。 
 
My goal is to change the IP address of USB0. 
The Beagle Bone Black run Debian. 

I tryed to change /etc/network/interfaces such that default address is 192.168.7.3 instead of 192.168.7.2 as this: 
iface usb0 inet static
    address 192.168.7.3
    netmask 255.255.255.0
    network 192.168.7.0
    gateway 192.168.7.1
After running 
 /etc/init.d/networking restart
It was still on 192.168.7.2.
I tryed rebotting, and yet is to no avail.

I tryed to change the IP address in /boot/uboot/scripts/setup-ubuntu-armhf-3.8.13-bone30.sh, but basicly this file overwrites /etc/network/interfaces.
Still after reboot the IP is still 192.168.7.2.

Edit:
Also tryed to change the IP in: 
/media/Angstrom/usr/bin/g-ether-load.sh
/media/Angstrom/etc/udev/rules.d/udhcpd.rules
Which didn't work.

Tryed to change it in:
/opt/scripts/boot/am335x_evm.sh
And now the network is unreachable: 
 ssh: connect to host 192.168.7.3 port 22: Network is unreachable

解决方案
After much search and trying i conclude that this cannot be done in any simple way. 

                        
这篇关于改变Beagle Bone Black USB0的静态IP的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！