Mandrake 9.1 / 9.2上的DB2 V8.1 [英] DB2 V8.1 on Mandrake 9.1/9.2
问题描述
有没有人设法让DB2 V8.1在Linux Mandrake上安装和运行
9.1 / 9.2？
我知道IBM没有正式在Mandrake上支持DB2，但我也知道，购买DB2的聪明人有时会找到一种方法来处理不支持
的事情。不幸的是，我不是那么聪明，特别是关于
安装东西。我最后一次尝试在Mandrake上安装DB2 V8.1时，我b $ b遇到了一个我无法克服的障碍。尝试通过db2icrt创建第一个DB2实例时有明显的
权限问题
但是我甚至无法通过降低msec然后将其转换来克服它们
完全关闭。
现在它已经过了一年，并且有更多的DB2 V8.1经验，
我想要再试一次，但前提是我得到一些好消息
其他人已经设法在Mandrake 9.1 / 9.2上安装了V8.1。如果你已经设法做到这一点，我非常想知道你做了什么来获得实例创建的问题和其他任何可预测的问题
我从来没有遇到的问题。
我昨天向一个非常活跃的Mandrake新闻组发布了同样的问题
但是没有人回复所以我想我现在就试试吧。
-
犀牛
---
rhino1 AT sympatico DOT ca
有两种构建软件设计的方法。一种方法是使它变得如此简单，以至于显然没有任何缺陷。而另一种方式是使b / b $ b变得如此复杂以至于没有明显的缺陷。 - CAR
Hoare
Has anyone managed to get DB2 V8.1 to install and run on Linux Mandrake
9.1/9.2?
I know that IBM does not officially support DB2 on Mandrake but I also know
that the clever people who buy DB2 sometimes find a way to do things that
aren''t supported. Unfortunately, I''m not that clever, especially about
installing things. The last time I tried to install DB2 V8.1 on Mandrake, I
hit a roadblock that I wasn''t able to overcome. There were apparent
permissions issues when trying to create the first DB2 instance via db2icrt
but I was unable to overcome them even by lowering msec and then turning it
off entirely.
Now that it''s a year later and there is lots more experience with DB2 V8.1,
I would like to give it another try but only if I get some good news that
others have actually managed to install V8.1 on Mandrake 9.1/9.2. If you
have managed to do this, I would dearly love to know what you did to get
around the problems with the instance creation - and any other predictable
problems that I never got to.
I posted this same question to a very active Mandrake newsgroup yesterday
but no one has replied to it so I thought I''d try here now.
--
Rhino
---
rhino1 AT sympatico DOT ca
"There are two ways of constructing a software design. One way is to make it
so simple that there are obviously no deficiencies. And the other way is to
make it so complicated that there are no obvious deficiencies." - C.A.R.
Hoare
推荐答案
我不认为DB2正式支持Mandrake：
http://www-306.ibm。 com / software / data ... inux / validate /
Rhino写道：
I don''t think DB2 officially supports Mandrake:
http://www-306.ibm.com/software/data...inux/validate/
Rhino wrote:
有没有人设法获得DB2 V8 .1在Linux上安装和运行Mandrake
9.1 / 9.2？
我知道IBM没有正式支持Mandrake上的DB2，但我也知道那个聪明的人买的DB2有时会找到一种方法来处理不受支持的事情。不幸的是，我不是那么聪明，特别是关于
安装东西。我最后一次尝试在Mandrake上安装DB2 V8.1时，我遇到了一个我无法克服的障碍。尝试通过db2icrt创建第一个DB2实例时有明显的权限问题
但是我甚至无法通过降低msec然后完全关闭它来克服它们。
<现在已经是一年之后了，有很多关于DB2 V8.1的经验，
我想再试一次，但前提是我得到一些好消息，其他人有实际上设法在Mandrake 9.1 / 9.2上安装V8.1。如果你已经设法做到了这一点，我非常想知道你做了什么来解决实例创建的问题 - 以及我从未得到的任何其他可预测的问题。
我昨天向一个非常活跃的Mandrake新闻组发布了同样的问题
但是没有人回复它，所以我想我现在就试试。
Has anyone managed to get DB2 V8.1 to install and run on Linux Mandrake
9.1/9.2?
