MIPS:将BEQ计算为十六进制机器代码 [英] MIPS: Calculating BEQ into Hexadecimal Machine Code

问题描述

我有一个作业，我必须将MIPS指令转换成其十六进制机器代码.我知道如何转换add，addi，lw等指令就好了，但是当涉及到beq等指令时，我会感到困惑.我如何将这个beq转换为十六进制?

I have an assignment where I have to convert MIPS instructions into its hexadecimal machine code. I know how to convert the add, addi, lw, etc. instructions just fine, but when it gets to instructions like beq, I get confused. How would I convert this beq to hex?

0x00400108   beq $t3, $t5, NEXT
0x0040010C   j END

NEXT的地址是

0x0040011C

?

我尝试过的事情:

beq操作码= 4

beq opcode = 4

$ t3 =寄存器11

$t3 = register 11

$ t5 =寄存器13

$t5 = register 13

NEXT = 0x0040011C-0x0040010C = 10(十六进制)= 16(十进制)

NEXT = 0x0040011C - 0x0040010C = 10 (hex) = 16 (decimal)

4 11 13 16 (decimal)
000100 01011 01101 0000 0000 0000 1000 (convert to binary)
0001 0001 0110 1101 0000 0000 0000 1000 (group into fours)
1 1 6 D 0 0 0 8 (hexadecimal)

但这是错误的...

推荐答案

在花了很长时间哑巴之后，我找到了正确的答案.

After spending a long time being dumb, I've found the correct answer.

摘要代码:

beq $t3, $t5, NEXT
[instruction 1]
[instruction 2]
[instruction 3]
[instruction 4]
NEXT: [instruction 5]

正如迈克尔所说，偏移量是分支指令之后的指令中的字数.指令1是beq之后的以下指令，因此从此处开始计数，直到NEXT.指令1和NEXT中有4条指令，因此beq的格式为:

As Michael said, the offset is the number of words from the instruction following the branch instruction. Instruction 1 is the following instruction after beq, so start counting from there till NEXT. There are 4 instructions from instruction 1 and NEXT, so the format for beq is now:

op     |  rs   |  rd   |  16-bit constant or address
000100 | 01011 | 01101 | 0000 0000 0001 0000

其中rs是$ t3，而rd是$ t5.

Where rs is $t3 and rd is $t5.

重新组合并转换为十六进制:

Regrouped and converted into hex:

0001 | 0001 | 0110 | 1101 | 0000 0000 0001 0000
  1  |  1   |  6   |  D   |   0    0   1     0

因此十六进制表示为116D0010.干杯. 指令是单词，4条指令* 4字节= 16字节

So the hexadecimal representation is 116D0010. Cheers. Instructions are Words, 4 Instructions * 4 Bytes = 16 bytes

这篇关于MIPS:将BEQ计算为十六进制机器代码的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！