Raspberry Pi SD卡分区 [英] Raspberry Pi SD card partitions
问题描述
您好,我的RB Pi3上的
我从MS提供的图像中安装了Win10IoT。当我查看分区时,我看到一个是驱动器C:它有大约500MB的可用空间。
建议使用至少16GB的卡,安装操作系统后还有一个大约14GB的分区。但是这个空间似乎无法使用,我看不到任何驱动器号。
我系统中唯一可访问的驱动器是C:,我的限制为500MB。
如何使用BIG分区?谁可以给出一个简短的解释?
谢谢和亲切的问候
Thomas
Hello Thomas Schattat,
有一个数据分区(用户数据分区) 使用设备上剩余的存储空间。它默认具有最大的空间。请参阅物联网设备
布局。
类似的问题:" 使用microSD卡上的所有存储空间"。
如果有帮助请告诉我。
祝你好运,
Rita
Hello,
on my RB Pi3 I installed Win10IoT from the MS supplied image. When I look at the partitions I see one that is drive C: that has roughly 500MB free space.
A card of at least 16GB is recommended, that has another partition of about 14GB after installation of the OS. However this space seems to be unusable, I cannot see any drive letter there.
The only accessible drive in my system is C:, it is limited to 500MB for my.
How can I use the BIG partition? Who can give a short explanation?
Thanks and kind regards
Thomas
Hello Thomas Schattat,
There is a Data partition (User data partition) use the remainder of the storage space on the device. It has largest space by default. Refer to IoT Device Layout.
Similar issue: "Use all storage available on microSD card".
Please let me know if it helps.
Best regards,
Rita
这篇关于Raspberry Pi SD卡分区的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!