I know that IBM does not officially support DB2 on Mandrake but I also know
that the clever people who buy DB2 sometimes find a way to do things that
aren''t supported. Unfortunately, I''m not that clever, especially about
installing things. The last time I tried to install DB2 V8.1 on Mandrake, I
hit a roadblock that I wasn''t able to overcome. There were apparent
permissions issues when trying to create the first DB2 instance via db2icrt
but I was unable to overcome them even by lowering msec and then turning it
off entirely.
Now that it''s a year later and there is lots more experience with DB2 V8.1,
I would like to give it another try but only if I get some good news that
others have actually managed to install V8.1 on Mandrake 9.1/9.2. If you
have managed to do this, I would dearly love to know what you did to get
around the problems with the instance creation - and any other predictable
problems that I never got to.
I posted this same question to a very active Mandrake newsgroup yesterday
but no one has replied to it so I thought I''d try here now.
是的，我理解 - 请看我原帖的第二句 - 我是
只是想知道它是否有效尽管缺乏官方支持。
犀牛
" Blair Adamache" < BA ******* @ 2muchspam.yahoo.com>在消息中写道
news：c8 ********** @ hanover.torolab.ibm.com ...
Yes, I understand that - see the second sentence of my original post - I''m
just trying to find out if it works despite the lack of official support.
Rhino
"Blair Adamache" <ba*******@2muchspam.yahoo.com> wrote in message
news:c8**********@hanover.torolab.ibm.com...
我不认为DB2官方支持Mandrake：
http://www-306.ibm.com/software/data...inux/validate/
Rhino写道：
I don''t think DB2 officially supports Mandrake:
http://www-306.ibm.com/software/data...inux/validate/
Rhino wrote:
有没有人设法让DB2 V8.1在Linux Mandrake上安装和运行
9.1 / 9.2？
我知道IBM在Mandrake上没有正式支持DB2，但我也是
知道购买DB2的聪明人有时会找到一种方法来做一些不受支持的事情。不幸的是，我不是那么聪明，特别是关于
安装东西。我最后一次尝试在
Mandrake上安装DB2 V8.1时遇到了一个我无法克服的障碍。尝试通过
db2icrt创建第一个DB2实例时有明显的
权限问题但是我甚至无法通过降低msec然后完全关闭
来克服它们。
<现在已经过了一年又有了更多关于DB2
V8.1的经验，我想再试一次，但前提是我得到一些好消息
其他人有实际上设法在Mandrake 9.1 / 9.2上安装V8.1。如果你已经设法做到这一点，我非常想知道你为了解决实例创建问题所做的工作 - 以及我从未得到的任何其他
可预测的问题。
昨天我把这个问题发给了一个非常活跃的Mandrake新闻组
，但没有人回复它，所以我想我现在就试试。
Has anyone managed to get DB2 V8.1 to install and run on Linux Mandrake
9.1/9.2?
I know that IBM does not officially support DB2 on Mandrake but I also know that the clever people who buy DB2 sometimes find a way to do things that aren''t supported. Unfortunately, I''m not that clever, especially about
installing things. The last time I tried to install DB2 V8.1 on Mandrake, I hit a roadblock that I wasn''t able to overcome. There were apparent
permissions issues when trying to create the first DB2 instance via db2icrt but I was unable to overcome them even by lowering msec and then turning it off entirely.
Now that it''s a year later and there is lots more experience with DB2 V8.1, I would like to give it another try but only if I get some good news that others have actually managed to install V8.1 on Mandrake 9.1/9.2. If you
have managed to do this, I would dearly love to know what you did to get
around the problems with the instance creation - and any other predictable problems that I never got to.
I posted this same question to a very active Mandrake newsgroup yesterday but no one has replied to it so I thought I''d try here now.
