Python非ASCII字符 [英] Python non-ascii characters

问题描述

我有一个python文件，该文件创建并填充ms sql中的表.唯一的问题是，如果有任何非ASCII字符或单撇号(每个都有很多)，代码就会中断.尽管我可以运行replace函数来消除撇号字符串，但我还是希望它们保持完整.我也尝试过将数据转换为utf-8，但也没有运气.

I have a python file that creates and populates a table in ms sql. The only sticking point is that the code breaks if there are any non-ascii characters or single apostrophes (and there are quite a few of each). Although I can run the replace function to rid the strings of apostrophes, I would prefer to keep them intact. I have also tried converting the data into utf-8, but no luck there either.

以下是我收到的错误消息:

Below are th error messages I get:

"'ascii' codec can't encode character u'\2013' in position..." (for non-ascii characters)

以及单引号

class 'pyodbc.ProgrammingError'>: ('42000', "[42000] [Microsoft][ODBC SQL Server Driver][SQL Server] Incorrect syntax near 'S, 230 X 90M.; Eligibilty....  

当我尝试在utf-8中编码字符串时，我却收到以下错误消息:

When I try to encode string in utf-8, I instead get the following error message:

<type 'exceptions.UnicodeDecodeError'>: ascii' codec can't decode byte 0xe2 in position 219: ordinal not in range(128)

以下包含python代码.我相信代码中发生此中断的地方是在以下行之后:InsertValue = str(row.GetValue(CurrentField ['Name'])).

The python code is included below. I believe the point in the code where this break occurs is after the following line: InsertValue = str(row.GetValue(CurrentField['Name'])).

# -*- coding: utf-8 -*-

import pyodbc
import sys
import arcpy
import arcgisscripting

gp = arcgisscripting.create(9.3)
SQL_KEYWORDS = ['PERCENT', 'SELECT', 'INSERT', 'DROP', 'TABLE']

#SourceFGDB = '###'
#SourceTable = '###'
SourceTable = sys.argv[1]
TempInputName = sys.argv[2]
SourceTable2 = sys.argv[3]
#---------------------------------------------------------------------------------------------------------------------
# Target Database Settings
#---------------------------------------------------------------------------------------------------------------------
TargetDatabaseDriver = "{SQL Server}"
TargetDatabaseServer = "###"
TargetDatabaseName = "###"
TargetDatabaseUser = "###"
TargetDatabasePassword = "###"

# Get schema from FGDB table.
# This should be an ordered list of dictionary elements [{'FGDB_Name', 'FGDB_Alias', 'FGDB_Type', FGDB_Width, FGDB_Precision, FGDB_Scale}, {}]

if not gp.Exists(SourceTable):
    print ('- The source does not exist.')
    sys.exit(102)
#### Should see if it is actually a table type.  Could be a Feature Data Set or something...
print('        - Processing Items From : ' + SourceTable)
FieldList = []
Field_List = gp.ListFields(SourceTable)
print('            - Getting number of rows.')
result = gp.GetCount_management(SourceTable)
Number_of_Features = gp.GetCount_management(SourceTable)
print('                - Number of Rows: ' + str(Number_of_Features))
print('            - Getting fields.')
Field_List1 = gp.ListFields(SourceTable, 'Layer')
Field_List2 = gp.ListFields(SourceTable, 'Comments')
Field_List3 = gp.ListFields(SourceTable, 'Category')
Field_List4 = gp.ListFields(SourceTable, 'State')
Field_List5 = gp.ListFields(SourceTable, 'Label')
Field_List6 = gp.ListFields(SourceTable, 'DateUpdate')
Field_List7 = gp.ListFields(SourceTable, 'OBJECTID')
for Current_Field in Field_List1 + Field_List2 + Field_List3 + Field_List4 + Field_List5 + Field_List6 + Field_List7:
        print('            - Field Found: ' + Current_Field.Name)
        if Current_Field.AliasName in SQL_KEYWORDS:
            Target_Name = Current_Field.Name + '_'
        else:
            Target_Name = Current_Field.Name

