在Windows上安装Chef Server [英] Installing Chef Server on Windows
本文介绍了在Windows上安装Chef Server的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我正在关注这个过程：
我试图让Chef Server启动并运行在Windows 2008 Server的服务器上。 a href =http://wiki.opscode.com/display/chef/Installing+Chef+Server+Manually =nofollow> http://wiki.opscode.com/display/chef/Installing+Chef+ Server + Manually
我刚刚安装了Gecode，下一步是ruby命令：
<然后，运行这个命令，然后运行这个命令，然后运行这个命令，然后运行这个命令。
$ b
C：\ Users \Administrator> gem install chef-服务器chef-server-api chef-server chef-
solr
暂时增强PATH以包含DevKit ...
构建本机扩展。这可能需要一段时间...
错误：安装厨师服务器时出错：
错误：无法构建gem原生扩展。
C：/opscode/chef/embedded/bin/ruby.exe extconf.rb
在-lgecodesearch中检查main（）... no
===== ================================================== =========================
=========
必须安装Gecode> 3.5（ http://www.gecode.org/）。
OSX：
brew安装gecode
为方便起见，我们为Debian / Ubuntu构建了Gecode（< release>清晰或m
averick ）：
将以下两行添加到/etc/apt/sources.list.d/opscode.list：
deb http://apt.opscode.com< release> main
deb-src http://apt.opscode.com< release> main
然后运行：
curl http://apt.opscode.com/packages@opscode.com.gpg.key | sudo apt-key add
-
sudo apt-get update
sudo apt-get install libgecode-dev
$ b其他发行版可以从源代码构建。
============================================== ==================================
=========
*** extconf.rb失败***
由于某种原因无法创建Makefile，可能缺少
必需的库和/或头文件。查看mkmf.log文件以获取更多
的详细信息。您可能需要配置选项。
提供的配置选项：
--with-opt-dir
--without-opt-dir
--with-opt-include
- -without-opt-include = $ {opt-dir} / include
--with-opt-lib
--without-opt-lib = $ {opt-dir} / lib
--with-make-prog
--without-make-prog
--srcdir =。
--curdir
--ruby = C：/ opscode / chef / embedded / bin / ruby
--with-gecodesearchlib
--without-gecodesearchlib
extconf .rb：57：在< main>中：Gecode未安装（RuntimeError）
Gem文件将保留安装在C：/ opscode / chef / embedded / lib / ruby /宝石/ 1.9.1 /
宝石/ dep_selector-0.0.8进行检查。
记录到C的结果：/opscode/chef/embedded/lib/ruby/gems/1.9.1/gems/dep_selector
-0.0.8 / ext / dep_gecode / gem_make.out
Building本地扩展。这可能需要一段时间...
错误：安装chef-server-api时出错：
错误：无法构建gem本机扩展。
C：/opscode/chef/embedded/bin/ruby.exe extconf.rb
在-lgecodesearch中检查main（）... no
===== ================================================== =========================
=========
必须安装Gecode> 3.5（ http://www.gecode.org/）。
OSX：
brew安装gecode
为方便起见，我们为Debian / Ubuntu构建了Gecode（< release>清晰或m
averick ）：
将以下两行添加到/etc/apt/sources.list.d/opscode.list：
deb http://apt.opscode.com< release> main
deb-src http://apt.opscode.com< release> main
然后运行：
curl http://apt.opscode.com/packages@opscode.com.gpg.key | sudo apt-key add
-
sudo apt-get update
sudo apt-get install libgecode-dev
我使用默认选项安装了3.7.3版本。
任何人都知道我可以如何继续？我对Ruby或Gecode一无所知。
TIA
解决方案
Windows上不支持Chef服务器。
I'm trying to get a Chef Server up and running on a Windows 2008 Server box.
I'm following the process here: http://wiki.opscode.com/display/chef/Installing+Chef+Server+Manually
I've just installed Gecode and the next step is a ruby command:
gem install chef-server chef-server-api chef-server chef-solr
However, running this command gives the following output suggesting that Gecode isn't installed.
C:\Users\Administrator>gem install chef-server chef-server-api chef-server chef-
solr
Temporarily enhancing PATH to include DevKit...
Building native extensions. This could take a while...
ERROR: Error installing chef-server:
ERROR: Failed to build gem native extension.
C:/opscode/chef/embedded/bin/ruby.exe extconf.rb
checking for main() in -lgecodesearch... no
================================================================================
=========
Gecode >3.5 must be installed (http://www.gecode.org/).
OSX:
brew install gecode
For convenience, we have built Gecode for Debian/Ubuntu (<release> is lucid or m
averick):
Add the following two lines to /etc/apt/sources.list.d/opscode.list:
deb http://apt.opscode.com <release> main
deb-src http://apt.opscode.com <release> main
Then run:
curl http://apt.opscode.com/packages@opscode.com.gpg.key | sudo apt-key add
-
sudo apt-get update
sudo apt-get install libgecode-dev
Other distributions can build from source.
================================================================================
=========
*** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of
necessary libraries and/or headers. Check the mkmf.log file for more
details. You may need configuration options.
Provided configuration options:
--with-opt-dir
--without-opt-dir
--with-opt-include
--without-opt-include=${opt-dir}/include
--with-opt-lib
--without-opt-lib=${opt-dir}/lib
--with-make-prog
--without-make-prog
--srcdir=.
--curdir
--ruby=C:/opscode/chef/embedded/bin/ruby
--with-gecodesearchlib
--without-gecodesearchlib
extconf.rb:57:in `<main>': Gecode not installed (RuntimeError)
Gem files will remain installed in C:/opscode/chef/embedded/lib/ruby/gems/1.9.1/
gems/dep_selector-0.0.8 for inspection.
Results logged to C:/opscode/chef/embedded/lib/ruby/gems/1.9.1/gems/dep_selector
-0.0.8/ext/dep_gecode/gem_make.out
Building native extensions. This could take a while...
ERROR: Error installing chef-server-api:
ERROR: Failed to build gem native extension.
C:/opscode/chef/embedded/bin/ruby.exe extconf.rb
checking for main() in -lgecodesearch... no
================================================================================
=========
Gecode >3.5 must be installed (http://www.gecode.org/).
OSX:
brew install gecode
For convenience, we have built Gecode for Debian/Ubuntu (<release> is lucid or m
averick):
Add the following two lines to /etc/apt/sources.list.d/opscode.list:
deb http://apt.opscode.com <release> main
deb-src http://apt.opscode.com <release> main
Then run:
curl http://apt.opscode.com/packages@opscode.com.gpg.key | sudo apt-key add
-
sudo apt-get update
sudo apt-get install libgecode-dev
I installed version 3.7.3 with the default options.
Anyone have an idea how I can proceed? I don't know anything about Ruby or Gecode.
TIA
解决方案
Chef server is not supported on Windows.
这篇关于在Windows上安装Chef Server的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