DB2肯定不支持使用Mandrake，如果您遇到问题并且有问题请致电技术支持，他们会感到非常沮丧，但是，我使用Mandrake 9.1 / 9.2 / 10.0作为我的工作站使用DB2并安装了
就好了。我已经安装了PE并测试了WSE。
Todd Huish
周五，2004年5月21日11:04:49 -0400 ，Rhino< rh **** @ NOSPAM.sympatico.ca>
写道：
DB2 definitly does not support using Mandrake and they get quite upset if
you have a problem and call tech support with a problem on it, however, I
have used Mandrake 9.1/9.2/10.0 as my workstation with DB2 and it installs
just fine. I have installed both the PE and tested the WSE.
Todd Huish
On Fri, 21 May 2004 11:04:49 -0400, Rhino <rh****@NOSPAM.sympatico.ca>
wrote:
是的，我明白了 - 看到我的第二句话原帖 -
我只是想知道它是否有效，尽管缺乏官方支持。
Rhino
布莱尔Adamache" < BA ******* @ 2muchspam.yahoo.com>在消息中写道
新闻：c8 ********** @ hanover.torolab.ibm.com ...
Yes, I understand that - see the second sentence of my original post -
I''m
just trying to find out if it works despite the lack of official support.
Rhino
"Blair Adamache" <ba*******@2muchspam.yahoo.com> wrote in message
news:c8**********@hanover.torolab.ibm.com...
我不认为DB2正式支持Mandrake：
http：/ /www-306.ibm.com/software/data...inux/validate/
Rhino写道：
I don''t think DB2 officially supports Mandrake:
http://www-306.ibm.com/software/data...inux/validate/
Rhino wrote:
>有没有人设法让DB2 V8.1在Linux上安装和运行
> Has anyone managed to get DB2 V8.1 to install and run on Linux
Mandrake
Mandrake
> 9.1 / 9.2？
>
>我知道IBM并没有正式支持Mandrake上的DB2，但我也知道>购买DB2的聪明人有时会找到一种方法来做>不支持。不幸的是，我不是那么聪明，特别是关于
>安装东西。我最后一次尝试在Mandrake上安装DB2 V8.1时，我>遇到了一个我无法克服的障碍。有明显的
>尝试通过db2icrt创建第一个DB2实例时的权限问题>但我无法克服它们，即使降低毫秒然后
> 9.1/9.2?
>
> I know that IBM does not officially support DB2 on Mandrake but I also know > that the clever people who buy DB2 sometimes find a way to do things that > aren''t supported. Unfortunately, I''m not that clever, especially about
> installing things. The last time I tried to install DB2 V8.1 on Mandrake, I > hit a roadblock that I wasn''t able to overcome. There were apparent
> permissions issues when trying to create the first DB2 instance via db2icrt > but I was unable to overcome them even by lowering msec and then
转动
它
>完全关闭。
>
>现在已经过了一年之后，DB2 V8.1有了更多的经验，>我想再试一次，但前提是我得到一些好消息>其他人实际上已经设法在Mandrake 9.1 / 9.2上安装V8.1。如果
> off entirely.
>
> Now that it''s a year later and there is lots more experience with DB2 V8.1, > I would like to give it another try but only if I get some good news that > others have actually managed to install V8.1 on Mandrake 9.1/9.2. If
你
>我设法做到了这一点，我非常想知道你做了什么
> have managed to do this, I would dearly love to know what you did to
得到
>围绕实例创建的问题 - 以及任何其他可预测的>我从来没有遇到的问题。
>
>我昨天向一个非常活跃的Mandrake新闻组发布了同样的问题>但是没有人回复它，所以我想我现在就试试吧。
>
> around the problems with the instance creation - and any other predictable > problems that I never got to.
>
> I posted this same question to a very active Mandrake newsgroup yesterday > but no one has replied to it so I thought I''d try here now.
>
-
Todd Huish
--
Todd Huish
这篇关于Mandrake 9.1 / 9.2上的DB2 V8.1的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