        print('                 - Alias    : ' + Current_Field.AliasName)
        print('                 - Type     : ' + Current_Field.Type)
        print('                 - Length   : ' + str(Current_Field.Length))
        print('                 - Scale    : ' + str(Current_Field.Scale))
        print('                 - Precision: ' + str(Current_Field.Precision))
        FieldList.append({'Name': Current_Field.Name, 'AliasName': Current_Field.AliasName, 'Type': Current_Field.Type, 'Length': Current_Field.Length, 'Scale': Current_Field.Scale, 'Precision': Current_Field.Precision, 'Unique': 'UNIQUE', 'Target_Name': Target_Name})
# Create table in SQL Server based on FGDB table schema.
cnxn = pyodbc.connect(r'DRIVER={SQL Server};SERVER=###;DATABASE=###;UID=sql_webenvas;PWD=###')
cursor = cnxn .cursor()
#### DROP the table first?
try:
    DropTableSQL = 'DROP TABLE dbo.' + TempInputName + '_Test;'
    print DropTableSQL
    cursor.execute(DropTableSQL)
    dbconnection.commit()
except:
    print('WARNING: Can not drop table - may not exist: ' + TempInputName + '_Test')
CreateTableSQL = ('CREATE TABLE  ' + TempInputName + '_Test '
' (Layer varchar(500), Comments varchar(5000), State int, Label varchar(500), DateUpdate DATETIME, Category varchar(50), OBJECTID int)')
cursor.execute(CreateTableSQL)
cnxn.commit()
# Cursor through each row in the FGDB table, get values, and insert into the SQL Server Table.
# We got Number_of_Features earlier, just use that.
Number_Processed = 0
print('        - Processing ' + str(Number_of_Features) + ' features.')
rows = gp.SearchCursor(SourceTable)
row = rows.Next()
while row:
    if Number_Processed % 10000 == 0:
        print('            - Processed ' + str(Number_Processed) + ' of ' + str(Number_of_Features))
    InsertSQLFields = 'INSERT INTO ' + TempInputName + '_Test ('
    InsertSQLValues = 'VALUES ('
    for CurrentField in FieldList:
        InsertSQLFields = InsertSQLFields + CurrentField['Target_Name'] + ', '
        InsertValue = str(row.GetValue(CurrentField['Name']))
        if InsertValue in ['None']:
            InsertValue = 'NULL'
        # Use an escape quote for the SQL.
        InsertValue = InsertValue.replace("'","' '")
        if CurrentField['Type'].upper() in ['STRING', 'CHAR', 'TEXT']:
            if InsertValue == 'NULL':
                InsertSQLValues = InsertSQLValues + "NULL, "
            else:
                InsertSQLValues = InsertSQLValues + "'" + InsertValue + "', "
        elif CurrentField['Type'].upper() in ['GEOMETRY']:
            ## We're not handling geometry transfers at this time.
            if InsertValue == 'NULL':
                InsertSQLValues = InsertSQLValues + '0' + ', '
            else:
                InsertSQLValues = InsertSQLValues + '1' + ', '
        else:
            InsertSQLValues = InsertSQLValues + InsertValue + ', '
    InsertSQLFields = InsertSQLFields[:-2] + ')'
    InsertSQLValues = InsertSQLValues[:-2] + ')'
    InsertSQL = InsertSQLFields + ' ' + InsertSQLValues
    ## print InsertSQL
    cursor.execute(InsertSQL)
    cnxn.commit()
    Number_Processed = Number_Processed + 1
    row = rows.Next()
print('            - Processed all ' + str(Number_Processed))
del row
del rows

推荐答案

James，我认为真正的问题是您没有使用Unicode.尝试执行以下操作:

James, I believe the real issue is that your are not using Unicode accross the board. Try to do the following:

• 确保用于填充数据库的输入文件位于UTF-8中，并且正在使用UTF-8编码器进行读取.
• 确保您的数据库实际将数据存储为Unicode
• 当您从文件或数据库中检索数据或要操纵字符串(例如，使用+运算符)时，您需要确保所有部分都是正确的Unicode.您不能使用str()方法.正如戴夫指出的那样，您需要使用unicode().如果您在代码中定义字符串，请使用我的字符串"而不是我的字符串"(否则将不被视为unicode).

另外，请向我们提供完整的堆栈跟踪和异常名称.

Also, please provide us the full stack trace and the exception name.

这篇关于Python非ASCII字符的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！