Mac OS 10.9 不显示 Arduino 的 USB 调制解调器 [英] Mac OS 10.9 doesn't display USB modem for Arduino
问题描述
我正在尝试在我的 Arduino Lenardo
设备上选择 /dev/tty.usbmodem
.操作系统为 Mac OSX 10.9.
I am trying to select /dev/tty.usbmodem
on my Arduino Lenardo
device. The OS is Mac OSX 10.9.
问题是它没有显示.我什至尝试安装 FTDI 但它没有用.
The problem is that it isn't displaying. I even tried installing FTDI but it was no use.
更新:
sh-3.2# dmesg
luetoothUSBDFU::probe
IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0042
**** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xdc00 ****
**** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xdc00 ****
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xdc00
[IOBluetoothHCIController::setConfigState] calling registerService
**** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0xe780 -- 0x3000 -- 0xdc00 ****
DSMOS has arrived
mTail has not been written to hardware: mTail = 0x00000000, hardare tail register = 0x00000040
flow_divert_kctl_disconnect (0): disconnecting group 1
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
createVirtIf(): ifRole = 1
in func createVirtualInterface ifRole = 1
AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
Created virtif 0xffffff80174ed400 p2p0
en1: 802.11d country code set to 'TW'.
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
hfs: mounted Recovery HD on device disk0s3
hfs: unmount initiated on Recovery HD on device disk0s3
MacAuthEvent en1 Auth result for: c8:3a:35:54:c7:b9 MAC AUTH succeeded
wlEvent: en1 en1 Link UP virtIf = 0
AirPort: Link Up on en1
en1: BSSID changed to c8:3a:35:54:c7:b9
AirPort: RSN handshake complete on en1
flow_divert_kctl_disconnect (0): disconnecting group 1
AppleKeyStore:Sending lock change 0
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 1000] [com.apple.message.signature2 53a18aae61685cc356b171ce37cc504048ed45a1] [com.apple.message.signature3 b928c695e1e1a867d5fc392eb8f09e460f3139af] [com.apple.message.summarize YES]
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 343] [com.apple.message.signature3 GoogleSoftwareUp] [com.apple.message.summarize YES]
CODE SIGNING: cs_invalid_page(0x1000): p=343[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0PS (kSMCKeyNotFound)
SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0OS (kSMCKeyNotFound)
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
MacAuthEvent en1 Auth result for: c8:3a:35:54:c7:b9 MAC AUTH succeeded
wlEvent: en1 en1 Link UP virtIf = 0
AirPort: RSN handshake complete on en1
wl0: Roamed or switched channel, reason #8, bssid c8:3a:35:54:c7:b9
en1: BSSID changed to c8:3a:35:54:c7:b9
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 1000] [com.apple.message.signature2 3345639bd98273913ff25086fe0151f45fea0fa3] [com.apple.message.signature3 38872323d4adae2cb310de88ceeeae695630ffd7] [com.apple.message.summarize YES]
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 866] [com.apple.message.signature3 ksadmin] [com.apple.message.summarize YES]
CODE SIGNING: cs_invalid_page(0x1000): p=866[ksadmin] final status 0x0, allow (remove VALID)ing page
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 868] [com.apple.message.signature3 ksadmin] [com.apple.message.summarize YES]
CODE SIGNING: cs_invalid_page(0x1000): p=868[ksadmin] final status 0x0, allow (remove VALID)ing page
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 973] [com.apple.message.signature3 GoogleSoftwareUp] [com.apple.message.summarize YES]
CODE SIGNING: cs_invalid_page(0x1000): p=973[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 1000] [com.apple.message.signature2 53a18aae61685cc356b171ce37cc504048ed45a1] [com.apple.message.signature3 b928c695e1e1a867d5fc392eb8f09e460f3139af] [com.apple.message.summarize YES]
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 1215] [com.apple.message.signature3 GoogleSoftwareUp] [com.apple.message.summarize YES]
CODE SIGNING: cs_invalid_page(0x1000): p=1215[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 1000] [com.apple.message.signature2 53a18aae61685cc356b171ce37cc504048ed45a1] [com.apple.message.signature3 b928c695e1e1a867d5fc392eb8f09e460f3139af] [com.apple.message.summarize YES]
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 1549] [com.apple.message.signature3 GoogleSoftwareUp] [com.apple.message.summarize YES]
CODE SIGNING: cs_invalid_page(0x1000): p=1549[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 1781] [com.apple.message.signature3 GoogleSoftwareUp] [com.apple.message.summarize YES]
CODE SIGNING: cs_invalid_page(0x1000): p=1781[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 1000] [com.apple.message.signature2 53a18aae61685cc356b171ce37cc504048ed45a1] [com.apple.message.signature3 b928c695e1e1a867d5fc392eb8f09e460f3139af] [com.apple.message.summarize YES]
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 1988] [com.apple.message.signature3 GoogleSoftwareUp] [com.apple.message.summarize YES]
CODE SIGNING: cs_invalid_page(0x1000): p=1988[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 1000] [com.apple.message.signature2 53a18aae61685cc356b171ce37cc504048ed45a1] [com.apple.message.signature3 b928c695e1e1a867d5fc392eb8f09e460f3139af] [com.apple.message.summarize YES]
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 2209] [com.apple.message.signature3 GoogleSoftwareUp] [com.apple.message.summarize YES]
CODE SIGNING: cs_invalid_page(0x1000): p=2209[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
USBF: 23925.735 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 23928.637 The IOUSBFamily was not able to enumerate a device.
USBF: 23929.798 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 23930.235 The IOUSBFamily was not able to enumerate a device.
USBF: 23931.688 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 23934.686 The IOUSBFamily was not able to enumerate a device.
USBF: 23935.528 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 23938.926 The IOUSBFamily was not able to enumerate a device.
