如何找出阻止远程桌面连接的内容 [英] How to find out what's blocking a Remote Desktop connection

问题描述

我设置了两个工作站，允许通过特定端口进行远程桌面连接，这些端口来自我的局域网和外部。两者都很完美。我在其中一个上干净地重新安装了Windows 10，现在无法从外部连接远程桌面。注册表配置正确，防火墙规则与工作工作站相同，连接在局域网内工作，而不是从外部工作。有关如何确定阻止连接的任何想法？

I had two workstations set up to allow Remote Desktop connections via specific ports, both from within my lan and from outside. Both were working perfectly. I did a clean re-install of Windows 10 on one of them and now cannot get Remote Desktop to connect from outside. Registry is configured properly, firewall rule is identical to the working workstation, and connections work from within the lan, just not from outside. Any thoughts on how to determine what's blocking the connection?

推荐答案

Windows根据传入请求的来源有不同的规则。

Every听网络的服务有一个私人/安全网络设置，另一个用于公共/不安全网络。

你也要检查防火墙和路由器。

Windows have different rules depending on the origin of the incoming request.
Every service that listen to the network have a setting for your private/secure network and another one for public/insecure network.
You have to check the firewall and router too.

解决方案很简单（愚蠢）：当我重新安装时，我忽略了重新建立固定IP地址，因此路由器中的端口转发不再能够从外部连接到我的机器。当我设置正确的IP地址时，一切正常。

The solution was simple (stupid): when I reinstalled I neglected to re-establish the fixed IP address, so the port forwarding in the router no longer could connect to my machine from outside. When I set the correct IP address, everything works fine.

这篇关于如何找出阻止远程桌面连接的内容的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！