USBF: 23939.752 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 23940.583 The IOUSBFamily gave up enumerating a USB device after 10 retries. (Port 2 of Hub at 0xfd100000)
USBF: 23940.583 The IOUSBFamily was not able to enumerate a device.
USBF: 23943.529 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 23943.529 The IOUSBFamily was not able to enumerate a device.
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 1000] [com.apple.message.signature2 53a18aae61685cc356b171ce37cc504048ed45a1] [com.apple.message.signature3 b928c695e1e1a867d5fc392eb8f09e460f3139af] [com.apple.message.summarize YES]
0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 2478] [com.apple.message.signature3 GoogleSoftwareUp] [com.apple.message.summarize YES]
CODE SIGNING: cs_invalid_page(0x1000): p=2478[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
MacAuthEvent en1 Auth result for: c8:3a:35:54:c7:b9 MAC AUTH succeeded
wlEvent: en1 en1 Link UP virtIf = 0
wl0: Roamed or switched channel, reason #8, bssid c8:3a:35:54:c7:b9
en1: BSSID changed to c8:3a:35:54:c7:b9
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
MacAuthEvent en1 Auth result for: c8:3a:35:54:c7:b9 MAC AUTH succeeded
wlEvent: en1 en1 Link UP virtIf = 0
wl0: Roamed or switched channel, reason #8, bssid c8:3a:35:54:c7:b9
en1: BSSID changed to c8:3a:35:54:c7:b9
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
wlEvent: en1 en1 Link DOWN virtIf = 0
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
flow_divert_kctl_disconnect (0): disconnecting group 1
flow_divert_kctl_disconnect (0): disconnecting group 1
MacAuthEvent en1 Auth result for: c8:3a:35:54:c7:b9 MAC AUTH succeeded
wlEvent: en1 en1 Link UP virtIf = 0
AirPort: Link Up on en1
en1: BSSID changed to c8:3a:35:54:c7:b9
wlEvent: en1 en1 Link DOWN virtIf = 0
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
MacAuthEvent en1 Auth result for: c8:3a:35:54:c7:b9 MAC AUTH succeeded
wlEvent: en1 en1 Link UP virtIf = 0
AirPort: Link Up on en1
en1: BSSID changed to c8:3a:35:54:c7:b9
wlEvent: en1 en1 Link DOWN virtIf = 0
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
MacAuthEvent en1 Auth result for: c8:3a:35:54:c7:b9 MAC AUTH succeeded
wlEvent: en1 en1 Link UP virtIf = 0
AirPort: Link Up on en1
en1: BSSID changed to c8:3a:35:54:c7:b9
wlEvent: en1 en1 Link DOWN virtIf = 0
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
en1: 802.11d country code set to 'X2'.
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
en1: 802.11d country code set to 'TW'.
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
MacAuthEvent en1 Auth result for: c8:3a:35:54:c7:b9 MAC AUTH succeeded
wlEvent: en1 en1 Link UP virtIf = 0
AirPort: Link Up on en1
en1: BSSID changed to c8:3a:35:54:c7:b9
AirPort: RSN handshake complete on en1
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
flow_divert_kctl_disconnect (0): disconnecting group 1
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
ttyioss12000000: enqueueData rtn (e00002d8)
ttyioss12000000: enqueueData rtn (e00002d8)
USBF: 25854.340 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 25857.339 The IOUSBFamily was not able to enumerate a device.
USBF: 25858.179 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 25861.579 The IOUSBFamily was not able to enumerate a device.
ttyioss12000000: enqueueData rtn (e00002d8)
ttyioss12000000: enqueueData rtn (e00002d8)
USBF: 25862.402 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 25863.237 The IOUSBFamily gave up enumerating a USB device after 10 retries. (Port 2 of Hub at 0xfd100000)
USBF: 25863.237 The IOUSBFamily was not able to enumerate a device.
ttyioss12000000: enqueueData rtn (e00002d8)
ttyioss12000000: enqueueData rtn (e00002d8)
USBF: 26089.162 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 26089.593 The IOUSBFamily was not able to enumerate a device.
USBF: 26090.343 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 26090.344 The IOUSBFamily was not able to enumerate a device.
USBF: 26092.428 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 26100.388 The IOUSBFamily was not able to enumerate a device.
USBF: 26101.231 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 26101.965 The IOUSBFamily was not able to enumerate a device.
USBF: 26124.500 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 26127.496 The IOUSBFamily was not able to enumerate a device.
USBF: 26128.340 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 26131.738 The IOUSBFamily was not able to enumerate a device.
USBF: 26132.565 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
USBF: 26133.396 The IOUSBFamily gave up enumerating a USB device after 10 retries. (Port 2 of Hub at 0xfd100000)
USBF: 26133.396 The IOUSBFamily was not able to enumerate a device.
sh-3.2#
推荐答案
断开 Arduino 与 Mac 的连接.在 Mac 上打开应用程序文件夹,启动终端".现在,在终端窗口中,输入dmesg".这将显示控制台日志.
Disconnect your Arduino from your Mac. Open the Applications folder on Mac, start "Terminal". Now, in the Terminal window, type "dmesg". This will show you the console log.
现在,插入您的 Arduino,然后重新运行 dmesg 命令.如果 OS" 检测到 Leonardo 以及为其创建的 OSX 设备,您应该会看到一条消息.(例如/dev/ttyUSB0)如果没有,则您的设备或电缆可能存在硬件问题...
Now, plug in your Arduino, and re-run the dmesg command. You should see a message if OS" has detected the Leonardo, and also the OSX device created for it. (eg /dev/ttyUSB0) If not, you may have a hardware problem with the device, or cable...
这篇关于Mac OS 10.9 不显示 Arduino 的 USB 调制解调器的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!